hostapd_cli: Add missing command help descriptions

Some commands are missing help description making them not show up in
the list of supported commands. Add command help description for all
missing commands.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>

hostapd/hostapd_cli.c

@@ -1343,8 +1343,10 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	  "= pings hostapd" },
 	{ "mib", hostapd_cli_cmd_mib, NULL,
 	  "= get MIB variables (dot1x, dot11, radius)" },
-	{ "relog", hostapd_cli_cmd_relog, NULL, NULL },
-	{ "status", hostapd_cli_cmd_status, NULL, NULL },
+	{ "relog", hostapd_cli_cmd_relog, NULL,
+	  "= reload/truncate debug log output file" },
+	{ "status", hostapd_cli_cmd_status, NULL,
+	  "= show interface status info" },
 	{ "sta", hostapd_cli_cmd_sta, hostapd_complete_sta,
 	  "<addr> = get MIB variables for one station" },
 	{ "all_sta", hostapd_cli_cmd_all_sta, NULL,
@@ -1393,9 +1395,12 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	{ "wps_get_status", hostapd_cli_cmd_wps_get_status, NULL,
 	  "= show current WPS status" },
 #endif /* CONFIG_WPS */
-	{ "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent, NULL, NULL },
-	{ "ess_disassoc", hostapd_cli_cmd_ess_disassoc, NULL, NULL },
-	{ "bss_tm_req", hostapd_cli_cmd_bss_tm_req, NULL, NULL },
+	{ "disassoc_imminent", hostapd_cli_cmd_disassoc_imminent, NULL,
+	  "= send Disassociation Imminent notification" },
+	{ "ess_disassoc", hostapd_cli_cmd_ess_disassoc, NULL,
+	  "= send ESS Dissassociation Imminent notification" },
+	{ "bss_tm_req", hostapd_cli_cmd_bss_tm_req, NULL,
+	  "= send BSS Transition Management Request" },
 	{ "get_config", hostapd_cli_cmd_get_config, NULL,
 	  "= show current configuration" },
 	{ "help", hostapd_cli_cmd_help, hostapd_cli_complete_help,
@@ -1403,35 +1408,63 @@ static const struct hostapd_cli_cmd hostapd_cli_commands[] = {
 	{ "interface", hostapd_cli_cmd_interface, hostapd_complete_interface,
 	  "[ifname] = show interfaces/select interface" },
 #ifdef CONFIG_FST
-	{ "fst", hostapd_cli_cmd_fst, NULL, NULL },
+	{ "fst", hostapd_cli_cmd_fst, NULL,
+	  "<params...> = send FST-MANAGER control interface command" },
 #endif /* CONFIG_FST */
-	{ "raw", hostapd_cli_cmd_raw, NULL, NULL },
+	{ "raw", hostapd_cli_cmd_raw, NULL,
+	  "<params..> = send unprocessed command" },
 	{ "level", hostapd_cli_cmd_level, NULL,
 	  "<debug level> = change debug level" },
 	{ "license", hostapd_cli_cmd_license, NULL,
 	  "= show full hostapd_cli license" },
 	{ "quit", hostapd_cli_cmd_quit, NULL,
 	  "= exit hostapd_cli" },
-	{ "set", hostapd_cli_cmd_set, NULL, NULL },
-	{ "get", hostapd_cli_cmd_get, NULL, NULL },
-	{ "set_qos_map_set", hostapd_cli_cmd_set_qos_map_set, NULL, NULL },
-	{ "send_qos_map_conf", hostapd_cli_cmd_send_qos_map_conf, NULL, NULL },
-	{ "chan_switch", hostapd_cli_cmd_chan_switch, NULL, NULL },
-	{ "hs20_wnm_notif", hostapd_cli_cmd_hs20_wnm_notif, NULL, NULL },
-	{ "hs20_deauth_req", hostapd_cli_cmd_hs20_deauth_req, NULL, NULL },
-	{ "vendor", hostapd_cli_cmd_vendor, NULL, NULL },
-	{ "enable", hostapd_cli_cmd_enable, NULL, NULL },
-	{ "reload", hostapd_cli_cmd_reload, NULL, NULL },
-	{ "disable", hostapd_cli_cmd_disable, NULL, NULL },
-	{ "erp_flush", hostapd_cli_cmd_erp_flush, NULL, NULL },
-	{ "log_level", hostapd_cli_cmd_log_level, NULL, NULL },
-	{ "pmksa", hostapd_cli_cmd_pmksa, NULL, NULL },
-	{ "pmksa_flush", hostapd_cli_cmd_pmksa_flush, NULL, NULL },
-	{ "set_neighbor", hostapd_cli_cmd_set_neighbor, NULL, NULL },
-	{ "remove_neighbor", hostapd_cli_cmd_remove_neighbor, NULL, NULL },
-	{ "req_lci", hostapd_cli_cmd_req_lci, NULL, NULL },
-	{ "req_range", hostapd_cli_cmd_req_range, NULL, NULL },
-	{ "driver_flags", hostapd_cli_cmd_driver_flags, NULL, NULL },
+	{ "set", hostapd_cli_cmd_set, NULL,
+	  "<name> <value> = set runtime variables" },
+	{ "get", hostapd_cli_cmd_get, NULL,
+	  "<name> = get runtime info" },
+	{ "set_qos_map_set", hostapd_cli_cmd_set_qos_map_set, NULL,
+	  "<arg,arg,...> = set QoS Map set element" },
+	{ "send_qos_map_conf", hostapd_cli_cmd_send_qos_map_conf, NULL,
+	  "<addr> = send QoS Map Configure frame" },
+	{ "chan_switch", hostapd_cli_cmd_chan_switch, NULL,
+	  "<cs_count> <freq> [sec_channel_offset=] [center_freq1=]\n"
+	  "  [center_freq2=] [bandwidth=] [blocktx] [ht|vht]\n"
+	  "  = initiate channel switch announcement" },
+	{ "hs20_wnm_notif", hostapd_cli_cmd_hs20_wnm_notif, NULL,
+	  "<addr> <url>\n"
+	  "  = send WNM-Notification Subscription Remediation Request" },
+	{ "hs20_deauth_req", hostapd_cli_cmd_hs20_deauth_req, NULL,
+	  "<addr> <code (0/1)> <Re-auth-Delay(sec)> [url]\n"
+	  "  = send WNM-Notification imminent deauthentication indication" },
+	{ "vendor", hostapd_cli_cmd_vendor, NULL,
+	  "<vendor id> <sub command id> [<hex formatted data>]\n"
+	  "  = send vendor driver command" },
+	{ "enable", hostapd_cli_cmd_enable, NULL,
+	  "= enable hostapd on current interface" },
+	{ "reload", hostapd_cli_cmd_reload, NULL,
+	  "= reload configuration for current interface" },
+	{ "disable", hostapd_cli_cmd_disable, NULL,
+	  "= disable hostapd on current interface" },
+	{ "erp_flush", hostapd_cli_cmd_erp_flush, NULL,
+	  "= drop all ERP keys"},
+	{ "log_level", hostapd_cli_cmd_log_level, NULL,
+	  "[level] = show/change log verbosity level" },
+	{ "pmksa", hostapd_cli_cmd_pmksa, NULL,
+	  " = show PMKSA cache entries" },
+	{ "pmksa_flush", hostapd_cli_cmd_pmksa_flush, NULL,
+	  " = flush PMKSA cache" },
+	{ "set_neighbor", hostapd_cli_cmd_set_neighbor, NULL,
+	  "<addr> <ssid=> <nr=> [lci=] [civic=] [stat]\n"
+	  "  = add AP to neighbor database" },
+	{ "remove_neighbor", hostapd_cli_cmd_remove_neighbor, NULL,
+	  "<addr> <ssid=> = remove AP from neighbor database" },
+	{ "req_lci", hostapd_cli_cmd_req_lci, NULL,
+	  "<addr> = send LCI request to a station"},
+	{ "req_range", hostapd_cli_cmd_req_range, NULL,
+	  " = send FTM range request"},
+	{ "driver_flags", hostapd_cli_cmd_driver_flags, NULL,
+	  " = show supported driver flags"},
 	{ NULL, NULL, NULL, NULL }
 };