Define new QCA vendor sub command for wifi test configuration

Define a new QCA vendor sub command for configuring the device with wifi
test configuration. Add new test config attributes for this sub command
that are used to configure the device for testbed configuration.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>

src/common/qca-vendor.h

@@ -441,6 +441,10 @@ enum qca_radiotap_vendor_ids {
  *	driver. Thermal temperature and indication of resume completion are
  *	reported as thermal events. The attributes for this command are defined
  *	in enum qca_wlan_vendor_attr_thermal_event.
+ *
+ * @QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION: Sub command to set WiFi
+ * 	test configuration. Attributes for this command are defined in
+ * 	enum qca_wlan_vendor_attr_wifi_test_config.
  */
 enum qca_nl80211_vendor_subcmds {
 	QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
@@ -596,6 +600,8 @@ enum qca_nl80211_vendor_subcmds {
 	/* Thermal shutdown commands to protect wifi chip */
 	QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD = 167,
 	QCA_NL80211_VENDOR_SUBCMD_THERMAL_EVENT = 168,
+	/* Wi-Fi test configuration subcommand */
+	QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,
 };
 
 
@@ -5100,4 +5106,124 @@ enum qca_wlan_vendor_attr_thermal_event {
 	QCA_WLAN_VENDOR_ATTR_THERMAL_EVENT_AFTER_LAST - 1,
 };
 
+/**
+ * enum he_fragmentation_val - HE fragmentation support values
+ * Indicates level of dynamic fragmentation that is supported by
+ * a STA as a recipient.
+ * HE fragmentation values are defined in IEEE P802.11ax/D2.0, 9.4.2.237.2
+ * (HE MAC Capabilities Information field) and are used in HE Capabilities
+ * element to advertise the support. These values are validated in the driver
+ * to check the device capability and advertised in the HE Capabilities
+ * element. These values are used to configure testbed device to allow the
+ * advertised hardware capabilities to be downgraded for testing purposes.
+ *
+ * @HE_FRAG_DISABLE: no support for dynamic fragmentation
+ * @HE_FRAG_LEVEL1: support for dynamic fragments that are
+ * 	contained within an MPDU or S-MPDU, no support for dynamic fragments
+ * 	within an A-MPDU that is not an S-MPDU.
+ * @HE_FRAG_LEVEL2: support for dynamic fragments that are
+ * 	contained within an MPDU or S-MPDU and support for up to one dynamic
+ * 	fragment for each MSDU, each A-MSDU if supported by the recipient, and
+ * 	each MMPDU within an A-MPDU or multi-TID A-MPDU that is not an
+ * 	MPDU or S-MPDU.
+ * @HE_FRAG_LEVEL3: support for dynamic fragments that are
+ * 	contained within an MPDU or S-MPDU and support for multiple dynamic
+ * 	fragments for each MSDU and for each A-MSDU if supported by the
+ * 	recipient within an A-MPDU or multi-TID AMPDU and up to one dynamic
+ * 	fragment for each MMPDU in a multi-TID A-MPDU that is not an S-MPDU.
+ */
+enum he_fragmentation_val {
+	HE_FRAG_DISABLE,
+	HE_FRAG_LEVEL1,
+	HE_FRAG_LEVEL2,
+	HE_FRAG_LEVEL3,
+};
+
+/**
+ * enum he_mcs_config - HE MCS support configuration
+ *
+ * Configures the HE Tx/Rx MCS map in HE capability IE for given bandwidth.
+ * These values are used in driver to configure the HE MCS map to advertise
+ * Tx/Rx MCS map in HE capability and these values are applied for all the
+ * streams supported by the device. To configure MCS for different bandwidths,
+ * vendor command needs to be sent using this attribute with appropriate value.
+ * For example, to configure HE_80_MCS_0_7, send vendor command using HE MCS
+ * attribute with HE_80_MCS0_7. And to configure HE MCS for HE_160_MCS0_11
+ * send this command using HE MCS config attribute with value HE_160_MCS0_11.
+ * These values are used to configure testbed device to allow the advertised
+ * hardware capabilities to be downgraded for testing purposes. The enum values
+ * are defined such that BIT[1:0] indicates the MCS map value. Values 3,7 and
+ * 11 are not used as BIT[1:0] value is 3 which is used to disable MCS map.
+ * These values are validated in the driver before setting the MCS map and
+ * driver returns error if the input is other than these enum values.
+ *
+ * @HE_80_MCS0_7: support for HE 80/40/20 MHz MCS 0 to 7
+ * @HE_80_MCS0_9: support for HE 80/40/20 MHz MCS 0 to 9
+ * @HE_80_MCS0_11: support for HE 80/40/20 MHz MCS 0 to 11
+ * @HE_160_MCS0_7: support for HE 160 MHz MCS 0 to 7
+ * @HE_160_MCS0_9: support for HE 160 MHz MCS 0 to 9
+ * @HE_160_MCS0_11: support for HE 160 MHz MCS 0 to 11
+ * @HE_80P80_MCS0_7: support for HE 80p80 MHz MCS 0 to 7
+ * @HE_80P80_MCS0_9: support for HE 80p80 MHz MCS 0 to 9
+ * @HE_80P80_MCS0_11: support for HE 80p80 MHz MCS 0 to 11
+ */
+enum he_mcs_config {
+	HE_80_MCS0_7 = 0,
+	HE_80_MCS0_9 = 1,
+	HE_80_MCS0_11 = 2,
+	HE_160_MCS0_7 = 4,
+	HE_160_MCS0_9 = 5,
+	HE_160_MCS0_11 = 6,
+	HE_80P80_MCS0_7 = 8,
+	HE_80P80_MCS0_9 = 9,
+	HE_80P80_MCS0_11 = 10,
+};
+
+/* Attributes for data used by
+ * QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
+ */
+enum qca_wlan_vendor_attr_wifi_test_config {
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_INVALID = 0,
+	/* 8-bit unsigned value to configure the driver to enable/disable
+	 * WMM feature. This attribute is used to configure testbed device.
+	 * 1-enable, 0-disable
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_WMM_ENABLE = 1,
+
+	/* 8-bit unsigned value to configure the driver to accept/reject
+	 * the addba request from peer. This attribute is used to configure
+	 * the testbed device.
+	 * 1-accept addba, 0-reject addba
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_ACCEPT_ADDBA_REQ = 2,
+
+	/* 8-bit unsigned value to configure the driver to send or not to
+	 * send the addba request to peer.
+	 * This attribute is used to configure the testbed device.
+	 * 1-send addba, 0-do not send addba
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_SEND_ADDBA_REQ = 3,
+
+	/* 8-bit unsigned value to indicate the HE fragmentation support.
+	 * Uses enum he_fragmentation_val values.
+	 * This attribute is used to configure the testbed device to
+	 * allow the advertised hardware capabilities to be downgraded
+	 * for testing purposes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_FRAGMENTATION = 4,
+
+	/* 8-bit unsigned value to indicate the HE MCS support.
+	 * Uses enum he_mcs_config values.
+	 * This attribute is used to configure the testbed device to
+	 * allow the advertised hardware capabilities to be downgraded
+	 * for testing purposes.
+	 */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_HE_MCS = 5,
+
+	/* keep last */
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST,
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_MAX =
+	QCA_WLAN_VENDOR_ATTR_WIFI_TEST_CONFIG_AFTER_LAST - 1,
+};
+
 #endif /* QCA_VENDOR_H */