RRM: Add AP mode minimal advertisement support for testing

The new hostapd.conf radio_measurements parameter can now be used to
configure a test build to advertise support for radio measurements with
neighbor report enabled. There is no real functionality that would
actually process the request, i.e., this only for the purpose of minimal
STA side testing for now.

Signed-off-by: Jouni Malinen <j@w1.fi>

hostapd/config_file.c

@@ -3129,6 +3129,8 @@ static int hostapd_config_fill(struct hostapd_config *conf,
 		pos++;
 		WPA_PUT_LE16(&bss->bss_load_test[3], atoi(pos));
 		bss->bss_load_test_set = 1;
+	} else if (os_strcmp(buf, "radio_measurements") == 0) {
+		bss->radio_measurements = atoi(pos);
 #endif /* CONFIG_TESTING_OPTIONS */
 	} else if (os_strcmp(buf, "vendor_elements") == 0) {
 		struct wpabuf *elems;

src/ap/ap_config.h

@@ -549,6 +549,8 @@ struct hostapd_bss_config {
 
 #define MESH_ENABLED BIT(0)
 	int mesh;
+
+	int radio_measurements;
 };
 
 

src/ap/beacon.c

@@ -32,6 +32,24 @@
 
 #ifdef NEED_AP_MLME
 
+static u8 * hostapd_eid_rm_enabled_capab(struct hostapd_data *hapd, u8 *eid,
+					 size_t len)
+{
+	if (!hapd->conf->radio_measurements || len < 2 + 4)
+		return eid;
+
+	*eid++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
+	*eid++ = 5;
+	*eid++ = (hapd->conf->radio_measurements & BIT(0)) ?
+		WLAN_RRM_CAPS_NEIGHBOR_REPORT : 0x00;
+	*eid++ = 0x00;
+	*eid++ = 0x00;
+	*eid++ = 0x00;
+	*eid++ = 0x00;
+	return eid;
+}
+
+
 static u8 * hostapd_eid_bss_load(struct hostapd_data *hapd, u8 *eid, size_t len)
 {
 	if (len < 2 + 5)
@@ -409,6 +427,8 @@ static u8 * hostapd_gen_probe_resp(struct hostapd_data *hapd,
 
 	pos = hostapd_eid_bss_load(hapd, pos, epos - pos);
 
+	pos = hostapd_eid_rm_enabled_capab(hapd, pos, epos - pos);
+
 #ifdef CONFIG_IEEE80211N
 	pos = hostapd_eid_ht_capabilities(hapd, pos);
 	pos = hostapd_eid_ht_operation(hapd, pos);
@@ -819,6 +839,10 @@ int ieee802_11_build_ap_params(struct hostapd_data *hapd,
 	tailpos = hostapd_eid_wpa(hapd, tailpos, tail + BEACON_TAIL_BUF_SIZE -
 				  tailpos);
 
+	tailpos = hostapd_eid_rm_enabled_capab(hapd, tailpos,
+					       tail + BEACON_TAIL_BUF_SIZE -
+					       tailpos);
+
 	tailpos = hostapd_eid_bss_load(hapd, tailpos,
 				       tail + BEACON_TAIL_BUF_SIZE - tailpos);
 

src/ap/ieee802_11.c

@@ -199,6 +199,9 @@ u16 hostapd_own_capab_info(struct hostapd_data *hapd, struct sta_info *sta,
 	    (hapd->iconf->spectrum_mgmt_required || dfs))
 		capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
 
+	if (hapd->conf->radio_measurements)
+		capab |= IEEE80211_CAP_RRM;
+
 	return capab;
 }