cgminer-bitaxe/driver-bitmain.c

/*
 * Copyright 2012-2013 Lingchao Xu <lingchao.xu@bitmaintech.com>
 * Copyright 2014-2015 Andrew Smith
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 3 of the License, or (at your option)
 * any later version.  See COPYING for more details.
 */

#include "config.h"
#include "compat.h"
#include "miner.h"

#ifndef LINUX

#ifdef USE_ANT_S1
static void ants1_detect(__maybe_unused bool hotplug)
{
}
#endif
#ifdef USE_ANT_S2
#ifdef USE_ANT_S3
static void ants3_detect(__maybe_unused bool hotplug)
{
}
#else
static void ants2_detect(__maybe_unused bool hotplug)
{
}
#endif
#endif

#else // LINUX

#include "elist.h"
#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
#include "usbutils.h"
#else
#define C_BITMAIN_READ 0
#define C_BITMAIN_DATA_RXSTATUS 0
#endif
#include "driver-bitmain.h"
#include "hexdump.c"
#include "util.h"
#include <fcntl.h>
#include <unistd.h>
#include <math.h>

#ifdef USE_ANT_S1
#define ANTDRV ants1_drv
#else
#ifdef USE_ANT_S3
#define ANTDRV ants3_drv
#else
#define ANTDRV ants2_drv
#endif
#endif

#define BITMAIN_CALC_DIFF1	1

char *opt_bitmain_options;
char *opt_set_bitmain_fan;
char *opt_bitmain_freq;
// Ignored
bool opt_bitmain_nobeeper;
bool opt_bitmain_notempoverctrl;

#ifdef USE_ANT_S2
bool opt_bitmain_checkall = false;
bool opt_bitmain_checkn2diff = false;
#ifndef USE_ANT_S3
char *opt_bitmain_dev;
#endif
#endif


bool opt_bitmain_hwerror = false;
bool opt_bitmain_beeper = false;
bool opt_bitmain_tempoverctrl = false;
bool opt_bitmain_homemode = false;
int opt_bitmain_temp = BITMAIN_TEMP_TARGET;
int opt_bitmain_workdelay = BITMAIN_WORK_DELAY;
int opt_bitmain_overheat = BITMAIN_TEMP_OVERHEAT;
int opt_bitmain_fan_min = BITMAIN_DEFAULT_FAN_MIN_PWM;
int opt_bitmain_fan_max = BITMAIN_DEFAULT_FAN_MAX_PWM;
bool opt_bitmain_auto;

static int option_offset = -1;

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
static unsigned char bit_swap_table[256] =
{
  0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
  0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
  0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
  0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
  0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
  0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
  0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
  0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
  0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
  0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
  0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
  0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
  0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
  0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
  0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
  0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
  0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
  0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
  0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
  0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
  0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
  0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
  0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
  0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
  0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
  0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
  0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
  0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
  0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
  0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
  0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
  0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
};
#define bitswap(x) (bit_swap_table[x])
#else
#define bitswap(x) (x)
#endif

// --------------------------------------------------------------
//      CRC16 check table
// --------------------------------------------------------------
const uint8_t chCRCHTalbe[] = // CRC high byte table
{
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41,
 0x00, 0xC1, 0x81, 0x40
};

const uint8_t chCRCLTalbe[] = // CRC low byte table
{
 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7,
 0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E,
 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9,
 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC,
 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3,
 0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32,
 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D,
 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38,
 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF,
 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26,
 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1,
 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4,
 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB,
 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA,
 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5,
 0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0,
 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97,
 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E,
 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89,
 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C,
 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83,
 0x41, 0x81, 0x80, 0x40
};

static uint16_t CRC16(const uint8_t* p_data, uint16_t w_len)
{
	uint8_t chCRCHi = 0xFF; // CRC high byte initialize
	uint8_t chCRCLo = 0xFF; // CRC low byte initialize
	uint16_t wIndex = 0;    // CRC cycling index

	while (w_len--) {
		wIndex = chCRCLo ^ *p_data++;
		chCRCLo = chCRCHi ^ chCRCHTalbe[wIndex];
		chCRCHi = chCRCLTalbe[wIndex];
	}
	return ((chCRCHi << 8) | chCRCLo);
}

static uint32_t num2bit(int num)
{
	if (num < 0 || num > 31)
		return 0;
	else
		return (((uint32_t)1) << (31 - num));
}

#ifdef USE_ANT_S1
static bool get_options(__maybe_unused int this_option_offset, int *baud,
			int *chain_num, int *asic_num, int *timeout,
			int *frequency, uint8_t *reg_data)
{
	char buf[BUFSIZ+1];
	char *ptr, *comma, *colon, *colon2, *colon3, *colon4, *colon5;
	size_t max;
	int tmp;

	if (opt_bitmain_options == NULL)
		buf[0] = '\0';
	else {
		// Always use the first set if more than one
		ptr = opt_bitmain_options;
		comma = strchr(ptr, ',');
		if (comma)
			*comma = '\0';
		max = strlen(ptr);
		if (max > BUFSIZ)
			max = BUFSIZ;
		memcpy(buf, ptr, max);
		buf[max] = '\0';
	}

	if (!(*buf))
		return false;

	colon = strchr(buf, ':');
	if (colon)
		*(colon++) = '\0';

	tmp = atoi(buf);
	switch (tmp) {
		case 115200:
			*baud = 115200;
			break;
		case 57600:
			*baud = 57600;
			break;
		case 38400:
			*baud = 38400;
			break;
		case 19200:
			*baud = 19200;
				break;
		default:
			quit(1, "Invalid bitmain-options for baud (%s) "
				"must be 115200, 57600, 38400 or 19200", buf);
	}

	if (colon && *colon) {
		colon2 = strchr(colon, ':');
		if (colon2)
			*(colon2++) = '\0';

		if (*colon) {
			tmp = atoi(colon);
			if (tmp > 0)
				*chain_num = tmp;
			else {
				quit(1, "Invalid bitmain-options for "
					"chain_num (%s) must be 1 ~ %d",
					colon, BITMAIN_DEFAULT_CHAIN_NUM);
			}
		}

		if (colon2 && *colon2) {
			colon3 = strchr(colon2, ':');
			if (colon3)
				*(colon3++) = '\0';

			tmp = atoi(colon2);
			if (tmp > 0 && tmp <= BITMAIN_DEFAULT_ASIC_NUM)
				*asic_num = tmp;
			else {
				quit(1, "Invalid bitmain-options for "
					"asic_num (%s) must be 1 ~ %d",
					colon2, BITMAIN_DEFAULT_ASIC_NUM);
			}

			if (colon3 && *colon3) {
				colon4 = strchr(colon3, ':');
				if (colon4)
					*(colon4++) = '\0';

				tmp = atoi(colon3);
				if (tmp > 0 && tmp <= 0xff)
					*timeout = tmp;
				else {
					quit(1, "Invalid bitmain-options for "
						"timeout (%s) must be 1 ~ %d",
						colon3, 0xff);
				}
				if (colon4 && *colon4) {
					colon5 = strchr(colon4, ':');
					if (colon5)
						*(colon5++) = '\0';

					tmp = atoi(colon4);
					if (tmp < BITMAIN_MIN_FREQUENCY ||
					    tmp > BITMAIN_MAX_FREQUENCY) {
						quit(1, "Invalid bitmain-options for frequency,"
							" must be %d <= frequency <= %d",
							BITMAIN_MIN_FREQUENCY,
							BITMAIN_MAX_FREQUENCY);
					} else
						*frequency = tmp;

					if (colon5 && *colon5) {
						if (strlen(colon5) > 8 ||
						    strlen(colon5)%2 != 0 ||
						    strlen(colon5)/2 == 0) {
							quit(1, "Invalid bitmain-options for"
								" reg data, must be hex now: %s",
								colon5);
						}
						memset(reg_data, 0, 4);
						if (!hex2bin(reg_data, colon5, strlen(colon5)/2)) {
							quit(1, "Invalid bitmain-options for reg"
								" data, hex2bin error now: %s",
								colon5);
						}
					}
				}
			}
		}
	}
	return true;
}
#else
static bool get_options(__maybe_unused int this_option_offset, int *baud,
			int *chain_num, int *asic_num)
{
	char buf[BUFSIZ+1];
	char *ptr, *comma, *colon, *colon2, *colon3;
	size_t max;
	int tmp;

	if (opt_bitmain_options == NULL)
		buf[0] = '\0';
	else {
		// Always use the first set if more than one
		ptr = opt_bitmain_options;
		comma = strchr(ptr, ',');
		if (comma)
			*comma = '\0';
		max = strlen(ptr);
		if (max > BUFSIZ)
			max = BUFSIZ;
		memcpy(buf, ptr, max);
		buf[max] = '\0';
	}

	if (!(*buf))
		return false;

	colon = strchr(buf, ':');
	if (colon)
		*(colon++) = '\0';

	tmp = atoi(buf);
	switch (tmp) {
		case 115200:
			*baud = 115200;
			break;
		case 57600:
			*baud = 57600;
			break;
		case 38400:
			*baud = 38400;
			break;
		case 19200:
			*baud = 19200;
				break;
		default:
			quit(1, "Invalid bitmain-options for baud (%s) "
				"must be 115200, 57600, 38400 or 19200", buf);
	}

	if (colon && *colon) {
		colon2 = strchr(colon, ':');
		if (colon2)
			*(colon2++) = '\0';

		if (*colon) {
			tmp = atoi(colon);
			if (tmp > 0)
				*chain_num = tmp;
			else {
				quit(1, "Invalid bitmain-options for "
					"chain_num (%s) must be 1 ~ %d",
					colon, BITMAIN_DEFAULT_CHAIN_NUM);
			}
		}

		if (colon2 && *colon2) {
			colon3 = strchr(colon2, ':');
			if (colon3)
				*(colon3++) = '\0';

			tmp = atoi(colon2);
			if (tmp > 0 && tmp <= BITMAIN_DEFAULT_ASIC_NUM)
				*asic_num = tmp;
			else {
				quit(1, "Invalid bitmain-options for "
					"asic_num (%s) must be 1 ~ %d",
					colon2, BITMAIN_DEFAULT_ASIC_NUM);
			}
		}
	}
	return true;
}
#endif

static int bitmain_set_txconfig(struct bitmain_txconfig_token *bm,
				uint8_t reset, uint8_t fan_eft, uint8_t timeout_eft, uint8_t frequency_eft,
				uint8_t voltage_eft, uint8_t chain_check_time_eft, uint8_t chip_config_eft,
				uint8_t hw_error_eft, uint8_t beeper_ctrl, uint8_t temp_over_ctrl,
				uint8_t home_mode, uint8_t chain_num, uint8_t asic_num,
				uint8_t fan_pwm_data, uint8_t timeout_data,
				uint16_t frequency, uint8_t *voltage, uint8_t chain_check_time,
				uint8_t chip_address, uint8_t reg_address, uint8_t * reg_data)
{
	uint16_t crc = 0;
	int datalen = 0;
#ifdef USE_ANT_S2
	uint8_t version = 0;
#endif
	uint8_t *sendbuf = (uint8_t *)bm;
	if (unlikely(!bm)) {
		applog(LOG_WARNING, "%s: %s() bm is null", ANTDRV.dname, __func__);
		return -1;
	}

	if (unlikely(timeout_data <= 0 || asic_num <= 0 || chain_num <= 0)) {
		applog(LOG_WARNING, "%s: %s() parameter invalid"
				    " timeout_data(%d) asic_num(%d) chain_num(%d)",
				    ANTDRV.dname, __func__,
				    (int)timeout_data, (int)asic_num, (int)chain_num);
		return -1;
	}

	datalen = sizeof(struct bitmain_txconfig_token);
	memset(bm, 0, datalen);

	bm->token_type = BITMAIN_TOKEN_TYPE_TXCONFIG;
#ifdef USE_ANT_S1
	bm->length = datalen-2;
#else
	bm->version = version;
	bm->length = datalen-4;
	bm->length = htole16(bm->length);
#endif
	bm->reset = reset;
	bm->fan_eft = fan_eft;
	bm->timeout_eft = timeout_eft;
	bm->frequency_eft = frequency_eft;
	bm->voltage_eft = voltage_eft;
	bm->chain_check_time_eft = chain_check_time_eft;
	bm->chip_config_eft = chip_config_eft;
	bm->hw_error_eft = hw_error_eft;

	// S1 doesn't use them, but avoid gcc warnings
	bm->beeper_ctrl = beeper_ctrl;
	bm->temp_over_ctrl = temp_over_ctrl;
	bm->fan_home_mode = home_mode;

#ifdef USE_ANT_S1
	sendbuf[2] = bitswap(sendbuf[2]);
#else
	sendbuf[4] = bitswap(sendbuf[4]);
	sendbuf[5] = bitswap(sendbuf[5]);
#endif

	bm->chain_num = chain_num;
	bm->asic_num = asic_num;
	bm->fan_pwm_data = fan_pwm_data;
	bm->timeout_data = timeout_data;

	bm->frequency = htole16(frequency);
#ifdef USE_ANT_S1
	bm->voltage = voltage[0];
#else
	bm->voltage[0] = voltage[0];
	bm->voltage[1] = voltage[1];
#endif
	bm->chain_check_time = chain_check_time;

	memcpy(bm->reg_data, reg_data, 4);
	bm->chip_address = chip_address;
	bm->reg_address = reg_address;

	crc = CRC16((uint8_t *)bm, datalen-2);
	bm->crc = htole16(crc);

#ifdef USE_ANT_S1
	applogsiz(LOG_DEBUG, 512, "%s: %s() reset(%d) faneft(%d) touteft(%d) freqeft(%d)"
			" volteft(%d) chainceft(%d) chipceft(%d) hweft(%d) mnum(%d)"
			" anum(%d) fanpwmdata(%d) toutdata(%d) freq(%d) volt(%d)"
			" chainctime(%d) regdata(%02x%02x%02x%02x) chipaddr(%02x)"
			" regaddr(%02x) crc(%04x)",
			ANTDRV.dname, __func__,
			(int)reset, (int)fan_eft, (int)timeout_eft, (int)frequency_eft,
			(int)voltage_eft, (int)chain_check_time_eft, (int)chip_config_eft,
			(int)hw_error_eft, (int)chain_num, (int)asic_num, (int)fan_pwm_data,
			(int)timeout_data, (int)frequency, (int)voltage[0], (int)chain_check_time,
			(int)reg_data[0], (int)reg_data[1], (int)reg_data[2], (int)reg_data[3],
			(int)chip_address, (int)reg_address, (int)crc);
#else
	applogsiz(LOG_DEBUG, 512, "%s: %s() v(%d) reset(%d) faneft(%d) touteft(%d) freqeft(%d)"
			" volteft(%d) chainceft(%d) chipceft(%d) hweft(%d)"
			" beepctrl(%d) toverctl(%d) home(%d) mnum(%d)"
			" anum(%d) fanpwmdata(%d) toutdata(%d) freq(%d) volt(%02x%02x)"
			" chainctime(%d) regdata(%02x%02x%02x%02x) chipaddr(%02x)"
			" regaddr(%02x) crc(%04x)",
			ANTDRV.dname, __func__,
			(int)version, (int)reset, (int)fan_eft, (int)timeout_eft,
			(int)frequency_eft, (int)voltage_eft, (int)chain_check_time_eft,
			(int)chip_config_eft, (int)hw_error_eft, (int)beeper_ctrl,
			(int)temp_over_ctrl, (int)home_mode, (int)chain_num, (int)asic_num,
			(int)fan_pwm_data, (int)timeout_data, (int)frequency,
			(int)voltage[0], (int)voltage[1],
			(int)chain_check_time, (int)reg_data[0], (int)reg_data[1],
			(int)reg_data[2], (int)reg_data[3], (int)chip_address,
			(int)reg_address, (int)crc);
#endif

	return datalen;
}

static int bitmain_set_txtask(struct bitmain_info *info, uint8_t *sendbuf,
			      unsigned int *last_work_block, int *sentcount)
{
	uint16_t crc = 0;
	uint32_t wid = 0;
	int datalen = 0;
	uint8_t new_block = 0;
	//char *ob_hex = NULL;
	struct bitmain_txtask_token *bm = (struct bitmain_txtask_token *)sendbuf;
	int cursentcount = 0;
#ifdef USE_ANT_S2
	uint8_t version = 0;
	int diffbits, lowestdiffbits = -1;
	double workdiff;
#endif
	K_ITEM *witem;

	*sentcount = 0;

	if (unlikely(!bm)) {
		applog(LOG_WARNING, "%s: %s() bm is null", ANTDRV.dname, __func__);
		return -1;
	}
	memset(bm, 0, sizeof(struct bitmain_txtask_token));

	bm->token_type = BITMAIN_TOKEN_TYPE_TXTASK;
#ifdef USE_ANT_S2
	bm->version = version;
	if (info->wbuild->head)
		quithere(1, "%s: %s() wbuild wasn't empty", ANTDRV.dname, __func__);
#endif

	datalen = 10;
	applog(LOG_DEBUG, "%s: send work count %d", ANTDRV.dname, info->work_ready->count);
	while (info->work_ready->count) {
		witem = k_unlink_tail(info->work_ready);
		if (DATAW(witem)->work->work_block > *last_work_block) {
			applog(LOG_ERR, "%s: send task new block %d old(%d)",
					ANTDRV.dname,
					DATAW(witem)->work->work_block, *last_work_block);
			new_block = 1;
			*last_work_block = DATAW(witem)->work->work_block;
		}
		wid = DATAW(witem)->wid;
		bm->works[cursentcount].work_id = htole32(wid);
		applog(LOG_DEBUG, "%s: send task work id:%"PRIu32" %"PRIu32,
				  ANTDRV.dname,
				  wid, bm->works[cursentcount].work_id);
		memcpy(bm->works[cursentcount].midstate, DATAW(witem)->work->midstate, 32);
		memcpy(bm->works[cursentcount].data2, DATAW(witem)->work->data + 64, 12);

		cursentcount++;

#ifdef USE_ANT_S1
		k_add_head(info->work_list, witem);
#else
		k_add_head(info->wbuild, witem);

		diffbits = (int)floor(log2(DATAW(witem)->work->sdiff));
		if (diffbits < 0)
			diffbits = 0;
		// Limit to 4096 so solo mining has reasonable mining stats
		if (diffbits > 12)
			diffbits = 12;

		// Must use diffbits <= all work being sent
		if (lowestdiffbits == -1 || lowestdiffbits > diffbits)
			lowestdiffbits = diffbits;
#endif

	}
	if (cursentcount <= 0) {
		applog(LOG_ERR, "%s: send work count %d", ANTDRV.dname, cursentcount);
		return 0;
	}

#ifdef USE_ANT_S2
	workdiff = pow(2.0, (double)lowestdiffbits);
	witem = info->wbuild->head;
	while (witem) {
		DATAW(witem)->work->device_diff = workdiff;
		witem = witem->next;
	}
	k_list_transfer_to_head(info->wbuild, info->work_list);
#endif

	datalen += 48*cursentcount;

	bm->length = datalen-4;
	bm->length = htole16(bm->length);
	//len = datalen-3;
	//len = htole16(len);
	//memcpy(sendbuf+1, &len, 2);
	bm->new_block = new_block;
#ifdef USE_ANT_S2
	bm->diff = lowestdiffbits;
#endif

	sendbuf[4] = bitswap(sendbuf[4]);

	applog(LOG_DEBUG, "%s: TxTask Token: %d %d %02x%02x%02x%02x%02x%02x",
			  ANTDRV.dname,
			  datalen, bm->length,
			  sendbuf[0], sendbuf[1], sendbuf[2],
			  sendbuf[3], sendbuf[4], sendbuf[5]);

	*sentcount = cursentcount;

	crc = CRC16(sendbuf, datalen-2);
	crc = htole16(crc);
	memcpy(sendbuf+datalen-2, &crc, 2);

#ifdef USE_ANT_S1
	applog(LOG_DEBUG, "%s: TxTask Token: new_block(%d) work_num(%d)"
			  " crc(%04x)",
			  ANTDRV.dname,
			  (int)new_block, cursentcount, (int)crc);
#else
	applog(LOG_DEBUG, "%s: TxTask Token: v(%d) new_block(%d)"
			  " diff(%d work:%f) work_num(%d) crc(%04x)",
			  ANTDRV.dname,
			  (int)version, (int)new_block, lowestdiffbits, workdiff,
			  cursentcount, (int)crc);
#endif
	applog(LOG_DEBUG, "%s: TxTask Token: %d %d %02x%02x%02x%02x%02x%02x",
			  ANTDRV.dname,
			  datalen, bm->length,
			  sendbuf[0], sendbuf[1], sendbuf[2],
			  sendbuf[3], sendbuf[4], sendbuf[5]);

	return datalen;
}

static int bitmain_set_rxstatus(struct bitmain_rxstatus_token *bm,
		uint8_t chip_status_eft, uint8_t detect_get, uint8_t chip_address, uint8_t reg_address)
{
	uint16_t crc = 0;
	int datalen = 0;
	uint8_t *sendbuf = (uint8_t *)bm;
#ifdef USE_ANT_S2
	uint8_t version = 0;
#endif

	if (unlikely(!bm)) {
		applog(LOG_WARNING, "%s: %s() bm is null", ANTDRV.dname, __func__);
		return -1;
	}

	datalen = sizeof(struct bitmain_rxstatus_token);
	memset(bm, 0, datalen);

	bm->token_type = BITMAIN_TOKEN_TYPE_RXSTATUS;
#ifdef USE_ANT_S1
	bm->length = datalen-2;
#else
	bm->version = version;
	bm->length = datalen-4;
	bm->length = htole16(bm->length);
#endif

	bm->chip_status_eft = chip_status_eft;
	bm->detect_get = detect_get;

#ifdef USE_ANT_S1
	sendbuf[2] = bitswap(sendbuf[2]);
#else
	sendbuf[4] = bitswap(sendbuf[4]);
#endif

	bm->chip_address = chip_address;
	bm->reg_address = reg_address;

	crc = CRC16((uint8_t *)bm, datalen-2);
	bm->crc = htole16(crc);

#ifdef USE_ANT_S1
	applog(LOG_DEBUG, "%s: RxStatus Token: chip_status_eft(%d) detect_get(%d)"
			  " chip_address(%02x) reg_address(%02x) crc(%04x)",
			  ANTDRV.dname,
			  (int)chip_status_eft, (int)detect_get, chip_address, reg_address, crc);
#else
	applog(LOG_DEBUG, "%s: RxStatus Token: v(%d) chip_status_eft(%d) detect_get(%d)"
			  " chip_address(%02x) reg_address(%02x) crc(%04x)",
			  ANTDRV.dname,
			  (int)version, (int)chip_status_eft, (int)detect_get,
			  chip_address, reg_address, crc);
#endif

	return datalen;
}

static int bitmain_parse_rxstatus(const uint8_t * data, int datalen, struct bitmain_rxstatus_data *bm)
{
	uint16_t crc = 0;
	int i = 0;
#ifdef USE_ANT_S2
	uint8_t version = 0;
	int j = 0;
	int asic_num = 0;
	int dataindex = 0;
#endif

	if (unlikely(!bm)) {
		applog(LOG_ERR, "%s: %s() bm is null", ANTDRV.dname, __func__);
		return -1;
	}
	if (unlikely(!data || datalen <= 0)) {
		applog(LOG_ERR, "%s: %s() parameter invalid data is null"
				" or datalen(%d) error",
				ANTDRV.dname, __func__, datalen);
		return -1;
	}

#ifdef USE_ANT_S1
	memcpy(bm, data, sizeof(struct bitmain_rxstatus_data));
	if (bm->data_type != BITMAIN_DATA_TYPE_RXSTATUS) {
		applog(LOG_ERR, "%s: %s() datatype(%02x) error",
				ANTDRV.dname, __func__,
				bm->data_type);
		return -1;
	}
	if (bm->length+2 != datalen) {
		applog(LOG_ERR, "%s: %s() length(%d) datalen(%d) error",
				ANTDRV.dname, __func__,
				bm->length, datalen);
		return -1;
	}
	crc = CRC16(data, datalen-2);
	memcpy(&(bm->crc), data+datalen-2, 2);
	bm->crc = htole16(bm->crc);
	if (crc != bm->crc) {
		applog(LOG_ERR, "%s: %s() check crc(%d)"
				" != bm crc(%d) datalen(%d)",
				ANTDRV.dname, __func__,
				crc, bm->crc, datalen);
		return -1;
	}
	bm->fifo_space = htole32(bm->fifo_space);
	bm->nonce_error = htole32(bm->nonce_error);
	if (bm->chain_num*5 + bm->temp_num + bm->fan_num + 22 != datalen) {
		applog(LOG_ERR, "%s: %s() chain_num(%d) temp_num(%d)"
				" fan_num(%d) not match datalen(%d)",
				ANTDRV.dname, __func__,
				bm->chain_num, bm->temp_num, bm->fan_num, datalen);
		return -1;
	}
	if (bm->chain_num > BITMAIN_MAX_CHAIN_NUM) {
		applog(LOG_ERR, "%s: %s() chain_num=%d error",
				ANTDRV.dname, __func__,
				bm->chain_num);
		return -1;
	}
	if (bm->chain_num > 0) {
		memcpy(bm->chain_asic_status, data+20, bm->chain_num*4);
		memcpy(bm->chain_asic_num, data+20+bm->chain_num*4, bm->chain_num);
	}
	for (i = 0; i < bm->chain_num; i++)
		bm->chain_asic_status[i] = htole32(bm->chain_asic_status[i]);
	if (bm->temp_num > 0)
		memcpy(bm->temp, data+20+bm->chain_num*5, bm->temp_num);
	if (bm->fan_num > 0)
		memcpy(bm->fan, data+20+bm->chain_num*5+bm->temp_num, bm->fan_num);
	applog(LOG_DEBUG, "%s: RxStatus Data chipvalueeft(%d) version(%d) fifospace(%d)"
			  " regvalue(%d) chainnum(%d) tempnum(%d) fannum(%d) crc(%04x)",
			  ANTDRV.dname,
			  bm->chip_value_eft, bm->version, bm->fifo_space, bm->reg_value,
			  bm->chain_num, bm->temp_num, bm->fan_num, bm->crc);
	applog(LOG_DEBUG, "%s: RxStatus Data chain info:", ANTDRV.dname);
	for (i = 0; i < bm->chain_num; i++) {
		applog(LOG_DEBUG, "%s: RxStatus Data chain(%d) asic num=%d asic_status=%08x",
				  ANTDRV.dname,
				  i+1, bm->chain_asic_num[i], bm->chain_asic_status[i]);
	}
#else // USE_ANT_S2
	memset(bm, 0, sizeof(struct bitmain_rxstatus_data));
	memcpy(bm, data, 28);
	if (bm->data_type != BITMAIN_DATA_TYPE_RXSTATUS) {
		applog(LOG_ERR, "%s: %s() datatype(%02x) error",
				ANTDRV.dname, __func__,
				bm->data_type);
		return -1;
	}
	if (bm->version != version) {
		applog(LOG_ERR, "%s: %s() version(%02x) error",
				ANTDRV.dname, __func__,
				bm->version);
		return -1;
	}
	bm->length = htole16(bm->length);
	if (bm->length+4 != datalen) {
		applog(LOG_ERR, "%s: %s() length(%d) datalen(%d) error",
				ANTDRV.dname, __func__,
				bm->length, datalen);
		return -1;
	}
	crc = CRC16(data, datalen-2);
	memcpy(&(bm->crc), data+datalen-2, 2);
	bm->crc = htole16(bm->crc);
	if (crc != bm->crc) {
		applog(LOG_ERR, "%s: %s() check crc(%d)"
				" != bm crc(%d) datalen(%d)",
				ANTDRV.dname, __func__,
				crc, bm->crc, datalen);
		return -1;
	}
	bm->fifo_space = htole16(bm->fifo_space);
	bm->fan_exist = htole16(bm->fan_exist);
	bm->temp_exist = htole32(bm->temp_exist);
	bm->nonce_error = htole32(bm->nonce_error);
	if (bm->chain_num > BITMAIN_MAX_CHAIN_NUM) {
		applog(LOG_ERR, "%s: %s() chain_num=%d error",
				ANTDRV.dname, __func__,
				bm->chain_num);
		return -1;
	}
	dataindex = 28;
	if (bm->chain_num > 0) {
		memcpy(bm->chain_asic_num,
			data+datalen-2-bm->chain_num-bm->temp_num-bm->fan_num,
			bm->chain_num);
	}
	for (i = 0; i < bm->chain_num; i++) {
		asic_num = bm->chain_asic_num[i];
		if (asic_num < 0)
			asic_num = 1;
		else {
			if (asic_num % 32 == 0)
				asic_num = asic_num / 32;
			else
				asic_num = asic_num / 32 + 1;
		}
		memcpy((uint8_t *)bm->chain_asic_exist+i*32, data+dataindex, asic_num*4);
		dataindex += asic_num*4;
	}
	for(i = 0; i < bm->chain_num; i++) {
		asic_num = bm->chain_asic_num[i];
		if (asic_num < 0)
			asic_num = 1;
		else {
			if (asic_num % 32 == 0)
				asic_num = asic_num / 32;
			else
				asic_num = asic_num / 32 + 1;
		}
		memcpy((uint8_t *)bm->chain_asic_status+i*32, data+dataindex, asic_num*4);
		dataindex += asic_num*4;
	}
	dataindex += bm->chain_num;
	if ((dataindex + bm->temp_num + bm->fan_num + 2) != datalen) {
		applog(LOG_ERR, "%s: %s() dataindex(%d) chain_num(%d) temp_num(%d)"
				" fan_num(%d) not match datalen(%d)",
				ANTDRV.dname, __func__,
				dataindex, bm->chain_num, bm->temp_num, bm->fan_num, datalen);
		return -1;
	}
	for (i = 0; i < bm->chain_num; i++) {
		for (j = 0; j < 8; j++) {
			bm->chain_asic_exist[i*8+j] = htole32(bm->chain_asic_exist[i*8+j]);
			bm->chain_asic_status[i*8+j] = htole32(bm->chain_asic_status[i*8+j]);
		}
	}
	if (bm->temp_num > 0) {
		memcpy(bm->temp, data+dataindex, bm->temp_num);
		dataindex += bm->temp_num;
	}
	if (bm->fan_num > 0) {
		memcpy(bm->fan, data+dataindex, bm->fan_num);
		dataindex += bm->fan_num;
	}
	applog(LOG_DEBUG, "%s: RxStatus Data chipv_e(%d) chainnum(%d) fifos(%d)"
			  " v1(%d) v2(%d) v3(%d) v4(%d) fann(%d) tempn(%d) fanet(%04x)"
			  " tempet(%08x) ne(%d) regvalue(%d) crc(%04x)",
			  ANTDRV.dname,
			  bm->chip_value_eft, bm->chain_num, bm->fifo_space,
			  bm->hw_version[0], bm->hw_version[1], bm->hw_version[2],
			  bm->hw_version[3], bm->fan_num, bm->temp_num, bm->fan_exist,
			  bm->temp_exist, bm->nonce_error, bm->reg_value, bm->crc);
	applog(LOG_DEBUG, "%s: RxStatus Data chain info:", ANTDRV.dname);
	for (i = 0; i < bm->chain_num; i++) {
		applog(LOG_DEBUG, "%s: RxStatus Data chain(%d) asic num=%d asic_exists=%08x"
				  " asic_status=%08x",
				  ANTDRV.dname,
				  i+1, bm->chain_asic_num[i], bm->chain_asic_exist[i*8],
				  bm->chain_asic_status[i*8]);
	}
#endif

	applog(LOG_DEBUG, "%s: RxStatus Data temp info:", ANTDRV.dname);
	for (i = 0; i < bm->temp_num; i++) {
		applog(LOG_DEBUG, "%s: RxStatus Data temp(%d) temp=%d",
				  ANTDRV.dname,
				  i+1, bm->temp[i]);
	}
	applog(LOG_DEBUG, "%s: RxStatus Data fan info:", ANTDRV.dname);
	for (i = 0; i < bm->fan_num; i++) {
		applog(LOG_DEBUG, "%s: RxStatus Data fan(%d) fan=%d",
				  ANTDRV.dname,
				  i+1, bm->fan[i]);
	}
	return 0;
}

static int bitmain_parse_rxnonce(const uint8_t * data, int datalen, struct bitmain_rxnonce_data *bm, int * nonce_num)
{
	int i = 0;
	uint16_t crc = 0;
#ifdef USE_ANT_S2
	uint8_t version = 0;
#endif
	int curnoncenum = 0;
	if (unlikely(!bm)) {
		applog(LOG_ERR, "%s: %s() bm is null", ANTDRV.dname, __func__);
		return -1;
	}
	if (unlikely(!data || datalen <= 0)) {
		applog(LOG_ERR, "%s: %s() parameter invalid data is null"
				" or datalen(%d) error",
				ANTDRV.dname, __func__, datalen);
		return -1;
	}
	memcpy(bm, data, sizeof(struct bitmain_rxnonce_data));

	if (bm->data_type != BITMAIN_DATA_TYPE_RXNONCE) {
		applog(LOG_ERR, "%s: %s() datatype(%02x) error",
				ANTDRV.dname, __func__,
				bm->data_type);
		return -1;
	}
#ifdef USE_ANT_S1
	if (bm->length+2 != datalen) {
		applog(LOG_ERR, "%s: %s() length(%d) error",
				ANTDRV.dname, __func__,
				bm->length);
		return -1;
	}
#else
	if (bm->version != version) {
		applog(LOG_ERR, "%s: %s() version(%02x) error",
				ANTDRV.dname, __func__,
				bm->version);
		return -1;
	}
	bm->length = htole16(bm->length);
	if (bm->length+4 != datalen) {
		applog(LOG_ERR, "%s: %s() length(%d) datalen(%d) error",
				ANTDRV.dname, __func__,
				bm->length, datalen);
		return -1;
	}
#endif
	crc = CRC16(data, datalen-2);
	memcpy(&(bm->crc), data+datalen-2, 2);
	bm->crc = htole16(bm->crc);
	if (crc != bm->crc) {
		applog(LOG_ERR, "%s: %s() check crc(%d)"
				" != bm crc(%d) datalen(%d)",
				ANTDRV.dname, __func__,
				crc, bm->crc, datalen);
		return -1;
	}
#ifdef USE_ANT_S1
	curnoncenum = (datalen-4)/8;
#else
	bm->fifo_space = htole16(bm->fifo_space);
	bm->diff = htole16(bm->diff);
	bm->total_nonce_num = htole64(bm->total_nonce_num);
	curnoncenum = (datalen-14)/8;
#endif
	applog(LOG_DEBUG, "%s: RxNonce Data: nonce_num(%d) fifo_space(%d)",
			  ANTDRV.dname, curnoncenum, bm->fifo_space);
	for (i = 0; i < curnoncenum; i++) {
		bm->nonces[i].work_id = htole32(bm->nonces[i].work_id);
		bm->nonces[i].nonce = htole32(bm->nonces[i].nonce);
		applog(LOG_DEBUG, "%s: RxNonce Data %d: work_id(%"PRIu32") nonce(%08x)(%d)",
				  ANTDRV.dname,
				  i, bm->nonces[i].work_id,
				  bm->nonces[i].nonce, bm->nonces[i].nonce);
	}
	*nonce_num = curnoncenum;
	return 0;
}

static int bitmain_read(struct cgpu_info *bitmain, unsigned char *buf,
			size_t bufsize, __maybe_unused int timeout,
			__maybe_unused int ep)
{
	__maybe_unused struct bitmain_info *info = bitmain->device_data;
	int readlen = 0;

	if (bitmain == NULL || buf == NULL || bufsize <= 0) {
		applog(LOG_WARNING, "%s%d: %s() parameter error bufsize(%d)",
				    bitmain->drv->name, bitmain->device_id,
				    __func__, (int)bufsize);
		return -1;
	}

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
	int err = usb_read_once_timeout(bitmain, (char *)buf, bufsize, &readlen,
					timeout, ep);
	applog(LOG_DEBUG, "%s%i: Get %s() got readlen %d err %d",
			  bitmain->drv->name, bitmain->device_id,
			  __func__, readlen, err);
#else
	readlen = read(info->device_fd, buf, bufsize);
#endif
	return readlen;
}

static int bitmain_write(struct cgpu_info *bitmain, char *buf, ssize_t len,
			 __maybe_unused int ep)
{
	__maybe_unused struct bitmain_info *info = bitmain->device_data;
	int amount, __maybe_unused sent;

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
	int err = usb_write(bitmain, buf, len, &amount, ep);
	applog(LOG_DEBUG, "%s%d: usb_write got err %d",
			  bitmain->drv->name, bitmain->device_id, err);

	if (unlikely(err != 0)) {
		applog(LOG_ERR, "%s%d: usb_write error on %s() err=%d",
				bitmain->drv->name, bitmain->device_id, __func__, err);
		return BTM_SEND_ERROR;
	}
	if (amount != len) {
		applog(LOG_ERR, "%s%d: usb_write length mismatch on %s() "
				"amount=%d len=%d",
				bitmain->drv->name, bitmain->device_id, __func__,
				amount, (int)len);
		return BTM_SEND_ERROR;
	}
#else
	sent = 0;

	while (sent < len) {
		amount = write(info->device_fd, buf+sent, len-sent);
		if (amount < 0) {
			applog(LOG_WARNING, "%s%d: ser_write got err %d",
					    bitmain->drv->name, bitmain->device_id, amount);
			return BTM_SEND_ERROR;
		}
		sent += amount;
	}
#endif
	return BTM_SEND_OK;
}

static int bitmain_send_data(const uint8_t *data, int datalen, __maybe_unused struct cgpu_info *bitmain)
{
	int ret, ep = 0;
	//int delay;
	//struct bitmain_info *info = NULL;
	//cgtimer_t ts_start;

	if (datalen <= 0) {
		return 0;
	}

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
	ep = C_BITMAIN_SEND;
	if (data[0] == BITMAIN_TOKEN_TYPE_TXCONFIG) {
		ep = C_BITMAIN_TOKEN_TXCONFIG;
	} else if (data[0] == BITMAIN_TOKEN_TYPE_TXTASK) {
		ep = C_BITMAIN_TOKEN_TXTASK;
	} else if (data[0] == BITMAIN_TOKEN_TYPE_RXSTATUS) {
		ep = C_BITMAIN_TOKEN_RXSTATUS;
	}
#endif

	//info = bitmain->device_data;
	//delay = datalen * 10 * 1000000;
	//delay = delay / info->baud;
	//delay += 4000;

	if (opt_debug) {
		applog(LOG_DEBUG, "%s: Sent(%d):", ANTDRV.dname, datalen);
		hexdump(data, datalen);
	}

	//cgsleep_prepare_r(&ts_start);
	applog(LOG_DEBUG, "%s: %s() start", ANTDRV.dname, __func__);
	ret = bitmain_write(bitmain, (char *)data, datalen, ep);
	applog(LOG_DEBUG, "%s: %s() stop ret=%d datalen=%d",
			  ANTDRV.dname, __func__, ret, datalen);
	//cgsleep_us_r(&ts_start, delay);

	//applog(LOG_DEBUG, "BitMain: Sent: Buffer delay: %dus", delay);

	return ret;
}

static void bitmain_inc_nvw(struct bitmain_info *info, struct thr_info *thr)
{
	applog(LOG_INFO, "%s%d: No matching work - HW error",
			 thr->cgpu->drv->name, thr->cgpu->device_id);

	inc_hw_errors(thr);
	info->no_matching_work++;
}

static inline void record_temp_fan(struct bitmain_info *info, struct bitmain_rxstatus_data *bm, double *temp_avg)
{
	int i = 0;

	*temp_avg = 0.0;

	info->fan_num = bm->fan_num;
	for (i = 0; i < bm->fan_num; i++)
		info->fan[i] = bm->fan[i] * BITMAIN_FAN_FACTOR;
	info->temp_num = bm->temp_num;
	info->temp_hi = 0;
	for (i = 0; i < bm->temp_num; i++) {
		info->temp[i] = bm->temp[i];
		/* if (bm->temp[i] & 0x80) {
			bm->temp[i] &= 0x7f;
			info->temp[i] = 0 - ((~bm->temp[i] & 0x7f) + 1);
		}*/
		*temp_avg += info->temp[i];

		if (info->temp[i] > info->temp_max)
			info->temp_max = info->temp[i];
		if (info->temp[i] > info->temp_hi)
			info->temp_hi = info->temp[i];
	}

	if (bm->temp_num > 0) {
		*temp_avg = *temp_avg / bm->temp_num;
		info->temp_avg = *temp_avg;
	}
}

static void bitmain_update_temps(struct cgpu_info *bitmain, struct bitmain_info *info,
				struct bitmain_rxstatus_data *bm)
{
	char tmp[64] = {0};
	char msg[10240] = {0};
	int i = 0;
	record_temp_fan(info, bm, &(bitmain->temp));

	sprintf(msg, "%s%d: ", bitmain->drv->name, bitmain->device_id);
	for (i = 0; i < bm->fan_num; i++) {
		if (i != 0) {
			strcat(msg, ", ");
		}
		sprintf(tmp, "Fan%d: %d/m", i+1, info->fan[i]);
		strcat(msg, tmp);
	}
	strcat(msg, "  ");
	for (i = 0; i < bm->temp_num; i++) {
		if (i != 0) {
			strcat(msg, ", ");
		}
		sprintf(tmp, "Temp%d: %dC", i+1, info->temp[i]);
		strcat(msg, tmp);
	}
	sprintf(tmp, ", TempMAX: %dC", info->temp_max);
	strcat(msg, tmp);
	applog(LOG_INFO, "%s", msg);
	info->temp_history_index++;
	info->temp_sum += bitmain->temp;
	applog(LOG_DEBUG, "%s%d: temp_index: %d, temp_count: %d, temp_max: %d",
			  bitmain->drv->name, bitmain->device_id,
			  info->temp_history_index, info->temp_history_count, info->temp_max);
	if (info->temp_history_index == info->temp_history_count) {
		info->temp_history_index = 0;
		info->temp_sum = 0;
	}
#ifdef USE_ANT_S1
	if (unlikely(info->temp_hi >= opt_bitmain_overheat)) {
		if (!info->overheat) {
			applog(LOG_WARNING, "%s%d: overheat! hi %dC limit %dC idling",
					    bitmain->drv->name, bitmain->device_id,
					    info->temp_hi, opt_bitmain_overheat);
			info->overheat = true;
			info->overheat_temp = info->temp_hi;
			info->overheat_count++;
			info->overheat_slept = 0;
		}
	} else if (info->overheat && info->temp_hi <= opt_bitmain_temp) {
		applog(LOG_WARNING, "%s%d: cooled, restarting",
				    bitmain->drv->name, bitmain->device_id);
		info->overheat = false;
		info->overheat_recovers++;
	}
#endif
}

static void bitmain_parse_results(struct cgpu_info *bitmain, struct bitmain_info *info,
				  struct thr_info *thr, uint8_t *buf, int *offset)
{
#ifdef USE_ANT_S1
	int i, j, n, m, errordiff, spare = BITMAIN_READ_SIZE;
	uint32_t checkbit = 0x00000000;
	bool found = false;
	struct work *work = NULL;
	//char *ob_hex = NULL;
	uint64_t searches;
	K_ITEM *witem;

	for (i = 0; i <= spare; i++) {
		if (buf[i] == 0xa1) {
			struct bitmain_rxstatus_data rxstatusdata;
			applog(LOG_DEBUG, "%s%d: %s() RxStatus Data",
					  bitmain->drv->name, bitmain->device_id,
					  __func__);
			if (*offset < 2) {
				return;
			}
			if (buf[i+1] > 124) {
				applog(LOG_ERR, "%s%d: %s() RxStatus Data datalen=%d error",
						bitmain->drv->name, bitmain->device_id,
						__func__, buf[i+1]+2);
				continue;
			}
			if (*offset < buf[i+1] + 2) {
				return;
			}
			if (bitmain_parse_rxstatus(buf+i, buf[i+1]+2, &rxstatusdata) != 0) {
				applog(LOG_ERR, "%s%d: %s() RxStatus Data error len=%d",
						bitmain->drv->name, bitmain->device_id,
						__func__, buf[i+1]+2);
			} else {
				mutex_lock(&info->qlock);
				info->chain_num = rxstatusdata.chain_num;
				info->fifo_space = rxstatusdata.fifo_space;
				info->nonce_error = rxstatusdata.nonce_error;
				errordiff = info->nonce_error-info->last_nonce_error;
				applog(LOG_DEBUG, "%s%d: %s() RxStatus Data"
						" version=%d chainnum=%d fifospace=%d"
						" nonceerror=%d-%d freq=%d chain info:",
						bitmain->drv->name, bitmain->device_id, __func__,
						rxstatusdata.version, info->chain_num,
						info->fifo_space, info->last_nonce_error,
						info->nonce_error, info->frequency);
				for (n = 0; n < rxstatusdata.chain_num; n++) {
					info->chain_asic_num[n] = rxstatusdata.chain_asic_num[n];
					info->chain_asic_status[n] = rxstatusdata.chain_asic_status[n];
					memset(info->chain_asic_status_t[n], 0, 40);
					j = 0;
					for (m = 0; m < 32; m++) {
						if (m%8 == 0 && m != 0) {
							info->chain_asic_status_t[n][j] = ' ';
							j++;
						}
						checkbit = num2bit(m);
						if (rxstatusdata.chain_asic_status[n] & checkbit)
							info->chain_asic_status_t[n][j] = 'o';
						else
							info->chain_asic_status_t[n][j] = 'x';

						j++;
					}
					applog(LOG_DEBUG, "%s%d: %s() RxStatus Data chain(%d)"
							" asic_num=%d asic_status=%08x-%s",
							bitmain->drv->name, bitmain->device_id,
							__func__,
							n, info->chain_asic_num[n],
							info->chain_asic_status[n],
							info->chain_asic_status_t[n]);
				}
				mutex_unlock(&info->qlock);

				if (errordiff > 0) {
					for (j = 0; j < errordiff; j++) {
						bitmain_inc_nvw(info, thr);
					}
					mutex_lock(&info->qlock);
					info->last_nonce_error += errordiff;
					mutex_unlock(&info->qlock);
				}
				bitmain_update_temps(bitmain, info, &rxstatusdata);
			}

			found = true;
			spare = buf[i+1] + 2 + i;
			if (spare > *offset) {
				applog(LOG_ERR, "%s%d: %s() spare(%d) > offset(%d)",
						bitmain->drv->name, bitmain->device_id,
						__func__, spare, *offset);
				spare = *offset;
			}
			break;
		} else if (buf[i] == 0xa2) {
			struct bitmain_rxnonce_data rxnoncedata;
			int nonce_num = 0;
			applog(LOG_DEBUG, "%s%d: %s() RxNonce Data",
					  bitmain->drv->name, bitmain->device_id,
					  __func__);
			if (*offset < 2) {
				return;
			}
			if (buf[i+1] > 70) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data datalen=%d error",
						bitmain->drv->name, bitmain->device_id,
						__func__, buf[i+1]+2);
				continue;
			}
			if (*offset < buf[i+1] + 2) {
				return;
			}
			if (bitmain_parse_rxnonce(buf+i, buf[i+1]+2, &rxnoncedata, &nonce_num) != 0) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data error len=%d",
						bitmain->drv->name, bitmain->device_id,
						__func__, buf[i+1]+2);
			} else {
				for (j = 0; j < nonce_num; j++) {
					uint32_t wid = rxnoncedata.nonces[j].work_id;
					searches = 0;
					mutex_lock(&info->qlock);
					witem = info->work_list->head;
					while (witem) {
						searches++;
						if (DATAW(witem)->wid == wid)
							break;
						witem = witem->next;
					}
					mutex_unlock(&info->qlock);
					if (witem) {
						if (info->work_search == 0) {
							info->min_search = searches;
							info->max_search = searches;
						} else {
							if (info->min_search > searches)
								info->min_search = searches;
							if (info->max_search < searches)
								info->max_search = searches;
						}
						info->work_search++;
						info->tot_search += searches;

						work = DATAW(witem)->work;
						applog(LOG_DEBUG, "%s%d: %s() RxNonce Data find "
								  "work(%"PRIu32")(%08x)",
								  bitmain->drv->name,
								  bitmain->device_id,
								  __func__, wid,
								  rxnoncedata.nonces[j].nonce);

						applog(LOG_DEBUG, "%s%d: %s() nonce = %08x",
								  bitmain->drv->name, bitmain->device_id,
								  __func__, rxnoncedata.nonces[j].nonce);
						if (isdupnonce(bitmain, work, rxnoncedata.nonces[j].nonce)) {
							// ignore it
						} else {
							if (submit_nonce(thr, work, rxnoncedata.nonces[j].nonce)) {
								applog(LOG_DEBUG, "%s%d: %s() RxNonce Data ok",
										  bitmain->drv->name,
										  bitmain->device_id,
										  __func__);
								mutex_lock(&info->qlock);
								info->nonces++;
								mutex_unlock(&info->qlock);
							} else {
								applog(LOG_ERR, "%s%d: %s() RxNonce Data "
										"error work(%"PRIu32")",
										bitmain->drv->name,
										bitmain->device_id,
										__func__,
										rxnoncedata.nonces[j].work_id);
							}
						}
					} else {
						if (info->failed_search == 0) {
							info->min_failed = searches;
							info->max_failed = searches;
						} else {
							if (info->min_failed > searches)
								info->min_failed = searches;
							if (info->max_failed < searches)
								info->max_failed = searches;
						}
						info->failed_search++;
						info->tot_failed += searches;

						mutex_lock(&info->qlock);
						uint32_t min = 0, max = 0;
						int count = 0;
						if (info->work_list->tail) {
							min = DATAW(info->work_list->tail)->wid;
							max = DATAW(info->work_list->head)->wid;
							count = info->work_list->count;
						}
						mutex_unlock(&info->qlock);
						applog(LOG_ERR, "%s%d: %s() Work not found"
								" for id (%"PRIu32") (min=%"
								PRIu32" max=%"PRIu32" count=%d)",
								bitmain->drv->name,
								bitmain->device_id,
								__func__, wid,
								min, max, count);
					}
				}
				mutex_lock(&info->qlock);
				info->fifo_space = rxnoncedata.fifo_space;
				mutex_unlock(&info->qlock);
				applog(LOG_DEBUG, "%s%d: %s() RxNonce Data fifo space=%d",
						  bitmain->drv->name, bitmain->device_id,
						  __func__, rxnoncedata.fifo_space);
			}

			found = true;
			spare = buf[i+1] + 2 + i;
			if (spare > *offset) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data space(%d) > offset(%d)",
						bitmain->drv->name, bitmain->device_id, __func__, 
						spare, *offset);
				spare = *offset;
			}
			break;
		} else {
			applog(LOG_ERR, "%s%d: %s() data type error=%02x",
					bitmain->drv->name, bitmain->device_id,
					__func__, buf[i]);
		}
	}
	if (!found) {
		spare = *offset - BITMAIN_READ_SIZE;
		/* We are buffering and haven't accumulated one more corrupt
		 * work result. */
		if (spare < (int)BITMAIN_READ_SIZE)
			return;
		bitmain_inc_nvw(info, thr);
	}

	*offset -= spare;
	memmove(buf, buf + spare, *offset);
#else // S2
	int i, j, n, m, r, errordiff, spare = BITMAIN_READ_SIZE;
	uint32_t checkbit = 0x00000000;
	bool found = false;
	struct work *work = NULL;
	struct bitmain_packet_head packethead;
	int asicnum = 0, mod = 0, tmp = 0;
	uint64_t searches;
	K_ITEM *witem;

	for (i = 0; i <= spare; i++) {
		if (buf[i] == 0xa1) {
			struct bitmain_rxstatus_data rxstatusdata;
			applog(LOG_DEBUG, "%s%d: %s() RxStatus Data",
					  bitmain->drv->name, bitmain->device_id,
					  __func__);
			if (*offset < 4) {
				return;
			}
			memcpy(&packethead, buf+i, sizeof(struct bitmain_packet_head));
			packethead.length = htole16(packethead.length);
			if (packethead.length > 1130) {
				applog(LOG_ERR, "%s%d: %s() RxStatus Data datalen=%d error",
						bitmain->drv->name, bitmain->device_id,
						__func__, packethead.length+4);
				continue;
			}
			if (*offset < packethead.length + 4)
				return;
			if (bitmain_parse_rxstatus(buf+i, packethead.length+4, &rxstatusdata) != 0) {
				applog(LOG_ERR, "%s%d: %s() RxStatus Data error len=%d",
						bitmain->drv->name, bitmain->device_id,
						__func__, packethead.length+4);
			} else {
				mutex_lock(&info->qlock);
				info->chain_num = rxstatusdata.chain_num;
				info->fifo_space = rxstatusdata.fifo_space;
				info->hw_version[0] = rxstatusdata.hw_version[0];
				info->hw_version[1] = rxstatusdata.hw_version[1];
				info->hw_version[2] = rxstatusdata.hw_version[2];
				info->hw_version[3] = rxstatusdata.hw_version[3];
				info->nonce_error = rxstatusdata.nonce_error;
				errordiff = info->nonce_error-info->last_nonce_error;
				applog(LOG_DEBUG, "%s%d: %s() RxStatus Data"
						" version=%d chainnum=%d fifospace=%d"
						" hwv1=%d hwv2=%d hwv3=%d hwv4=%d"
						" nonceerror=%d-%d freq=%d chain info:",
						bitmain->drv->name, bitmain->device_id, __func__,
						rxstatusdata.version, info->chain_num, info->fifo_space,
						info->hw_version[0], info->hw_version[1],
						info->hw_version[2], info->hw_version[3],
						info->last_nonce_error,
						info->nonce_error, info->frequency);
				memcpy(info->chain_asic_exist, rxstatusdata.chain_asic_exist, BITMAIN_MAX_CHAIN_NUM*32);
				memcpy(info->chain_asic_status, rxstatusdata.chain_asic_status, BITMAIN_MAX_CHAIN_NUM*32);
				for (n = 0; n < rxstatusdata.chain_num; n++) {
					info->chain_asic_num[n] = rxstatusdata.chain_asic_num[n];
					memset(info->chain_asic_status_t[n], 0, 320);
					j = 0;
					mod = 0;
					if (info->chain_asic_num[n] <= 0)
						asicnum = 0;
					else {
						mod = info->chain_asic_num[n] % 32;
						if (mod == 0)
							asicnum = info->chain_asic_num[n] / 32;
						else
							asicnum = info->chain_asic_num[n] / 32 + 1;
					}
					if (asicnum > 0) {
						for (m = asicnum-1; m >= 0; m--) {
							tmp = (mod ? (32 - mod) : 0);
							for (r = tmp; r < 32; r++) {
								if (((r-tmp) % 8) == 0 && (r-tmp) != 0) {
									info->chain_asic_status_t[n][j] = ' ';
									j++;
								}
								checkbit = num2bit(r);
								if (rxstatusdata.chain_asic_exist[n*8+m] & checkbit) {
									if (rxstatusdata.chain_asic_status[n*8+m] & checkbit)
										info->chain_asic_status_t[n][j] = 'o';
									else
										info->chain_asic_status_t[n][j] = 'x';
								} else
									info->chain_asic_status_t[n][j] = '-';
								j++;
							}
							info->chain_asic_status_t[n][j] = ' ';
							j++;
							mod = 0;
						}
					}
					applog(LOG_DEBUG, "%s%d: %s() RxStatis Data chain(%d) asic_num=%d "
							  "asic_exist=%08x%08x%08x%08x%08x%08x%08x%08x "
							  "asic_status=%08x%08x%08x%08x%08x%08x%08x%08x",
							  bitmain->drv->name, bitmain->device_id,
							  __func__, n, info->chain_asic_num[n],
							  info->chain_asic_exist[n*8+0],
							  info->chain_asic_exist[n*8+1],
							  info->chain_asic_exist[n*8+2],
							  info->chain_asic_exist[n*8+3],
							  info->chain_asic_exist[n*8+4],
							  info->chain_asic_exist[n*8+5],
							  info->chain_asic_exist[n*8+6],
							  info->chain_asic_exist[n*8+7],
							  info->chain_asic_status[n*8+0],
							  info->chain_asic_status[n*8+1],
							  info->chain_asic_status[n*8+2],
							  info->chain_asic_status[n*8+3],
							  info->chain_asic_status[n*8+4],
							  info->chain_asic_status[n*8+5],
							  info->chain_asic_status[n*8+6],
							  info->chain_asic_status[n*8+7]);
					applog(LOG_ERR, "%s%d: %s() RxStatis Data chain(%d) asic_num=%d"
							" asic_status=%s",
							bitmain->drv->name, bitmain->device_id,
							__func__, n, info->chain_asic_num[n],
							info->chain_asic_status_t[n]);
				}
				mutex_unlock(&info->qlock);

				if (errordiff > 0) {
					for (j = 0; j < errordiff; j++)
						bitmain_inc_nvw(info, thr);
					mutex_lock(&info->qlock);
					info->last_nonce_error += errordiff;
					mutex_unlock(&info->qlock);
				}
				bitmain_update_temps(bitmain, info, &rxstatusdata);
			}

			found = true;
			spare = packethead.length + 4 + i;
			if (spare > *offset) {
				applog(LOG_ERR, "%s%d: %s() spare(%d) > offset(%d)",
						bitmain->drv->name, bitmain->device_id,
						__func__, spare, *offset);
				spare = *offset;
			}
			break;
		} else if (buf[i] == 0xa2) {
			struct bitmain_rxnonce_data rxnoncedata;
			int nonce_num = 0;
			applog(LOG_DEBUG, "%s%d: %s() RxNonce Data",
					  bitmain->drv->name, bitmain->device_id,
					  __func__);
			if (*offset < 4)
				return;
			memcpy(&packethead, buf+i, sizeof(struct bitmain_packet_head));
			packethead.length = htole16(packethead.length);
			if (packethead.length > 1030) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data datalen=%d error",
						bitmain->drv->name, bitmain->device_id,
						__func__, packethead.length+4);
				continue;
			}
			if (*offset < packethead.length + 4)
				return;
			if (bitmain_parse_rxnonce(buf+i, packethead.length+4, &rxnoncedata, &nonce_num) != 0) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data error len=%d",
						bitmain->drv->name, bitmain->device_id,
						__func__, packethead.length+4);
			} else {
				for (j = 0; j < nonce_num; j++) {
					uint32_t wid = rxnoncedata.nonces[j].work_id;
					searches = 0;
					mutex_lock(&info->qlock);
					witem = info->work_list->head;
					while (witem && DATAW(witem)->work) {
						searches++;
						if (DATAW(witem)->wid == wid)
							break;
						witem = witem->next;
					}
					if (witem && DATAW(witem)->work) {
						work = DATAW(witem)->work;
						mutex_unlock(&info->qlock);
						if (info->work_search == 0) {
							info->min_search = searches;
							info->max_search = searches;
						} else {
							if (info->min_search > searches)
								info->min_search = searches;
							if (info->max_search < searches)
								info->max_search = searches;
						}
						info->work_search++;
						info->tot_search += searches;

						applog(LOG_DEBUG, "%s%d: %s() RxNonce Data find "
								  "work(%"PRIu32")(%08x)",
								  bitmain->drv->name, bitmain->device_id,
								  __func__, wid,
								  rxnoncedata.nonces[j].nonce);

						applog(LOG_DEBUG, "%s%d: %s() nonce = %08x",
								  bitmain->drv->name, bitmain->device_id,
								  __func__, rxnoncedata.nonces[j].nonce);
						if (isdupnonce(bitmain, work, rxnoncedata.nonces[j].nonce)) {
							// ignore it
						} else {
							if (submit_nonce(thr, work, rxnoncedata.nonces[j].nonce)) {
								applog(LOG_DEBUG, "%s%d: %s() RxNonce Data ok",
										  bitmain->drv->name,
										  bitmain->device_id,
										  __func__);
								mutex_lock(&info->qlock);
								info->nonces += work->device_diff;
								mutex_unlock(&info->qlock);
							} else {
								applog(LOG_ERR, "%s%d: %s() RxNonce Data "
										"error work(%"PRIu32")",
										bitmain->drv->name,
										bitmain->device_id,
										__func__,
										rxnoncedata.nonces[j].work_id);
							}
						}
					} else {
						mutex_unlock(&info->qlock);
						if (info->failed_search == 0) {
							info->min_failed = searches;
							info->max_failed = searches;
						} else {
							if (info->min_failed > searches)
								info->min_failed = searches;
							if (info->max_failed < searches)
								info->max_failed = searches;
						}
						info->failed_search++;
						info->tot_failed += searches;

						applog(LOG_ERR, "%s%d: %s() Work not found "
								"for id (%"PRIu32")",
								bitmain->drv->name,
								bitmain->device_id,
								__func__, wid);
					}
				}
				mutex_lock(&info->qlock);
				info->fifo_space = rxnoncedata.fifo_space;
				mutex_unlock(&info->qlock);
				applog(LOG_DEBUG, "%s%d: %s() RxNonce Data fifo space=%d",
						  bitmain->drv->name, bitmain->device_id,
						  __func__, rxnoncedata.fifo_space);

				if (nonce_num < BITMAIN_MAX_NONCE_NUM)
					cgsleep_ms(5);
			}

			found = true;
			spare = packethead.length + 4 + i;
			if (spare > *offset) {
				applog(LOG_ERR, "%s%d: %s() RxNonce Data space(%d) > offset(%d)",
						bitmain->drv->name, bitmain->device_id, __func__,
						spare, *offset);
				spare = *offset;
			}
			break;
		} else {
			applog(LOG_ERR, "%s%d: %s() data type error=%02x",
					bitmain->drv->name, bitmain->device_id,
					__func__, buf[i]);
		}
	}
	if (!found) {
		spare = *offset - BITMAIN_READ_SIZE;
		/* We are buffering and haven't accumulated one more corrupt
		 * work result. */
		if (spare < (int)BITMAIN_READ_SIZE)
			return;
		bitmain_inc_nvw(info, thr);
	}

	*offset -= spare;
	memmove(buf, buf + spare, *offset);
#endif
}

static void bitmain_running_reset(struct bitmain_info *info)
{
	info->results = 0;
	info->reset = false;
}

static void *bitmain_get_results(void *userdata)
{
	struct cgpu_info *bitmain = (struct cgpu_info *)userdata;
	struct bitmain_info *info = bitmain->device_data;
	int offset = 0, ret = 0;
	const int rsize = BITMAIN_FTDI_READSIZE;
	char readbuf[BITMAIN_READBUF_SIZE];
	struct thr_info *thr = info->thr;
	char threadname[24];
	int errorcount = 0;
	struct timeval stt;
	int64_t delta;

	snprintf(threadname, 24, "btm_recv/%d", bitmain->device_id);
	RenameThread(threadname);

	delta = 0;
	PROFILE_START(stt);
	while (likely(!bitmain->shutdown)) {
		unsigned char buf[rsize];

		applog(LOG_DEBUG, "%s%d: %s() offset=%d",
				  bitmain->drv->name, bitmain->device_id, __func__, offset);

		if (offset >= (int)BITMAIN_READ_SIZE) {
			info->get_results++;
			applog(LOG_DEBUG, "%s%d: %s() start",
					  bitmain->drv->name, bitmain->device_id, __func__);
			PROFILE_FINISH2(stt, info->get_usec_count,
					info->get_usec,
					info->get_usec2,
					info->get_usec_ranges,
					info->get_usec2_ranges,
					delta);
			bitmain_parse_results(bitmain, info, thr, (uint8_t *)readbuf, &offset);
			delta = 0;
			PROFILE_START(stt);
			applog(LOG_DEBUG, "%s%d: %s() stop",
					  bitmain->drv->name, bitmain->device_id, __func__);
		}

		if (unlikely(offset + rsize >= BITMAIN_READBUF_SIZE)) {
			info->readbuf_over++;
			/* This should never happen */
			applog(LOG_DEBUG, "%s%d: readbuf overflow, resetting buffer",
					  bitmain->drv->name, bitmain->device_id);
			offset = 0;
		}

		if (unlikely(info->reset)) {
			bitmain_running_reset(info);
			/* Discard anything in the buffer */
			offset = 0;
		}

#ifdef USE_ANT_S1
		// 2ms shouldn't be too much
		info->get_sleepsa++;
		cgsleep_ms(2);
		delta += 2000;
#endif

		applog(LOG_DEBUG, "%s%d: %s() read",
				  bitmain->drv->name, bitmain->device_id, __func__);
		ret = bitmain_read(bitmain, buf, rsize, BITMAIN_READ_TIMEOUT, C_BITMAIN_READ);
		applog(LOG_DEBUG, "%s%d: %s() read=%d",
				  bitmain->drv->name, bitmain->device_id, __func__, ret);

		if (ret < 1) {
			errorcount++;
			info->read_bad++;
#ifdef USE_ANT_S1
			if (errorcount > 100) {
#else
			if (errorcount > 3) {
#endif
//				applog(LOG_ERR, "%s%d: read errorcount>100 ret=%d",
//						bitmain->drv->name, bitmain->device_id, ret);
				info->get_sleepsb++;
				cgsleep_ms(20);
				delta += 20000;
				errorcount = 0;
			}
#ifndef USE_ANT_S1
			if (errorcount > 0) {
				info->get_sleepsc++;
				cgsleep_ms(1);
				delta += 1000;
			}
#endif
			continue;
		}

		if (opt_debug) {
			applog(LOG_DEBUG, "%s%d: get:",
					  bitmain->drv->name, bitmain->device_id);
			hexdump((uint8_t *)buf, ret);
		}

		info->read_size += ret;
		if (info->read_good == 0)
			info->read_sizemin = info->read_sizemax = ret;
		else {
			if (info->read_sizemin > ret)
				info->read_sizemin = ret;
			if (info->read_sizemax < ret)
				info->read_sizemax = ret;
		}
		info->read_good++;
		if (ret == 0)
			info->read_0s++;
		if (ret == 18)
			info->read_18s++;
		memcpy(readbuf+offset, buf, ret);
		offset += ret;
	}
	return NULL;
}

/*
static void bitmain_set_timeout(struct bitmain_info *info)
{
	info->timeout = BITMAIN_TIMEOUT_FACTOR / info->frequency;
}
*/

static void bitmain_init(struct cgpu_info *bitmain)
{
	applog(LOG_INFO, "%s%d: opened on %s",
			 bitmain->drv->name, bitmain->device_id,
			 bitmain->device_path);
}

static bool bitmain_prepare(struct thr_info *thr)
{
	struct cgpu_info *bitmain = thr->cgpu;
	struct bitmain_info *info = bitmain->device_data;

	info->thr = thr;
	mutex_init(&info->lock);
	mutex_init(&info->qlock);
	if (unlikely(pthread_cond_init(&info->qcond, NULL)))
		quit(1, "Failed to pthread_cond_init bitmain qcond");
	cgsem_init(&info->write_sem);

	if (pthread_create(&info->read_thr, NULL, bitmain_get_results, (void *)bitmain))
		quit(1, "Failed to create bitmain read_thr");

	bitmain_init(bitmain);

	return true;
}

static int bitmain_initialize(struct cgpu_info *bitmain)
{
	uint8_t data[BITMAIN_READBUF_SIZE];
	struct bitmain_info *info = NULL;
	int ret = 0;
	uint8_t sendbuf[BITMAIN_SENDBUF_SIZE];
	int readlen = 0;
	int sendlen = 0;
	int trycount = 3;
	struct timespec p;
	struct bitmain_rxstatus_data rxstatusdata;
	int i = 0, j = 0, m = 0, statusok = 0;
	uint32_t checkbit = 0x00000000;
	int hwerror_eft = 0;
	int beeper_ctrl = 1;
	int tempover_ctrl = 1;
	int home_mode = 0;
#ifndef USE_ANT_S1
	int r = 0;
	struct bitmain_packet_head packethead;
	int asicnum = 0;

	int mathtest = (int)floor(log2(42));
	if (mathtest != 5) {
		applog(LOG_ERR, "%s%d: %s() floating point math library is deficient",
				bitmain->drv->name, bitmain->device_id, __func__);
		return -1;
	}
#endif

	/* Send reset, then check for result */
	if (!bitmain) {
		applog(LOG_WARNING, "%s%d: %s() cgpu_info is null",
				    bitmain->drv->name, bitmain->device_id, __func__);
		return -1;
	}
	info = bitmain->device_data;

	/* clear read buf */
	ret = bitmain_read(bitmain, data, BITMAIN_READBUF_SIZE,
				  BITMAIN_RESET_TIMEOUT, C_BITMAIN_READ);
	if (ret > 0) {
		if (opt_debug) {
			applog(LOG_DEBUG, "%s%d: clear read(%d):",
				          bitmain->drv->name, bitmain->device_id, ret);
			hexdump(data, ret);
		}
	}

	sendlen = bitmain_set_rxstatus((struct bitmain_rxstatus_token *)sendbuf, 0, 1, 0, 0);
	if (sendlen <= 0) {
		applog(LOG_ERR, "%s%d: %s() set_rx error(%d)",
				bitmain->drv->name, bitmain->device_id, __func__, sendlen);
		return -1;
	}

	ret = bitmain_send_data(sendbuf, sendlen, bitmain);
	if (unlikely(ret == BTM_SEND_ERROR)) {
		applog(LOG_ERR, "%s%d: %s() send_data error",
				bitmain->drv->name, bitmain->device_id, __func__);
		return -1;
	}
	while (trycount >= 0) {
		ret = bitmain_read(bitmain, data+readlen, BITMAIN_READBUF_SIZE,
				   BITMAIN_RESET_TIMEOUT, C_BITMAIN_DATA_RXSTATUS);
		if (ret > 0) {
			readlen += ret;
			if (readlen > BITMAIN_READ_SIZE) {
				for (i = 0; i < readlen; i++) {
					if (data[i] == 0xa1) {
						if (opt_debug) {
							applog(LOG_DEBUG, "%s%d: initset get:",
									  bitmain->drv->name,
									  bitmain->device_id);
							hexdump(data, readlen);
						}
#ifdef USE_ANT_S1
						if (data[i+1] > 124) {
							applog(LOG_ERR, "%s%d: %s() rxstatus datalen=%d error",
									bitmain->drv->name, bitmain->device_id,
									__func__, data[i+1]+2);
							continue;
						}
						if (readlen-i < data[i+1]+2) {
							applog(LOG_ERR, "%s%d: %s() rxstatus datalen=%d low",
									bitmain->drv->name, bitmain->device_id,
									__func__, data[i+1]+2);
							continue;
						}
						if (bitmain_parse_rxstatus(data+i, data[i+1]+2, &rxstatusdata) != 0) {
							applog(LOG_ERR, "%s%d: %s() parse_rxstatus error",
									bitmain->drv->name, bitmain->device_id,
									__func__);
							continue;
						}
						info->chain_num = rxstatusdata.chain_num;
						info->fifo_space = rxstatusdata.fifo_space;
						info->nonce_error = 0;
						info->last_nonce_error = 0;
						applog(LOG_ERR, "%s%d: %s() parse_rxstatus "
								"version(%d) chain_num(%d) fifo_space(%d) "
								"nonce_error(%d) freq=%d",
								bitmain->drv->name, bitmain->device_id,
								__func__,
								rxstatusdata.version,
								info->chain_num,
								info->fifo_space,
								rxstatusdata.nonce_error,
								info->frequency);
						for (i = 0; i < rxstatusdata.chain_num; i++) {
							info->chain_asic_num[i] = rxstatusdata.chain_asic_num[i];
							info->chain_asic_status[i] = rxstatusdata.chain_asic_status[i];
							memset(info->chain_asic_status_t[i], 0, 40);
							j = 0;
							for (m = 0; m < 32; m++) {
								if (m%8 == 0 && m != 0) {
									info->chain_asic_status_t[i][j] = ' ';
									j++;
								}
								checkbit = num2bit(m);
								if (rxstatusdata.chain_asic_status[i] & checkbit)
									info->chain_asic_status_t[i][j] = 'o';
								else
									info->chain_asic_status_t[i][j] = 'x';

								j++;
							}
							applog(LOG_ERR, "%s%d: %s() parse_rxstatus chain(%d) "
									"asic_num=%d asic_status=%08x-%s",
									bitmain->drv->name, bitmain->device_id,
									__func__, i, info->chain_asic_num[i],
									info->chain_asic_status[i],
									info->chain_asic_status_t[i]);
						}
#else // S2
						memcpy(&packethead, data+i, sizeof(struct bitmain_packet_head));
						packethead.length = htole16(packethead.length);

						if (packethead.length > 1130) {
							applog(LOG_ERR, "%s%d: %s() rxstatus datalen=%d error",
									bitmain->drv->name, bitmain->device_id,
									__func__, packethead.length+4);
							continue;
						}
						if (readlen-i < packethead.length+4) {
							applog(LOG_ERR, "%s%d: %s() rxstatus datalen=%d<%d low",
									bitmain->drv->name, bitmain->device_id,
									__func__, readlen-i, packethead.length+4);
							continue;
						}
						if (bitmain_parse_rxstatus(data+i, packethead.length+4, &rxstatusdata) != 0) {
							applog(LOG_ERR, "%s%d: %s() parse_rxstatus error",
									bitmain->drv->name, bitmain->device_id,
									__func__);
							continue;
						}
						info->chain_num = rxstatusdata.chain_num;
						info->fifo_space = rxstatusdata.fifo_space;
						info->hw_version[0] = rxstatusdata.hw_version[0];
						info->hw_version[1] = rxstatusdata.hw_version[1];
						info->hw_version[2] = rxstatusdata.hw_version[2];
						info->hw_version[3] = rxstatusdata.hw_version[3];
						info->nonce_error = 0;
						info->last_nonce_error = 0;
						applog(LOG_ERR, "%s%d: %s() parse_rxstatus "
								"version(%d) chain_num(%d) fifo_space(%d) "
								"hwv1(%d) hwv2(%d) hwv3(%d) hwv4(%d) "
								"nonce_error(%d) freq=%d",
								bitmain->drv->name, bitmain->device_id,
								__func__, rxstatusdata.version,
								info->chain_num, info->fifo_space,
								info->hw_version[0], info->hw_version[1],
								info->hw_version[2], info->hw_version[3],
								rxstatusdata.nonce_error,
								info->frequency);

						memcpy(info->chain_asic_exist,
							rxstatusdata.chain_asic_exist,
							BITMAIN_MAX_CHAIN_NUM*32);
						memcpy(info->chain_asic_status,
							rxstatusdata.chain_asic_status,
							BITMAIN_MAX_CHAIN_NUM*32);
						for (i = 0; i < rxstatusdata.chain_num; i++) {
							info->chain_asic_num[i] = rxstatusdata.chain_asic_num[i];
							memset(info->chain_asic_status_t[i], 0, 320);
							j = 0;
							if (info->chain_asic_num[i] <= 0)
								asicnum = 0;
							else {
								if (info->chain_asic_num[i] % 32 == 0)
									asicnum = info->chain_asic_num[i] / 32;
								else
									asicnum = info->chain_asic_num[i] / 32 + 1;
							}
							if (asicnum > 0) {
								for (m = asicnum-1; m >= 0; m--) {
									for (r = 0; r < 32; r++) {
										if (r%8 == 0 && r != 0) {
											info->chain_asic_status_t[i][j] = ' ';
											j++;
										}
										checkbit = num2bit(r);
										if (rxstatusdata.chain_asic_exist[i*8+m] & checkbit) {
											if (rxstatusdata.chain_asic_status[i*8+m] & checkbit)
												info->chain_asic_status_t[i][j] = 'o';
											else
												info->chain_asic_status_t[i][j] = 'x';
										} else
											info->chain_asic_status_t[i][j] = '-';
										j++;
									}
									info->chain_asic_status_t[i][j] = ' ';
									j++;
								}
							}
							applog(LOG_DEBUG, "%s%d: %s() chain(%d) asic_num=%d "
									  "asic_exist=%08x%08x%08x%08x%08x%08x%08x%08x "
									  "asic_status=%08x%08x%08x%08x%08x%08x%08x%08x",
									  bitmain->drv->name, bitmain->device_id,
									  __func__, i, info->chain_asic_num[i],
									  info->chain_asic_exist[i*8+0],
									  info->chain_asic_exist[i*8+1],
									  info->chain_asic_exist[i*8+2],
									  info->chain_asic_exist[i*8+3],
									  info->chain_asic_exist[i*8+4],
									  info->chain_asic_exist[i*8+5],
									  info->chain_asic_exist[i*8+6],
									  info->chain_asic_exist[i*8+7],
									  info->chain_asic_status[i*8+0],
									  info->chain_asic_status[i*8+1],
									  info->chain_asic_status[i*8+2],
									  info->chain_asic_status[i*8+3],
									  info->chain_asic_status[i*8+4],
									  info->chain_asic_status[i*8+5],
									  info->chain_asic_status[i*8+6],
									  info->chain_asic_status[i*8+7]);
							applog(LOG_ERR, "%s%d: %s() chain(%d) "
									"asic_num=%d asic_status=%s",
									bitmain->drv->name, bitmain->device_id,
									__func__, i, info->chain_asic_num[i],
									info->chain_asic_status_t[i]);
						}
#endif
						bitmain_update_temps(bitmain, info, &rxstatusdata);
						statusok = 1;
						break;
					}
				}
				if (statusok)
					break;
			}
		}
		trycount--;
		p.tv_sec = 0;
		p.tv_nsec = BITMAIN_RESET_PITCH;
		nanosleep(&p, NULL);
	}

	p.tv_sec = 0;
	p.tv_nsec = BITMAIN_RESET_PITCH;
	nanosleep(&p, NULL);

	cgtime(&info->last_status_time);

	if (statusok) {
		applog(LOG_ERR, "%s%d: %s() set_txconfig",
				bitmain->drv->name, bitmain->device_id, __func__);

		if (opt_bitmain_hwerror)
			hwerror_eft = 1;
		else
			hwerror_eft = 0;
		if (opt_bitmain_beeper)
			beeper_ctrl = 1;
		else
			beeper_ctrl = 0;
		if (opt_bitmain_tempoverctrl)
			tempover_ctrl = 1;
		else
			tempover_ctrl = 0;
		if (opt_bitmain_homemode)
			home_mode = 1;
		else
			home_mode = 0;

#ifdef USE_ANT_S1
		uint8_t _voltage[2] = { BITMAIN_DEFAULT_VOLTAGE, 0 };
#else
		uint8_t _voltage[2] = { info->voltage[0], info->voltage[1] };
#endif
		sendlen = bitmain_set_txconfig((struct bitmain_txconfig_token *)sendbuf,
						1, 1, 1, 1, 1, 0, 1, hwerror_eft,
						beeper_ctrl, tempover_ctrl, home_mode,
						info->chain_num, info->asic_num,
						BITMAIN_DEFAULT_FAN_MAX_PWM, info->timeout,
						info->frequency, _voltage,
						0, 0, 0x04, info->reg_data);

		if (sendlen <= 0) {
			applog(LOG_ERR, "%s%d: %s() set_txconfig error(%d)",
					bitmain->drv->name, bitmain->device_id, __func__, sendlen);
			return -1;
		}

		ret = bitmain_send_data(sendbuf, sendlen, bitmain);
		if (unlikely(ret == BTM_SEND_ERROR)) {
			applog(LOG_ERR, "%s%d: %s() send_data error",
					bitmain->drv->name, bitmain->device_id, __func__);
			return -1;
		}
		applog(LOG_WARNING, "%s%d: %s() succeeded",
				    bitmain->drv->name, bitmain->device_id, __func__);
	} else {
		applog(LOG_WARNING, "%s%d: %s() failed",
				    bitmain->drv->name, bitmain->device_id, __func__);
		return -1;
	}
	return 0;
}

#ifdef USE_ANT_S1
static void ant_info(struct bitmain_info *info, int baud, int chain_num, int asic_num, int timeout, int frequency, uint8_t *reg_data)
#else
static void ant_info(struct bitmain_info *info, int baud, int chain_num, int asic_num)
#endif
{
	info->baud = baud;
	info->chain_num = chain_num;
	info->asic_num = asic_num;

#ifdef USE_ANT_S1
	info->timeout = timeout;
	info->frequency = frequency;
	memcpy(info->reg_data, reg_data, 4);
	info->voltage = BITMAIN_DEFAULT_VOLTAGE;
#else
	info->timeout = BITMAIN_DEFAULT_TIMEOUT;
	info->frequency = BITMAIN_DEFAULT_FREQUENCY;
	memset(info->reg_data, BITMAIN_DEFAULT_REG_DATA, 4);
	info->voltage[0] = BITMAIN_VOLTAGE0_DEF;
	info->voltage[1] = BITMAIN_VOLTAGE1_DEF;

	if (opt_bitmain_freq) {
		char buf[BUFSIZ+1];
		char *colon, *colon2;
		uint8_t reg_data[4];
		int timeout, freq;
		size_t len;

		memcpy(buf, opt_bitmain_freq, sizeof(buf));
		buf[sizeof(buf)-1] = '\0';
		colon = strchr(buf, ':');
		if (colon)
			*(colon++) = '\0';
		timeout = atoi(buf);
		if (timeout > 0 && timeout <= 0xff)
			info->timeout = timeout;
		if (colon && *colon) {
			colon2 = strchr(colon, ':');
			if (colon2)
				*(colon2++) = '\0';
			freq = atoi(colon);
			if (freq >= BITMAIN_MIN_FREQUENCY &&
			    freq <= BITMAIN_MAX_FREQUENCY) {
				info->frequency = freq;
			}
			if (colon2 && *colon2) {
				len = strlen(colon2);
				if (len > 1 && len <= 8 && (len & 1) == 0) {
					memset(reg_data, BITMAIN_DEFAULT_REG_DATA, 4);
					if (hex2bin(reg_data, colon2, len/2))
						memcpy(info->reg_data, reg_data, len/2);
				}
			}
		}
	}

	if (opt_bitmain_voltage) {
		unsigned char v[2];
		if (hex2bin(v, opt_bitmain_voltage, 2)) {
			info->voltage[0] = (uint8_t)(v[0]);
			info->voltage[1] = (uint8_t)(v[1]);
		}
	}
#endif

	info->fan_pwm = BITMAIN_DEFAULT_FAN_MIN_PWM;
	info->temp_max = 0;
	/* This is for check the temp/fan every 3~4s */
	info->temp_history_count = (4 / (float)((float)info->timeout * ((float)1.67/0x32))) + 1;
	if (info->temp_history_count <= 0)
		info->temp_history_count = 1;

	info->temp_history_index = 0;
	info->temp_sum = 0;
}

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
static struct cgpu_info *bitmain_detect_one(libusb_device *dev, struct usb_find_devices *found)
{
	int baud, chain_num, asic_num = 0;
#ifdef USE_ANT_S1
	int timeout, frequency = 0;
	uint8_t reg_data[4] = {0};
#endif
	struct bitmain_info *info;
	struct cgpu_info *bitmain;
	bool configured;
	int ret;

	if (!opt_bitmain_options || !(*opt_bitmain_options)) {
		applog(LOG_ERR, "%s: no bitmain-options specified", ANTDRV.dname);
		return NULL;
	}

	bitmain = usb_alloc_cgpu(&ANTDRV, BITMAIN_MINER_THREADS);

	baud = BITMAIN_IO_SPEED;
	chain_num = BITMAIN_DEFAULT_CHAIN_NUM;
	asic_num = BITMAIN_DEFAULT_ASIC_NUM;
#ifdef USE_ANT_S1
	timeout = BITMAIN_DEFAULT_TIMEOUT;
	frequency = BITMAIN_DEFAULT_FREQUENCY;
#endif

	if (!usb_init(bitmain, dev, found))
		goto shin;

#ifdef USE_ANT_S1
	configured = get_options(++option_offset, &baud, &chain_num,
				 &asic_num, &timeout, &frequency, reg_data);
#else
	configured = get_options(++option_offset, &baud, &chain_num, &asic_num);
#endif

	/* Even though this is an FTDI type chip, we want to do the parsing
	 * all ourselves so set it to std usb type */
	bitmain->usbdev->usb_type = USB_TYPE_STD;

	bitmain->device_data = calloc(sizeof(struct bitmain_info), 1);
	if (unlikely(!(bitmain->device_data)))
		quit(1, "Failed to calloc bitmain_info data");
	info = bitmain->device_data;

#ifdef USE_ANT_S1
	if (configured)
		ant_info(info, baud, chain_num, asic_num, timeout, frequency, reg_data);
	else
		ant_info(info, BITMAIN_IO_SPEED, BITMAIN_DEFAULT_CHAIN_NUM,
			  BITMAIN_DEFAULT_ASIC_NUM, BITMAIN_DEFAULT_TIMEOUT,
			  BITMAIN_DEFAULT_FREQUENCY, reg_data);
#else
	if (configured)
		ant_info(info, baud, chain_num, asic_num);
	else
		ant_info(info, BITMAIN_IO_SPEED, BITMAIN_DEFAULT_CHAIN_NUM, BITMAIN_DEFAULT_ASIC_NUM);

#endif

	if (!add_cgpu(bitmain))
		goto unshin;

	applog(LOG_ERR, "%s: detected %s%d",
			ANTDRV.dname, bitmain->drv->name, bitmain->device_id);
	ret = bitmain_initialize(bitmain);
	if (ret && !configured)
		goto unshin;

	update_usb_stats(bitmain);

	info->errorcount = 0;

	info->work_list = k_new_list("Work", sizeof(WITEM), ALLOC_WITEMS, LIMIT_WITEMS, true);
	info->work_ready = k_new_store(info->work_list);
#ifdef USE_ANT_S3
	info->wbuild = k_new_store(info->work_list);
	dupalloc(bitmain, 10);
#endif

	applog(LOG_DEBUG, "%s%d: detected %s "
			  "chain_num=%d asic_num=%d timeout=%d frequency=%d",
			  bitmain->drv->name, bitmain->device_id, bitmain->device_path,
			  info->chain_num, info->asic_num, info->timeout,
			  info->frequency);

	return bitmain;

unshin:

	usb_uninit(bitmain);

shin:

	free(bitmain->device_data);
	bitmain->device_data = NULL;

	bitmain = usb_free_cgpu(bitmain);

	return NULL;
}
#else // S2 (and only S2)
static void ser_detect()
{
	int baud, chain_num = 0, asic_num = 0;
	struct cgpu_info *bitmain;
	struct bitmain_info *info;
	bool configured;
	int ret;

	applog(LOG_WARNING, "%s: checking for %s", ANTDRV.dname, opt_bitmain_dev);

	if (!opt_bitmain_options || !(*opt_bitmain_options)) {
		applog(LOG_ERR, "%s: no bitmain-options specified", ANTDRV.dname);
		return;
	}

	bitmain = calloc(1, sizeof(*bitmain));
	if (unlikely(!bitmain))
		quithere(1, "Failed to calloc bitmain");

	bitmain->drv = &ANTDRV;
	bitmain->deven = DEV_ENABLED;
	bitmain->threads = 1;

	configured = get_options(++option_offset, &baud, &chain_num, &asic_num);

	info = calloc(1, sizeof(*info));
	if (unlikely(!info))
		quit(1, "Failed to calloc bitmain_info");
	bitmain->device_data = (void *)info;

	info->device_fd = open(opt_bitmain_dev, O_RDWR|O_EXCL|O_NONBLOCK);
	if (info->device_fd == -1) {
		applog(LOG_DEBUG, "%s open %s error %d",
				  bitmain->drv->dname, opt_bitmain_dev, errno);
		goto giveup;
	}

	bitmain->device_path = strdup(opt_bitmain_dev);

	if (configured)
		ant_info(info, baud, chain_num, asic_num);
	else
		ant_info(info, BITMAIN_IO_SPEED, BITMAIN_DEFAULT_CHAIN_NUM, BITMAIN_DEFAULT_ASIC_NUM);

	if (!add_cgpu(bitmain))
		goto cleen;

	ret = bitmain_initialize(bitmain);
	if (ret && !configured)
		goto cleen;

	info->errorcount = 0;

	info->work_list = k_new_list("Work", sizeof(WITEM), ALLOC_WITEMS, LIMIT_WITEMS, true);
	info->work_ready = k_new_store(info->work_list);
	info->wbuild = k_new_store(info->work_list);

	applog(LOG_DEBUG, "%s%d: detected %s "
			  "chain_num=%d asic_num=%d timeout=%d frequency=%d",
			  bitmain->drv->name, bitmain->device_id, bitmain->device_path,
			  info->chain_num, info->asic_num, info->timeout,
			  info->frequency);

	dupalloc(bitmain, 10);

	return;

cleen:
	if (info->device_fd != -1)
		close(info->device_fd);
	free(bitmain->device_path);

giveup:
	free(info);
	free(bitmain);
}
#endif

#ifdef USE_ANT_S1
static void ants1_detect(bool __maybe_unused hotplug)
{
	usb_detect(&ANTDRV, bitmain_detect_one);
}
#endif

#ifdef USE_ANT_S3
static void ants3_detect(bool __maybe_unused hotplug)
{
	usb_detect(&ANTDRV, bitmain_detect_one);
}
#else
#ifdef USE_ANT_S2
static bool first_ant = true;

static void ants2_detect(bool __maybe_unused hotplug)
{
	// Only ever do this once
	if (!first_ant)
		return;

	first_ant = false;

	ser_detect();
}
#endif
#endif

static void do_bitmain_close(struct thr_info *thr)
{
	struct cgpu_info *bitmain = thr->cgpu;
	struct bitmain_info *info = bitmain->device_data;

	pthread_join(info->read_thr, NULL);
	bitmain_running_reset(info);

	info->no_matching_work = 0;

	cgsem_destroy(&info->write_sem);
}

static void get_bitmain_statline_before(char *buf, size_t bufsiz, struct cgpu_info *bitmain)
{
	struct bitmain_info *info = bitmain->device_data;
	int lowfan = 10000;
	int i = 0;

	/* Find the lowest fan speed of the ASIC cooling fans. */
	for (i = 0; i < info->fan_num; i++) {
		if (info->fan[i] >= 0 && info->fan[i] < lowfan)
			lowfan = info->fan[i];
	}

	tailsprintf(buf, bufsiz, "%2d/%3dC %04dR", info->temp_avg, info->temp_max, lowfan);
}

/* We use a replacement algorithm to only remove references to work done from
 * the buffer when we need the extra space for new work. */
static bool bitmain_fill(struct cgpu_info *bitmain)
{
	struct bitmain_info *info = bitmain->device_data;
	struct work *work, *usework;
	bool ret = true, dodelay = false;
	int sendret = 0, sentcount = 0, neednum = 0, queuednum = 0, sendnum = 0, sendlen = 0;
	int loop_count = 0, roll, roll_limit;
	uint8_t sendbuf[BITMAIN_SENDBUF_SIZE];
	cgtimer_t ts_start;
	int senderror = 0;
	struct timeval now, stt;
	int timediff = 0;
	K_ITEM *witem;
	bool did = false;

#ifdef USE_ANT_S1
	/*
	 * Overheat just means delay the next work
	 * since the temperature reply is only found with a work reply,
	 * we can only sleep and hope it will cool down
	 * TODO: of course it may be possible to read the temperature
	 * without sending work ...
	 */
	if (info->overheat == true) {
		if (info->overheat_sleep_ms == 0)
			info->overheat_sleep_ms = BITMAIN_OVERHEAT_SLEEP_MS_DEF;

		/*
		 * If we slept and we are still here, and the temp didn't drop,
		 * increment the sleep time to find a sleep time that causes a
		 * temperature drop
		 */
		if (info->overheat_slept) {
			if (info->overheat_temp > info->temp_hi)
				info->overheat_temp = info->temp_hi;
			else {
				if (info->overheat_sleep_ms < BITMAIN_OVERHEAT_SLEEP_MS_MAX)
					info->overheat_sleep_ms += BITMAIN_OVERHEAT_SLEEP_MS_STEP;
			}
		}

		applog(LOG_DEBUG, "%s%d: %s() sleeping %"PRIu32" - overheated",
				  bitmain->drv->name, bitmain->device_id,
				  __func__, info->overheat_sleep_ms);
		cgsleep_ms(info->overheat_sleep_ms);
		info->overheat_sleeps++;
		info->overheat_slept = info->overheat_sleep_ms;
		info->overheat_total_sleep += info->overheat_sleep_ms;
	} else {
		// If we slept and it cooled then try less next time
		if (info->overheat_slept) {
			if (info->overheat_sleep_ms > BITMAIN_OVERHEAT_SLEEP_MS_MIN)
				info->overheat_sleep_ms -= BITMAIN_OVERHEAT_SLEEP_MS_STEP;
			info->overheat_slept = 0;
		}

	}
#endif

	PROFILE_START(stt);

	applog(LOG_DEBUG, "%s%d: %s() start",
			  bitmain->drv->name, bitmain->device_id,
			  __func__);
	info->fill_calls++;
	mutex_lock(&info->qlock);
	if (info->fifo_space <= 0) {
		applog(LOG_DEBUG, "%s%d: %s() fifo space empty",
				  bitmain->drv->name, bitmain->device_id,
				  __func__);
		ret = true;
		info->fill_nospace++;
		dodelay = true;
		goto out_unlock;
	}

	if (info->queued >= BITMAIN_MAX_WORK_QUEUE_NUM)
		ret = true;
	else
		ret = false;

#ifdef USE_ANT_S2
	if (info->fifo_space > 0) {
		work = get_queued(bitmain);
		if (!work) {
			// Ignore until work is first available
			if (!info->got_work)
				info->fill_start_nowork++;
			else {
				if (info->fifo_space < BITMAIN_MAX_WORK_NUM)
					neednum = info->fifo_space;
				else
					neednum = BITMAIN_MAX_WORK_NUM;

				queuednum = info->queued;

				int need = neednum - queuednum;
				if (need > BITMAIN_MAX_WORK_NUM) {
					need = BITMAIN_MAX_WORK_NUM;
					info->need_over++;
				} else {
					if (need < 0)
						need = 0;
				}
				info->fill_nowork++;
				info->need_nowork[need]++;
			}
			goto out_unlock;
		}
		info->got_work = true;

		roll_limit = work->drv_rolllimit;
		info->fill_rolltot += roll_limit;
		if (info->fill_roll == 0)
			info->fill_rollmin = info->fill_rollmax = roll_limit;
		else {
			if (info->fill_rollmin > roll_limit)
				info->fill_rollmin = roll_limit;
			if (info->fill_rollmax < roll_limit)
				info->fill_rollmax = roll_limit;
		}
		info->fill_roll++;
		roll = 0;
	}
#endif

#ifdef USE_ANT_S1
	while (info->fifo_space > 0) {
#else
	while (info->fifo_space > 0 && roll <= roll_limit) {
#endif
		loop_count++;
		did = true;
		info->fifo_checks++;
		if (info->fifo_space < BITMAIN_MAX_WORK_NUM) {
			neednum = info->fifo_space;
			info->fill_neededless++;
		} else
			neednum = BITMAIN_MAX_WORK_NUM;

		info->fill_totalneeded += neednum;
		info->fill_need[neednum]++;

		queuednum = info->queued;
		applog(LOG_DEBUG, "%s%d: Work task queued(%d) fifo space(%d) needsend(%d)",
				  bitmain->drv->name, bitmain->device_id,
				  queuednum, info->fifo_space, neednum);
		info->fill_want += (neednum - queuednum);

#ifdef USE_ANT_S1
		while (queuednum < neednum) {
			work = get_queued(bitmain);
			if (!work) {
				// Ignore until work is first available
				if (!info->got_work)
					info->fill_start_nowork++;
				else {
					int need = neednum - queuednum;
					if (need > BITMAIN_MAX_WORK_NUM) {
						need = BITMAIN_MAX_WORK_NUM;
						info->need_over++;
					} else {
						if (need < 0)
							need = 0;
					}
					info->fill_nowork++;
					info->need_nowork[need]++;
				}
				break;
			} else {
				info->got_work = true;
				roll_limit = work->drv_rolllimit;
				info->fill_rolltot += roll_limit;
				if (info->fill_roll == 0)
					info->fill_rollmin = info->fill_rollmax = roll_limit;
				else {
					if (info->fill_rollmin > roll_limit)
						info->fill_rollmin = roll_limit;
					if (info->fill_rollmax < roll_limit)
						info->fill_rollmax = roll_limit;
				}
				info->fill_roll++;
				roll = 0;
				while (queuednum < neednum && roll <= roll_limit) {
					applog(LOG_DEBUG, "%s%d: get work queued number:%d"
							  " neednum:%d",
							  bitmain->drv->name,
							  bitmain->device_id,
							  queuednum, neednum);

					// Using devflag to say if it was rolled
					if (roll == 0) {
						usework = work;
						usework->devflag = false;
					} else {
						usework = copy_work_noffset(work, roll);
						usework->devflag = true;
					}

					witem = k_unlink_tail(info->work_list);
					if (DATAW(witem)->work) {
						// Was it rolled?
						if (DATAW(witem)->work->devflag)
							free_work(DATAW(witem)->work);
						else
							work_completed(bitmain, DATAW(witem)->work);
					}
					DATAW(witem)->work = usework;
					DATAW(witem)->wid = ++info->last_wid;
					info->queued++;
					k_add_head(info->work_ready, witem);
					queuednum++;
					roll++;
				}
				if (queuednum < neednum)
					info->fill_rolllimit++;
			}
		}
#else
		while (queuednum < neednum && roll <= roll_limit) {
			applog(LOG_DEBUG, "%s%d: get work queued number:%d"
					  " neednum:%d",
					  bitmain->drv->name,
					  bitmain->device_id,
					  queuednum, neednum);

			// Using devflag to say if it was rolled
			if (roll == 0) {
				usework = work;
				usework->devflag = false;
			} else {
				usework = copy_work_noffset(work, roll);
				usework->devflag = true;
			}

			witem = k_unlink_tail(info->work_list);
			if (DATAW(witem)->work) {
				// Was it rolled?
				if (DATAW(witem)->work->devflag)
					free_work(DATAW(witem)->work);
				else
					work_completed(bitmain, DATAW(witem)->work);
			}
			DATAW(witem)->work = usework;
			DATAW(witem)->wid = ++info->last_wid;
			info->queued++;
			k_add_head(info->work_ready, witem);
			queuednum++;
			roll++;
		}
		if (queuednum < neednum)
			info->fill_rolllimit++;
#endif

		if (queuednum < BITMAIN_MAX_DEAL_QUEUE_NUM) {
			if (queuednum < neednum) {
				info->fill_toosmall++;
				info->fill_less += (neednum - queuednum);
				applog(LOG_DEBUG, "%s%d: Not enough work to send, queue num=%d",
						  bitmain->drv->name, bitmain->device_id,
						  queuednum);
				goto out_unlock;
			}
		}
		info->fill_sends++;
		sendnum = queuednum < neednum ? queuednum : neednum;
		info->fill_totalsend += sendnum;
		info->fill_send[sendnum]++;
		info->fill_sendless[neednum - sendnum]++;
		sendlen = bitmain_set_txtask(info, sendbuf, &(info->last_work_block), &sentcount);
		info->queued -= sendnum;
		info->send_full_space += sendnum;
		if (info->queued < 0)
			info->queued = 0;

		applog(LOG_DEBUG, "%s%d: Send work %d",
				  bitmain->drv->name, bitmain->device_id,
				  sentcount);
		if (sendlen > 0) {
			info->fifo_space -= sentcount;
			if (info->fifo_space < 0)
				info->fifo_space = 0;
			sendret = bitmain_send_data(sendbuf, sendlen, bitmain);
			if (unlikely(sendret == BTM_SEND_ERROR)) {
				info->fill_senderr++;
				applog(LOG_ERR, "%s%d: send work comms error",
						bitmain->drv->name, bitmain->device_id);
				//dev_error(bitmain, REASON_DEV_COMMS_ERROR);
				info->reset = true;
				info->errorcount++;
				senderror = 1;
				if (info->errorcount > 1000) {
					info->errorcount = 0;
					applog(LOG_ERR, "%s%d: Device disappeared,"
							" shutting down thread",
							bitmain->drv->name, bitmain->device_id);
					bitmain->shutdown = true;
				}
				goto out_unlock;
			} else {
				applog(LOG_DEBUG, "%s%d: send_data ret=%d",
						  bitmain->drv->name, bitmain->device_id,
						  sendret);
				info->errorcount = 0;
			}
		} else {
			info->fill_seterr++;
			applog(LOG_DEBUG, "%s%d: Send work set_txtask error: %d",
					  bitmain->drv->name, bitmain->device_id,
					  sendlen);
			goto out_unlock;
		}
	}

out_unlock:
	if (loop_count > BITMAIN_MAX_WORK_NUM)
		loop_count = BITMAIN_MAX_WORK_NUM;
	info->fill_loop_count[loop_count]++;

	if (did) {
		PROFILE_FINISH(stt, info->fill_usec_count, info->fill_usec,
				info->fill_usec_ranges);
	} else
		PROFILE_ZERO(info->fill_usec_ranges);

	cgtime(&now);
	timediff = now.tv_sec - info->last_status_time.tv_sec;
	if (timediff < 0)
		timediff = -timediff;
	if (timediff > BITMAIN_SEND_STATUS_TIME) {
		PROFILE_START(stt);
		info->fill_sendstatus++;
		applog(LOG_DEBUG, "%s%d: Send RX Status Token fifo_space(%d) timediff(%d)",
				  bitmain->drv->name, bitmain->device_id,
				  info->fifo_space, timediff);
		copy_time(&(info->last_status_time), &now);

		sendlen = bitmain_set_rxstatus((struct bitmain_rxstatus_token *) sendbuf, 0, 0, 0, 0);
		if (sendlen > 0) {
			sendret = bitmain_send_data(sendbuf, sendlen, bitmain);
			if (unlikely(sendret == BTM_SEND_ERROR)) {
				applog(LOG_ERR, "%s%d: send status comms error",
						bitmain->drv->name, bitmain->device_id);
				//dev_error(bitmain, REASON_DEV_COMMS_ERROR);
				info->reset = true;
				info->errorcount++;
				senderror = 1;
				if (info->errorcount > 1000) {
					info->errorcount = 0;
					applog(LOG_ERR, "%s%d: Device disappeared,"
							" shutting down thread",
							bitmain->drv->name, bitmain->device_id);
					bitmain->shutdown = true;
				}
			} else {
				info->errorcount = 0;
				if (info->fifo_space <= 0) {
					senderror = 1;
				}
			}
		}
		PROFILE_FINISH(stt, info->fill_stat_usec_count, info->fill_stat_usec,
				info->fill_stat_usec_ranges);
	}

	if (info->send_full_space > BITMAIN_SEND_FULL_SPACE) {
		info->send_full_space = 0;
		ret = true;
	}
	mutex_unlock(&info->qlock);
	if (senderror) {
		ret = true;
		info->fill_sleepsa++;
		cgsleep_prepare_r(&ts_start);
		cgsleep_ms_r(&ts_start, 50);
	} else {
		if (dodelay) {
			info->fill_sleepsb++;
			cgsleep_ms(opt_bitmain_workdelay);
		}
	}
	return ret;
}

static int64_t bitmain_scanhash(struct thr_info *thr)
{
	struct cgpu_info *bitmain = thr->cgpu;
	struct bitmain_info *info = bitmain->device_data;
	const int chain_num = info->chain_num;
	struct timeval now, then, tdiff;
	int64_t hash_count, us_timeout;

	/* Half nonce range */
	us_timeout = 0x80000000ll / info->asic_num / info->frequency;
	tdiff.tv_sec = us_timeout / 1000000;
	tdiff.tv_usec = us_timeout - (tdiff.tv_sec * 1000000);
	cgtime(&now);
	timeradd(&now, &tdiff, &then);

	mutex_lock(&info->qlock);
	hash_count = 0xffffffffull * (uint64_t)info->nonces;
	info->results += info->nonces;
	if (info->results > chain_num)
		info->results = chain_num;
	if (!info->reset)
		info->results--;
	info->nonces = 0;
	mutex_unlock(&info->qlock);

	/* Check for nothing but consecutive bad results or consistently less
	 * results than we should be getting and reset the FPGA if necessary */
	//if (info->results < -chain_num && !info->reset) {
	//	applog(LOG_ERR, "%s%d: Result return rate low, resetting!",
	//			bitmain->drv->name, bitmain->device_id);
	//	info->reset = true;
	//}

#if (defined(USE_ANT_S1) || defined(USE_ANT_S3))
	if (unlikely(bitmain->usbinfo.nodev)) {
		applog(LOG_ERR, "%s%d: Device disappeared, shutting down thread",
				bitmain->drv->name, bitmain->device_id);
		bitmain->shutdown = true;
	}
#endif

	/* This hashmeter is just a utility counter based on returned shares */
	return hash_count;
}

static void bitmain_flush_work(struct cgpu_info *bitmain)
{
	struct bitmain_info *info = bitmain->device_data;
	//int i = 0;

	applog(LOG_ERR, "%s%d: %s() queued=%d",
			bitmain->drv->name, bitmain->device_id,
			__func__, info->queued);
	mutex_lock(&info->qlock);
	/* Will overwrite any work queued */
	info->queued = 0;
	k_list_transfer_to_tail(info->work_ready, info->work_list);
	//pthread_cond_signal(&info->qcond);
	mutex_unlock(&info->qlock);
}

static struct api_data *bitmain_api_stats(struct cgpu_info *cgpu)
{
	struct api_data *root = NULL;
	struct bitmain_info *info = cgpu->device_data;
	char workbuf[16 * (BITMAIN_MAX_WORK_NUM + 1)], *workptr;
	char usecbuf[16 * (PROFILE_STATS + 2)], *usecptr;
	char fillbuf[64];
	char rollbuf[64];
	char regbuf[16];
	float avg;
	int i = 0;
	size_t len;
	double hwp = (cgpu->hw_errors + cgpu->diff1) ?
			(double)(cgpu->hw_errors) / (double)(cgpu->hw_errors + cgpu->diff1) : 0;

	root = api_add_int(root, "baud", &(info->baud), false);
	root = api_add_int(root, "miner_count", &(info->chain_num), false);
	root = api_add_int(root, "asic_count", &(info->asic_num), false);
	root = api_add_int(root, "timeout", &(info->timeout), false);
	root = api_add_int(root, "frequency", &(info->frequency), false);
	snprintf(regbuf, sizeof(regbuf), "0x%02x%02x%02x%02x",
		 (int)(info->reg_data[0]), (int)(info->reg_data[1]),
		 (int)(info->reg_data[2]), (int)(info->reg_data[3]));
	root = api_add_string(root, "regdata", regbuf, true);
#ifdef USE_ANT_S1
	root = api_add_int(root, "voltage", &(info->voltage), false);
#else
	char vbuf[8];
	snprintf(vbuf, sizeof(vbuf), "0x%02x%02x",
		 (int)(info->voltage[0]), (int)(info->voltage[1]));
	root = api_add_string(root, "voltage", vbuf, true);
#endif
#ifdef USE_ANT_S2
	root = api_add_int(root, "hwv1", &(info->hw_version[0]), false);
	root = api_add_int(root, "hwv2", &(info->hw_version[1]), false);
	root = api_add_int(root, "hwv3", &(info->hw_version[2]), false);
	root = api_add_int(root, "hwv4", &(info->hw_version[3]), false);
#endif

	root = api_add_int(root, "fan_num", &(info->fan_num), false);
	root = api_add_int(root, "fan1", &(info->fan[0]), false);
	root = api_add_int(root, "fan2", &(info->fan[1]), false);
	root = api_add_int(root, "fan3", &(info->fan[2]), false);
	root = api_add_int(root, "fan4", &(info->fan[3]), false);
#ifdef USE_ANT_S2
	root = api_add_int(root, "fan5", &(info->fan[4]), false);
	root = api_add_int(root, "fan6", &(info->fan[5]), false);
	root = api_add_int(root, "fan7", &(info->fan[6]), false);
	root = api_add_int(root, "fan8", &(info->fan[7]), false);
	root = api_add_int(root, "fan9", &(info->fan[8]), false);
	root = api_add_int(root, "fan10", &(info->fan[9]), false);
	root = api_add_int(root, "fan11", &(info->fan[10]), false);
	root = api_add_int(root, "fan12", &(info->fan[11]), false);
	root = api_add_int(root, "fan13", &(info->fan[12]), false);
	root = api_add_int(root, "fan14", &(info->fan[13]), false);
	root = api_add_int(root, "fan15", &(info->fan[14]), false);
	root = api_add_int(root, "fan16", &(info->fan[15]), false);
#endif

	root = api_add_int(root, "temp_num", &(info->temp_num), false);
	root = api_add_int(root, "temp1", &(info->temp[0]), false);
	root = api_add_int(root, "temp2", &(info->temp[1]), false);
	root = api_add_int(root, "temp3", &(info->temp[2]), false);
	root = api_add_int(root, "temp4", &(info->temp[3]), false);
#ifdef USE_ANT_S2
	root = api_add_int(root, "temp5", &(info->temp[4]), false);
	root = api_add_int(root, "temp6", &(info->temp[5]), false);
	root = api_add_int(root, "temp7", &(info->temp[6]), false);
	root = api_add_int(root, "temp8", &(info->temp[7]), false);
	root = api_add_int(root, "temp9", &(info->temp[8]), false);
	root = api_add_int(root, "temp10", &(info->temp[9]), false);
	root = api_add_int(root, "temp11", &(info->temp[10]), false);
	root = api_add_int(root, "temp12", &(info->temp[11]), false);
	root = api_add_int(root, "temp13", &(info->temp[12]), false);
	root = api_add_int(root, "temp14", &(info->temp[13]), false);
	root = api_add_int(root, "temp15", &(info->temp[14]), false);
	root = api_add_int(root, "temp16", &(info->temp[15]), false);
#endif
	root = api_add_int(root, "temp_avg", &(info->temp_avg), true);
	root = api_add_int(root, "temp_max", &(info->temp_max), true);
	root = api_add_percent(root, "Device Hardware%", &hwp, true);
	root = api_add_int(root, "no_matching_work", &(info->no_matching_work), true);
	/*
	for (i = 0; i < info->chain_num; i++) {
		char mcw[24];

		sprintf(mcw, "match_work_count%d", i + 1);
		root = api_add_int(root, mcw, &(info->matching_work[i]), false);
	}*/

	root = api_add_int(root, "chain_acn1", &(info->chain_asic_num[0]), false);
	root = api_add_int(root, "chain_acn2", &(info->chain_asic_num[1]), false);
	root = api_add_int(root, "chain_acn3", &(info->chain_asic_num[2]), false);
	root = api_add_int(root, "chain_acn4", &(info->chain_asic_num[3]), false);
#ifdef USE_ANT_S2
	root = api_add_int(root, "chain_acn5", &(info->chain_asic_num[4]), false);
	root = api_add_int(root, "chain_acn6", &(info->chain_asic_num[5]), false);
	root = api_add_int(root, "chain_acn7", &(info->chain_asic_num[6]), false);
	root = api_add_int(root, "chain_acn8", &(info->chain_asic_num[7]), false);
	root = api_add_int(root, "chain_acn9", &(info->chain_asic_num[8]), false);
	root = api_add_int(root, "chain_acn10", &(info->chain_asic_num[9]), false);
	root = api_add_int(root, "chain_acn11", &(info->chain_asic_num[10]), false);
	root = api_add_int(root, "chain_acn12", &(info->chain_asic_num[11]), false);
	root = api_add_int(root, "chain_acn13", &(info->chain_asic_num[12]), false);
	root = api_add_int(root, "chain_acn14", &(info->chain_asic_num[13]), false);
	root = api_add_int(root, "chain_acn15", &(info->chain_asic_num[14]), false);
	root = api_add_int(root, "chain_acn16", &(info->chain_asic_num[15]), false);
#endif

	root = api_add_string(root, "chain_acs1", info->chain_asic_status_t[0], false);
	root = api_add_string(root, "chain_acs2", info->chain_asic_status_t[1], false);
	root = api_add_string(root, "chain_acs3", info->chain_asic_status_t[2], false);
	root = api_add_string(root, "chain_acs4", info->chain_asic_status_t[3], false);
#ifdef USE_ANT_S2
	root = api_add_string(root, "chain_acs5", info->chain_asic_status_t[4], false);
	root = api_add_string(root, "chain_acs6", info->chain_asic_status_t[5], false);
	root = api_add_string(root, "chain_acs7", info->chain_asic_status_t[6], false);
	root = api_add_string(root, "chain_acs8", info->chain_asic_status_t[7], false);
	root = api_add_string(root, "chain_acs9", info->chain_asic_status_t[8], false);
	root = api_add_string(root, "chain_acs10", info->chain_asic_status_t[9], false);
	root = api_add_string(root, "chain_acs11", info->chain_asic_status_t[10], false);
	root = api_add_string(root, "chain_acs12", info->chain_asic_status_t[11], false);
	root = api_add_string(root, "chain_acs13", info->chain_asic_status_t[12], false);
	root = api_add_string(root, "chain_acs14", info->chain_asic_status_t[13], false);
	root = api_add_string(root, "chain_acs15", info->chain_asic_status_t[14], false);
	root = api_add_string(root, "chain_acs16", info->chain_asic_status_t[15], false);
#endif

	root = api_add_int(root, "work_list_total", &(info->work_list->total), true);
	root = api_add_int(root, "work_list_count", &(info->work_list->count), true);
	root = api_add_int(root, "work_ready_count", &(info->work_ready->count), true);
	root = api_add_uint64(root, "work_search", &(info->work_search), true);
	root = api_add_uint64(root, "min_search", &(info->min_search), true);
	root = api_add_uint64(root, "max_search", &(info->max_search), true);
	avg = info->work_search ? (float)(info->tot_search) /
					(float)(info->work_search) : 0;
	root = api_add_avg(root, "avg_search", &avg, true);
	root = api_add_uint64(root, "failed_search", &(info->failed_search), true);
	root = api_add_uint64(root, "min_failed", &(info->min_failed), true);
	root = api_add_uint64(root, "max_failed", &(info->max_failed), true);
	avg = info->failed_search ? (float)(info->tot_failed) /
					(float)(info->failed_search) : 0;
	root = api_add_avg(root, "avg_failed", &avg, true);

	root = api_add_int(root, "temp_hi", &(info->temp_hi), false);
#ifdef USE_ANT_S1
	root = api_add_bool(root, "overheat", &(info->overheat), true);
	root = api_add_int(root, "overheat_temp", &(info->overheat_temp), true);
	root = api_add_uint32(root, "overheat_count", &(info->overheat_count), true);
	root = api_add_uint32(root, "overheat_sleep_ms", &(info->overheat_sleep_ms), true);
	root = api_add_uint32(root, "overheat_sleeps", &(info->overheat_sleeps), true);
	root = api_add_uint32(root, "overheat_slept", &(info->overheat_slept), true);
	root = api_add_uint64(root, "overheat_total_sleep", &(info->overheat_total_sleep), true);
	root = api_add_uint32(root, "overheat_recovers", &(info->overheat_recovers), true);
#endif
	root = api_add_uint64(root, "fill_calls", &(info->fill_calls), true);
	workptr = workbuf;
	for (i = 0; i <= BITMAIN_MAX_WORK_NUM; i++) {
		len = sizeof(workbuf) - (workptr - workbuf);
		if (len > 1) {
			snprintf(workptr, len, "%s%"PRId64,
				 i ? "/" : "", info->fill_loop_count[i]);
			workptr += strlen(workptr);
		}
	}
	root = api_add_string(root, "fill_loop_count", workbuf, true);
	avg = info->fill_usec_count ? (float)(info->fill_usec) /
					(float)(info->fill_usec_count) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRId64"/%.2fav %"PRId64,
					   info->fill_usec, avg,
					   info->fill_usec_count);
	root = api_add_string(root, "fill_usec", fillbuf, true);
	usecptr = usecbuf;
	for (i = 0; i < PROFILE_STATS+2; i++) {
		len = sizeof(usecbuf) - (usecptr - usecbuf);
		if (len > 1) {
			snprintf(usecptr, len, "%s%"PRId64,
				 i ? "/" : "", info->fill_usec_ranges[i]);
			usecptr += strlen(usecptr);
		}
	}
	root = api_add_string(root, "fill_usec_ranges", usecbuf, true);
	root = api_add_uint64(root, "fill_nospace", &(info->fill_nospace), true);
	root = api_add_uint64(root, "fifo_checks", &(info->fifo_checks), true);
	root = api_add_uint64(root, "fill_neededless", &(info->fill_neededless), true);
	avg = info->fifo_checks ? (float)(info->fill_totalneeded) /
					(float)(info->fifo_checks) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRIu64"/%.2fav", info->fill_totalneeded, avg);
	root = api_add_string(root, "fill_needed", fillbuf, true);
	workptr = workbuf;
	for (i = 0; i <= BITMAIN_MAX_WORK_NUM; i++) {
		len = sizeof(workbuf) - (workptr - workbuf);
		if (len > 1) {
			snprintf(workptr, len, "%s%"PRIu64,
				 i ? "/" : "", info->fill_need[i]);
			workptr += strlen(workptr);
		}
	}
	root = api_add_string(root, "fill_need", workbuf, true);
	avg = info->fifo_checks ? (float)(info->fill_want) /
					(float)(info->fifo_checks) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRIu64"/%.2fav", info->fill_want, avg);
	root = api_add_string(root, "fill_want", fillbuf, true);
	root = api_add_uint64(root, "fill_start_nowork", &(info->fill_start_nowork), true);
	root = api_add_uint64(root, "fill_nowork", &(info->fill_nowork), true);
	root = api_add_uint64(root, "fill_rolllimit", &(info->fill_rolllimit), true);
	root = api_add_uint64(root, "fill_toosmall", &(info->fill_toosmall), true);
	avg = info->fill_toosmall ? (float)(info->fill_less) /
					(float)(info->fill_toosmall) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRIu64" %.2fav", info->fill_less, avg);
	root = api_add_string(root, "fill_less", fillbuf, true);
	root = api_add_uint64(root, "fill_sends", &(info->fill_sends), true);
	avg = info->fill_sends ? (float)(info->fill_totalsend) /
					(float)(info->fill_sends) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRIu64"/%.2fav", info->fill_totalsend, avg);
	root = api_add_string(root, "fill_totalsend", fillbuf, true);
	workptr = workbuf;
	for (i = 0; i <= BITMAIN_MAX_WORK_NUM; i++) {
		len = sizeof(workbuf) - (workptr - workbuf);
		if (len > 1) {
			snprintf(workptr, len, "%s%"PRIu64,
				 i ? "/" : "", info->fill_send[i]);
			workptr += strlen(workptr);
		}
	}
	root = api_add_string(root, "fill_send", workbuf, true);
	workptr = workbuf;
	for (i = 0; i <= BITMAIN_MAX_WORK_NUM; i++) {
		len = sizeof(workbuf) - (workptr - workbuf);
		if (len > 1) {
			snprintf(workptr, len, "%s%"PRIu64,
				 i ? "/" : "", info->fill_sendless[i]);
			workptr += strlen(workptr);
		}
	}
	root = api_add_string(root, "fill_sendless", workbuf, true);
	root = api_add_uint64(root, "fill_seterr", &(info->fill_seterr), true);
	root = api_add_uint64(root, "fill_senderr", &(info->fill_senderr), true);
	root = api_add_uint64(root, "fill_sleepsa", &(info->fill_sleepsa), true);
	root = api_add_uint64(root, "fill_sleepsb", &(info->fill_sleepsb), true);

	workptr = workbuf;
	for (i = 0; i <= BITMAIN_MAX_WORK_NUM; i++) {
		len = sizeof(workbuf) - (workptr - workbuf);
		if (len > 1) {
			snprintf(workptr, len, "%s%"PRIu64,
				 i ? "/" : "", info->need_nowork[i]);
			workptr += strlen(workptr);
		}
	}
	len = sizeof(workbuf) - (workptr - workbuf);
	if (len > 1)
		snprintf(workptr, len, " %"PRIu64, info->need_over);
	root = api_add_string(root, "need_nowork", workbuf, true);
	avg = info->fill_roll ? (float)(info->fill_rolltot) / (float)(info->fill_roll) : 0;
	snprintf(rollbuf, sizeof(rollbuf), "%"PRIu64"/%d/%d/%.2fav",
		 info->fill_roll, info->fill_rollmin, info->fill_rollmax, avg);
	root = api_add_string(root, "roll", rollbuf, true);
	i = BITMAIN_SEND_STATUS_TIME;
	root = api_add_int(root, "send_status_time", &i, true);
	root = api_add_timeval(root, "last_status_time", &(info->last_status_time), true);
	root = api_add_uint64(root, "fill_sendstatus", &(info->fill_sendstatus), true);
	avg = info->fill_stat_usec_count ? (float)(info->fill_stat_usec) /
					(float)(info->fill_stat_usec_count) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRId64"/%.2fav %"PRId64,
					   info->fill_stat_usec, avg,
					   info->fill_stat_usec_count);
	root = api_add_string(root, "fill_stat_usec", fillbuf, true);
	usecptr = usecbuf;
	for (i = 0; i < PROFILE_STATS+2; i++) {
		len = sizeof(usecbuf) - (usecptr - usecbuf);
		if (len > 1) {
			snprintf(usecptr, len, "%s%"PRId64,
				 i ? "/" : "", info->fill_stat_usec_ranges[i]);
			usecptr += strlen(usecptr);
		}
	}
	root = api_add_string(root, "fill_stat_usec_ranges", usecbuf, true);
	root = api_add_uint64(root, "read_good", &(info->read_good), true);
	avg = info->read_good ? (float)(info->read_size) / (float)(info->read_good) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRIu64"/%d/%d/%.2fav",
		 info->read_size, info->read_sizemin, info->read_sizemax, avg);
	root = api_add_string(root, "read_size", fillbuf, true);
	root = api_add_uint64(root, "read_0s", &(info->read_0s), true);
	root = api_add_uint64(root, "read_18s", &(info->read_18s), true);
	root = api_add_uint64(root, "read_bad", &(info->read_bad), true);
	root = api_add_uint64(root, "readbuf_over", &(info->readbuf_over), true);
	root = api_add_uint64(root, "get_results", &(info->get_results), true);
	root = api_add_uint64(root, "get_sleepsa", &(info->get_sleepsa), true);
	root = api_add_uint64(root, "get_sleepsb", &(info->get_sleepsb), true);
	root = api_add_uint64(root, "get_sleepsc", &(info->get_sleepsc), true);
	avg = info->get_usec_count ? (float)(info->get_usec) /
					(float)(info->get_usec_count) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRId64"/%.2fav %"PRId64, info->get_usec,
					   avg, info->get_usec_count);
	root = api_add_string(root, "get_usec", fillbuf, true);
	usecptr = usecbuf;
	for (i = 0; i < PROFILE_STATS+2; i++) {
		len = sizeof(usecbuf) - (usecptr - usecbuf);
		if (len > 1) {
			snprintf(usecptr, len, "%s%"PRId64,
				 i ? "/" : "", info->get_usec_ranges[i]);
			usecptr += strlen(usecptr);
		}
	}
	root = api_add_string(root, "get_usec_ranges", usecbuf, true);
	avg = info->get_usec_count ? (float)(info->get_usec2) /
					(float)(info->get_usec_count) : 0;
	snprintf(fillbuf, sizeof(fillbuf), "%"PRId64"/%.2fav %"PRId64, info->get_usec2,
					   avg, info->get_usec_count);
	root = api_add_string(root, "get_usec2", fillbuf, true);
	usecptr = usecbuf;
	for (i = 0; i < PROFILE_STATS+2; i++) {
		len = sizeof(usecbuf) - (usecptr - usecbuf);
		if (len > 1) {
			snprintf(usecptr, len, "%s%"PRId64,
				 i ? "/" : "", info->get_usec2_ranges[i]);
			usecptr += strlen(usecptr);
		}
	}
	root = api_add_string(root, "get_usec2_ranges", usecbuf, true);

#ifdef USE_ANT_S2
	root = api_add_bool(root, "opt_bitmain_beeper", &opt_bitmain_beeper, false);
	root = api_add_bool(root, "opt_bitmain_tempoverctrl", &opt_bitmain_tempoverctrl, false);
#endif
	root = api_add_int(root, "opt_bitmain_temp", &opt_bitmain_temp, false);
	root = api_add_int(root, "opt_bitmain_workdelay", &opt_bitmain_workdelay, false);
	root = api_add_int(root, "opt_bitmain_overheat", &opt_bitmain_overheat, false);
	root = api_add_int(root, "opt_bitmain_fan_min", &opt_bitmain_fan_min, false);
	root = api_add_int(root, "opt_bitmain_fan_max", &opt_bitmain_fan_max, false);
	root = api_add_bool(root, "opt_bitmain_auto", &opt_bitmain_auto, false);
	root = api_add_bool(root, "opt_bitmain_homemode", &opt_bitmain_homemode, false);

	return root;
}

static void bitmain_shutdown(struct thr_info *thr)
{
	do_bitmain_close(thr);
}

char *set_bitmain_fan(char *arg)
{
	int val1, val2, ret;

	ret = sscanf(arg, "%d-%d", &val1, &val2);
	if (ret < 1)
		return "No values passed to bitmain-fan";
	if (ret == 1)
		val2 = val1;

	if (val1 < 0 || val1 > 100 || val2 < 0 || val2 > 100 || val2 < val1)
		return "Invalid value passed to bitmain-fan";

	opt_bitmain_fan_min = val1 * BITMAIN_PWM_MAX / 100;
	opt_bitmain_fan_max = val2 * BITMAIN_PWM_MAX / 100;

	return NULL;
}
#endif // LINUX

#ifdef USE_ANT_S1
struct device_drv ants1_drv = {
	.drv_id = DRIVER_ants1,
	.dname = "BitmainAntS1",
	.name = "ANT",
	.drv_detect = ants1_detect,
#ifdef LINUX
	.thread_prepare = bitmain_prepare,
	.hash_work = hash_queued_work,
	.queue_full = bitmain_fill,
	.scanwork = bitmain_scanhash,
	.flush_work = bitmain_flush_work,
	.get_api_stats = bitmain_api_stats,
	.get_statline_before = get_bitmain_statline_before,
	.reinit_device = bitmain_init,
	.thread_shutdown = bitmain_shutdown,
#endif
};
#endif

#ifdef USE_ANT_S2
#ifdef USE_ANT_S3
struct device_drv ants3_drv = {
	.drv_id = DRIVER_ants3,
	.dname = "BitmainAntS3",
	.name = "AS3",
	.drv_detect = ants3_detect,
#else
struct device_drv ants2_drv = {
	.drv_id = DRIVER_ants2,
	.dname = "BitmainAntS2",
	.name = "AS2",
	.drv_detect = ants2_detect,
#endif
#ifdef LINUX
	.thread_prepare = bitmain_prepare,
	.hash_work = hash_queued_work,
	.queue_full = bitmain_fill,
	.scanwork = bitmain_scanhash,
	.flush_work = bitmain_flush_work,
	.get_api_stats = bitmain_api_stats,
	.get_statline_before = get_bitmain_statline_before,
	.reinit_device = bitmain_init,
	.thread_shutdown = bitmain_shutdown,
#endif
};
#endif