Sync with mac80211-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2017-01-13.

Signed-off-by: Jouni Malinen <j@w1.fi>

src/drivers/nl80211_copy.h

@@ -1772,7 +1772,9 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
  *	Notification Element based on association request when used with
- *	%NL80211_CMD_NEW_STATION; u8 attribute.
+ *	%NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when
+ *	%NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS);
+ *	u8 attribute.
  *
  * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
  *	%NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
@@ -1982,6 +1984,24 @@ enum nl80211_commands {
  * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also
  *	used in various commands/events for specifying the BSSID.
  *
+ * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which
+ *	other BSSs has to be better or slightly worse than the current
+ *	connected BSS so that they get reported to user space.
+ *	This will give an opportunity to userspace to consider connecting to
+ *	other matching BSSs which have better or slightly worse RSSI than
+ *	the current connected BSS by using an offloaded operation to avoid
+ *	unnecessary wakeups.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in
+ *	the specified band is to be adjusted before doing
+ *	%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out
+ *	better BSSs. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ *
+ * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out.
+ *	u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ *	e.g., with %NL80211_CMD_CONNECT event.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2388,6 +2408,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_BSSID,
 
+	NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI,
+	NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST,
+
+	NL80211_ATTR_TIMEOUT_REASON,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3080,6 +3105,13 @@ enum nl80211_reg_rule_attr {
  *	how this API was implemented in the past. Also, due to the same problem,
  *	the only way to create a matchset with only an RSSI filter (with this
  *	attribute) is if there's only a single matchset with the RSSI attribute.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether
+ *	%NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or
+ *	relative to current bss's RSSI.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for
+ *	BSS-es in the specified band is to be adjusted before doing
+ *	RSSI-based BSS selection. The attribute value is a packed structure
+ *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3089,6 +3121,8 @@ enum nl80211_sched_scan_match_attr {
 
 	NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4699,6 +4733,13 @@ enum nl80211_feature_flags {
  *	configuration (AP/mesh) with VHT rates.
  * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
  *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA
+ *	in @NL80211_CMD_FRAME while not associated.
+ * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports
+ *	randomized TA in @NL80211_CMD_FRAME while associated.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ *	for reporting BSSs with better RSSI than the current connected BSS
+ *	(%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4714,6 +4755,9 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_BEACON_RATE_HT,
 	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
 	NL80211_EXT_FEATURE_FILS_STA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+	NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4752,6 +4796,21 @@ enum nl80211_connect_failed_reason {
 	NL80211_CONN_FAIL_BLOCKED_CLIENT,
 };
 
+/**
+ * enum nl80211_timeout_reason - timeout reasons
+ *
+ * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified.
+ * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out.
+ * @NL80211_TIMEOUT_AUTH: Authentication timed out.
+ * @NL80211_TIMEOUT_ASSOC: Association timed out.
+ */
+enum nl80211_timeout_reason {
+	NL80211_TIMEOUT_UNSPECIFIED,
+	NL80211_TIMEOUT_SCAN,
+	NL80211_TIMEOUT_AUTH,
+	NL80211_TIMEOUT_ASSOC,
+};
+
 /**
  * enum nl80211_scan_flags -  scan request control flags
  *