wpa_cli: Add missing parameters for "set" command completion routine

Some config parameters were missing in the "set" command completion
routine. Add missing parameters and while at it put the parameters
under compiler switches so only valid ones are shown.

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>

wpa_supplicant/wpa_cli.c

@@ -608,35 +608,57 @@ static char ** wpa_cli_complete_set(const char *str, int pos)
 		"uapsd", "ps", "wifi_display", "bssid_filter", "disallow_aps",
 		"no_keep_alive",
 		/* global configuration parameters */
-		"eapol_version", "ap_scan", "disable_scan_offload",
-		"fast_reauth", "opensc_engine_path", "pkcs11_engine_path",
-		"pkcs11_module_path", "openssl_ciphers",
-		"pcsc_reader", "pcsc_pin",
-		"driver_param", "dot11RSNAConfigPMKLifetime",
+#ifdef CONFIG_CTRL_IFACE
+		"ctrl_interface", "no_ctrl_interface", "ctrl_interface_group",
+#endif /* CONFIG_CTRL_IFACE */
+		"eapol_version", "ap_scan", "bgscan",
+#ifdef CONFIG_MESH
+		"user_mpm", "max_peer_links", "mesh_max_inactivity",
+#endif /* CONFIG_MESH */
+		"disable_scan_offload", "fast_reauth", "opensc_engine_path",
+		"pkcs11_engine_path", "pkcs11_module_path", "openssl_ciphers",
+		"pcsc_reader", "pcsc_pin", "external_sim", "driver_param",
+		"dot11RSNAConfigPMKLifetime",
 		"dot11RSNAConfigPMKReauthThreshold",
 		"dot11RSNAConfigSATimeout",
-		"update_config", "load_dynamic_eap", "uuid", "device_name",
-		"manufacturer", "model_name", "model_number", "serial_number",
-		"device_type", "os_version", "config_methods",
-		"wps_cred_processing", "wps_vendor_ext_m1", "sec_device_type",
+#ifndef CONFIG_NO_CONFIG_WRITE
+		"update_config",
+#endif /* CONFIG_NO_CONFIG_WRITE */
+		"load_dynamic_eap",
+#ifdef CONFIG_WPS
+		"uuid", "device_name", "manufacturer", "model_name",
+		"model_number", "serial_number", "device_type", "os_version",
+		"config_methods", "wps_cred_processing", "wps_vendor_ext_m1",
+#endif /* CONFIG_WPS */
+#ifdef CONFIG_P2P
+		"sec_device_type",
 		"p2p_listen_reg_class", "p2p_listen_channel",
-		"p2p_oper_reg_class", "p2p_oper_channel",
-		"p2p_go_intent", "p2p_ssid_postfix", "persistent_reconnect",
-		"p2p_intra_bss", "p2p_group_idle", "p2p_pref_chan",
-		"p2p_no_go_freq",
-		"p2p_go_ht40", "p2p_disabled", "p2p_no_group_iface",
-		"p2p_go_vht",
-		"p2p_ignore_shared_freq", "country", "bss_max_count",
-		"bss_expiration_age", "bss_expiration_scan_count",
-		"filter_ssids", "filter_rssi", "max_num_sta",
-		"disassoc_low_ack", "hs20", "interworking", "hessid",
-		"access_network_type", "pbc_in_m1", "autoscan",
-		"wps_nfc_dev_pw_id", "wps_nfc_dh_pubkey", "wps_nfc_dh_privkey",
-		"wps_nfc_dev_pw", "ext_password_backend",
+		"p2p_oper_reg_class", "p2p_oper_channel", "p2p_go_intent",
+		"p2p_ssid_postfix", "persistent_reconnect", "p2p_intra_bss",
+		"p2p_group_idle", "p2p_passphrase_len", "p2p_pref_chan",
+		"p2p_no_go_freq", "p2p_add_cli_chan",
+		"p2p_optimize_listen_chan", "p2p_go_ht40", "p2p_go_vht",
+		"p2p_disabled", "p2p_go_ctwindow", "p2p_no_group_iface",
+		"p2p_ignore_shared_freq", "ip_addr_go", "ip_addr_mask",
+		"ip_addr_start", "ip_addr_end",
+#endif /* CONFIG_P2P */
+		"country", "bss_max_count", "bss_expiration_age",
+		"bss_expiration_scan_count", "filter_ssids", "filter_rssi",
+		"max_num_sta", "disassoc_low_ack",
+#ifdef CONFIG_HS20
+		"hs20",
+#endif /* CONFIG_HS20 */
+		"interworking", "hessid", "access_network_type", "pbc_in_m1",
+		"autoscan", "wps_nfc_dev_pw_id", "wps_nfc_dh_pubkey",
+		"wps_nfc_dh_privkey", "wps_nfc_dev_pw", "ext_password_backend",
 		"p2p_go_max_inactivity", "auto_interworking", "okc", "pmf",
-		"sae_groups", "dtim_period", "beacon_int", "ap_vendor_elements",
-		"ignore_old_scan_res", "freq_list", "external_sim",
-		"tdls_external_control", "p2p_search_delay"
+		"sae_groups", "dtim_period", "beacon_int",
+		"ap_vendor_elements", "ignore_old_scan_res", "freq_list",
+		"scan_cur_freq", "sched_scan_interval",
+		"tdls_external_control", "osu_dir", "wowlan_triggers",
+		"p2p_search_delay", "mac_addr", "rand_addr_lifetime",
+		"preassoc_mac_addr", "key_mgmt_offload", "passive_scan",
+		"reassoc_same_bss_optim"
 	};
 	int i, num_fields = ARRAY_SIZE(fields);