Sync with mac80211-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2018-01-31.

Signed-off-by: Jouni Malinen <j@w1.fi>

src/drivers/nl80211_copy.h

@@ -172,6 +172,29 @@
  * Multiple such rules can be created.
  */
 
+/**
+ * DOC: WPA/WPA2 EAPOL handshake offload
+ *
+ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
+ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
+ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
+ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
+ * this offload may reject the %NL80211_CMD_CONNECT when no preshared
+ * key material is provided, for example when that driver does not
+ * support setting the temporal keys through %CMD_NEW_KEY.
+ *
+ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
+ * set by drivers indicating offload support of the PTK/GTK EAPOL
+ * handshakes during 802.1X authentication. In order to use the offload
+ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
+ * attribute flag. Drivers supporting this offload may reject the
+ * %NL80211_CMD_CONNECT when the attribute flag is not present.
+ *
+ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
+ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
+ * %NL80211_ATTR_PMKR0_NAME must be provided.
+ */
+
 /**
  * DOC: FILS shared key authentication offload
  *
@@ -387,7 +410,9 @@
  *	are used.  Extra IEs can also be passed from the userspace by
  *	using the %NL80211_ATTR_IE attribute.  The first cycle of the
  *	scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
- *	is supplied.
+ *	is supplied. If the device supports multiple concurrent scheduled
+ *	scans, it will allow such when the caller provides the flag attribute
+ *	%NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
  * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
  *	scheduled scan is not running. The caller may assume that as soon
  *	as the call returns, it is safe to start a new scheduled scan again.
@@ -544,8 +569,14 @@
  *	authentication/association or not receiving a response from the AP.
  *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
  *	well to remain backwards compatible.
- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
- *	sent as an event when the card/driver roamed by itself.
+ *	When establishing a security association, drivers that support 4 way
+ *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
+ *	the 4 way handshake is completed successfully.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+ *	When a security association was established with the new AP (e.g. if
+ *	the FT protocol was used for roaming or the driver completed the 4 way
+ *	handshake), this event should be followed by an
+ *	%NL80211_CMD_PORT_AUTHORIZED event.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *	userspace that a connection was dropped by the AP or due to other
  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -945,6 +976,48 @@
  *	does not result in a change for the current association. Currently,
  *	only the %NL80211_ATTR_IE data is used and updated with this command.
  *
+ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
+ *	for the given authenticator address (specified with &NL80211_ATTR_MAC).
+ *	When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
+ *	PMK-R0, otherwise it specifies the PMK.
+ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
+ *	configured PMK for the authenticator address identified by
+ *	&NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ *	handshake was completed successfully by the driver. The BSSID is
+ *	specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ *	offload should send this event after indicating 802.11 association with
+ *	&NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ *	&NL80211_CMD_DISCONNECT should be indicated instead.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
+ *
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
+ *	drivers that do not define separate commands for authentication and
+ *	association, but rely on user space for the authentication to happen.
+ *	This interface acts both as the event request (driver to user space)
+ *	to trigger the authentication and command response (userspace to
+ *	driver) to indicate the authentication status.
+ *
+ *	User space uses the %NL80211_CMD_CONNECT command to the host driver to
+ *	trigger a connection. The host driver selects a BSS and further uses
+ *	this interface to offload only the authentication part to the user
+ *	space. Authentication frames are passed between the driver and user
+ *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds
+ *	further with the association after getting successful authentication
+ *	status. User space indicates the authentication status through
+ *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
+ *	command interface.
+ *
+ *	Host driver reports this status on an authentication failure to the
+ *	user space through the connect result as the user space would have
+ *	initiated the connection through the connect request.
+ *
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
+ *	ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
+ *	&NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
+ *	address(specified in &NL80211_ATTR_MAC).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1144,6 +1217,17 @@ enum nl80211_commands {
 
 	NL80211_CMD_UPDATE_CONNECT_PARAMS,
 
+	NL80211_CMD_SET_PMK,
+	NL80211_CMD_DEL_PMK,
+
+	NL80211_CMD_PORT_AUTHORIZED,
+
+	NL80211_CMD_RELOAD_REGDB,
+
+	NL80211_CMD_EXTERNAL_AUTH,
+
+	NL80211_CMD_STA_OPMODE_CHANGED,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1366,8 +1450,12 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
+ *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ *	must have decided whether to use management frame protection or not.
+ *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ *	let the driver (or the firmware) decide whether to use MFP or not.
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
@@ -1868,11 +1956,10 @@ enum nl80211_commands {
  *	that configured the indoor setting, and the indoor operation would be
  *	cleared when the socket is closed.
  *	If set during NAN interface creation, the interface will be destroyed
- *	if the socket is closed just like any other interface. Moreover, only
- *	the netlink socket that created the interface will be allowed to add
- *	and remove functions. NAN notifications will be sent in unicast to that
- *	socket. Without this attribute, any socket can add functions and the
- *	notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
+ *	if the socket is closed just like any other interface. Moreover, NAN
+ *	notifications will be sent in unicast to that socket. Without this
+ *	attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
+ *	multicast group.
  *	If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
  *	station will deauthenticate when the socket is closed.
  *
@@ -2078,8 +2165,36 @@ enum nl80211_commands {
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
- * @NL80211_ATTR_PMK: PMK for the PMKSA identified by %NL80211_ATTR_PMKID.
- *	This is used with @NL80211_CMD_SET_PMKSA.
+ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
+ *	%NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
+ *	For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
+ *	handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
+ *	used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
+ *	specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
+ *
+ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
+ *	indicate that it supports multiple active scheduled scan requests.
+ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
+ *	scan request that may be active for the device (u32).
+ *
+ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
+ *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
+ *	wants to use the supported offload of the 4-way handshake.
+ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
+ *
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
+ *     authentication operation (u32 attribute with an
+ *     &enum nl80211_external_auth_action value). This is used with the
+ *     &NL80211_CMD_EXTERNAL_AUTH request event.
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
+ *     space supports external authentication. This attribute shall be used
+ *     only with %NL80211_CMD_CONNECT request. The driver may offload
+ *     authentication processing to user space if this capability is indicated
+ *     in NL80211_CMD_CONNECT requests from the user space.
+ *
+ * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
+ *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2500,6 +2615,18 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_PMK,
 
+	NL80211_ATTR_SCHED_SCAN_MULTI,
+	NL80211_ATTR_SCHED_SCAN_MAX_REQS,
+
+	NL80211_ATTR_WANT_1X_4WAY_HS,
+	NL80211_ATTR_PMKR0_NAME,
+	NL80211_ATTR_PORT_AUTHORIZED,
+
+	NL80211_ATTR_EXTERNAL_AUTH_ACTION,
+	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
+
+	NL80211_ATTR_NSS,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3184,6 +3311,7 @@ enum nl80211_reg_rule_attr {
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
  *	only report BSS with matching SSID.
+ *	(This cannot be used together with BSSID.)
  * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
  *	BSS in scan results. Filtering is turned off if not specified. Note that
  *	if this attribute is in a match set of its own, then it is treated as
@@ -3199,6 +3327,8 @@ enum nl80211_reg_rule_attr {
  *	BSS-es in the specified band is to be adjusted before doing
  *	RSSI-based BSS selection. The attribute value is a packed structure
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
+ *	(this cannot be used together with SSID).
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3210,6 +3340,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
+	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -3779,6 +3910,9 @@ enum nl80211_bss_scan_width {
  *	@NL80211_BSS_PARENT_BSSID. (u64).
  * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF
  *	is set.
+ * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
+ *	Contains a nested array of signal strength attributes (u8, dBm),
+ *	using the nesting index as the antenna number.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -3802,6 +3936,7 @@ enum nl80211_bss {
 	NL80211_BSS_PAD,
 	NL80211_BSS_PARENT_TSF,
 	NL80211_BSS_PARENT_BSSID,
+	NL80211_BSS_CHAIN_SIGNAL,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -3878,10 +4013,12 @@ enum nl80211_key_type {
  * enum nl80211_mfp - Management frame protection state
  * @NL80211_MFP_NO: Management frame protection not used
  * @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
  */
 enum nl80211_mfp {
 	NL80211_MFP_NO,
 	NL80211_MFP_REQUIRED,
+	NL80211_MFP_OPTIONAL,
 };
 
 enum nl80211_wpa_versions {
@@ -4838,6 +4975,27 @@ enum nl80211_feature_flags {
  *	RSSI threshold values to monitor rather than exactly one threshold.
  * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
  *	authentication with %NL80211_CMD_CONNECT.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
+ *	handshake with PSK in station mode (PSK is passed as part of the connect
+ *	and associate commands), doing it in the host might not be supported.
+ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
+ *	handshake with 802.1X in station mode (will pass EAP frames to the host
+ *	and accept the set_pmk/del_pmk commands), doing it in the host might not
+ *	be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ *	the max channel attribute in the FILS request params IE with the
+ *	actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ *	response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ *	the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ *	probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ *	value in %NL80211_ATTR_USE_MFP.
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4858,6 +5016,16 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
 	NL80211_EXT_FEATURE_CQM_RSSI_LIST,
 	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
+	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+	NL80211_EXT_FEATURE_MFP_OPTIONAL,
+	NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
+	NL80211_EXT_FEATURE_LOW_POWER_SCAN,
+	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4918,6 +5086,10 @@ enum nl80211_timeout_reason {
  * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
  * requests.
  *
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
+ * one of them can be used in the request.
+ *
  * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
  * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
  * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
@@ -4934,12 +5106,44 @@ enum nl80211_timeout_reason {
  *	locally administered 1, multicast 0) is assumed.
  *	This flag must not be requested when the feature isn't supported, check
  *	the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ *	request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ *	rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ *	only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ *	and suppression (if it has received a broadcast Probe Response frame,
+ *	Beacon frame or FILS Discovery frame from an AP that the STA considers
+ *	a suitable candidate for (re-)association - suitable in terms of
+ *	SSID and/or RSSI.
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
+ *	accomplish the scan. Thus, this flag intends the driver to perform the
+ *	scan request with lesser span/duration. It is specific to the driver
+ *	implementations on how this is accomplished. Scan accuracy may get
+ *	impacted with this flag.
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
+ *	optimal possible power. Drivers can resort to their specific means to
+ *	optimize the power. Scan accuracy may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
+ *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
+ *	possible scan results. This flag hints the driver to use the best
+ *	possible scan configuration to improve the accuracy in scanning.
+ *	Latency and power use may get impacted with this flag.
  */
 enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
-	NL80211_SCAN_FLAG_AP				= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
+	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
+	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
+	NL80211_SCAN_FLAG_AP					= 1<<2,
+	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
+	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
+	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
+	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
+	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
+	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 };
 
 /**
@@ -5339,4 +5543,15 @@ enum nl80211_nan_match_attributes {
 	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
 };
 
+/**
+ * nl80211_external_auth_action - Action to perform with external
+ *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
+ */
+enum nl80211_external_auth_action {
+	NL80211_EXTERNAL_AUTH_START,
+	NL80211_EXTERNAL_AUTH_ABORT,
+};
+
 #endif /* __LINUX_NL80211_H */