tests: Mark 525 tests as remote compatible

After successfully passing the 525 tests on a remote setup mark the
tests as remote compatible.

Signed-off-by: Jonathan Afek <jonathanx.afek@intel.com>

tests/hwsim/test_ap_ciphers.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -63,11 +64,13 @@ def check_group_mgmt_cipher(dev, ap, cipher):
     if res != group_mgmt:
         raise Exception("Unexpected group mgmt cipher: " + res)
 
+@remote_compatible
 def test_ap_cipher_tkip(dev, apdev):
     """WPA2-PSK/TKIP connection"""
     skip_with_fips(dev[0])
     check_cipher(dev[0], apdev[0], "TKIP")
 
+@remote_compatible
 def test_ap_cipher_tkip_countermeasures_ap(dev, apdev):
     """WPA-PSK/TKIP countermeasures (detected by AP)"""
     skip_with_fips(dev[0])
@@ -102,6 +105,7 @@ def test_ap_cipher_tkip_countermeasures_ap(dev, apdev):
     if ev is not None:
         raise Exception("Unexpected connection during TKIP countermeasures")
 
+@remote_compatible
 def test_ap_cipher_tkip_countermeasures_sta(dev, apdev):
     """WPA-PSK/TKIP countermeasures (detected by STA)"""
     skip_with_fips(dev[0])
@@ -136,6 +140,7 @@ def test_ap_cipher_tkip_countermeasures_sta(dev, apdev):
     if ev is not None:
         raise Exception("Unexpected connection during TKIP countermeasures")
 
+@remote_compatible
 def test_ap_cipher_ccmp(dev, apdev):
     """WPA2-PSK/CCMP connection"""
     check_cipher(dev[0], apdev[0], "CCMP")
@@ -152,6 +157,7 @@ def test_ap_cipher_gcmp_256(dev, apdev):
     """WPA2-PSK/GCMP-256 connection"""
     check_cipher(dev[0], apdev[0], "GCMP-256")
 
+@remote_compatible
 def test_ap_cipher_mixed_wpa_wpa2(dev, apdev):
     """WPA2-PSK/CCMP/ and WPA-PSK/TKIP mixed configuration"""
     skip_with_fips(dev[0])
@@ -194,6 +200,7 @@ def test_ap_cipher_mixed_wpa_wpa2(dev, apdev):
     hwsim_utils.test_connectivity(dev[1], hapd)
     hwsim_utils.test_connectivity(dev[0], dev[1])
 
+@remote_compatible
 def test_ap_cipher_bip(dev, apdev):
     """WPA2-PSK with BIP"""
     check_group_mgmt_cipher(dev[0], apdev[0], "AES-128-CMAC")

tests/hwsim/test_ap_config.py

@@ -4,8 +4,10 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import hostapd
 
+@remote_compatible
 def test_ap_config_errors(dev, apdev):
     """Various hostapd configuration errors"""
 

tests/hwsim/test_ap_csa.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -42,6 +43,7 @@ def csa_supported(dev):
     if (int(res['capa.flags'], 0) & 0x80000000) == 0:
         raise HwsimSkip("CSA not supported")
 
+@remote_compatible
 def test_ap_csa_1_switch(dev, apdev):
     """AP Channel Switch, one switch"""
     csa_supported(dev[0])
@@ -52,6 +54,7 @@ def test_ap_csa_1_switch(dev, apdev):
     wait_channel_switch(dev[0], 2462)
     hwsim_utils.test_connectivity(dev[0], ap)
 
+@remote_compatible
 def test_ap_csa_2_switches(dev, apdev):
     """AP Channel Switch, two switches"""
     csa_supported(dev[0])
@@ -65,6 +68,7 @@ def test_ap_csa_2_switches(dev, apdev):
     wait_channel_switch(dev[0], 2412)
     hwsim_utils.test_connectivity(dev[0], ap)
 
+@remote_compatible
 def test_ap_csa_1_switch_count_0(dev, apdev):
     """AP Channel Switch, one switch with count 0"""
     csa_supported(dev[0])
@@ -75,6 +79,7 @@ def test_ap_csa_1_switch_count_0(dev, apdev):
     # this does not result in CSA currently, so do not bother checking
     # connectivity
 
+@remote_compatible
 def test_ap_csa_2_switches_count_0(dev, apdev):
     """AP Channel Switch, two switches with count 0"""
     csa_supported(dev[0])
@@ -88,6 +93,7 @@ def test_ap_csa_2_switches_count_0(dev, apdev):
     # this does not result in CSA currently, so do not bother checking
     # connectivity
 
+@remote_compatible
 def test_ap_csa_1_switch_count_1(dev, apdev):
     """AP Channel Switch, one switch with count 1"""
     csa_supported(dev[0])
@@ -98,6 +104,7 @@ def test_ap_csa_1_switch_count_1(dev, apdev):
     # this does not result in CSA currently, so do not bother checking
     # connectivity
 
+@remote_compatible
 def test_ap_csa_2_switches_count_1(dev, apdev):
     """AP Channel Switch, two switches with count 1"""
     csa_supported(dev[0])
@@ -111,6 +118,7 @@ def test_ap_csa_2_switches_count_1(dev, apdev):
     # this does not result in CSA currently, so do not bother checking
     # connectivity
 
+@remote_compatible
 def test_ap_csa_1_switch_count_2(dev, apdev):
     """AP Channel Switch, one switch with count 2"""
     csa_supported(dev[0])
@@ -121,6 +129,7 @@ def test_ap_csa_1_switch_count_2(dev, apdev):
     wait_channel_switch(dev[0], 2462)
     hwsim_utils.test_connectivity(dev[0], ap)
 
+@remote_compatible
 def test_ap_csa_ecsa_only(dev, apdev):
     """AP Channel Switch, one switch with only ECSA IE"""
     csa_supported(dev[0])
@@ -131,6 +140,7 @@ def test_ap_csa_ecsa_only(dev, apdev):
     wait_channel_switch(dev[0], 2462)
     hwsim_utils.test_connectivity(dev[0], ap)
 
+@remote_compatible
 def test_ap_csa_invalid(dev, apdev):
     """AP Channel Switch - invalid channel"""
     csa_supported(dev[0])

tests/hwsim/test_ap_dynamic.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import subprocess
 import logging
@@ -15,6 +16,7 @@ import hostapd
 from utils import alloc_fail
 from test_ap_acs import force_prev_ap_on_24g
 
+@remote_compatible
 def test_ap_change_ssid(dev, apdev):
     """Dynamic SSID change with hostapd and WPA2-PSK"""
     params = hostapd.wpa2_params(ssid="test-wpa2-psk-start",
@@ -210,6 +212,7 @@ def invalid_ap(ap):
         raise Exception("ENABLE command succeeded unexpectedly")
     return hapd
 
+@remote_compatible
 def test_ap_invalid_config(dev, apdev):
     """Try to start AP with invalid configuration and fix configuration"""
     hapd = invalid_ap(apdev[0])
@@ -219,6 +222,7 @@ def test_ap_invalid_config(dev, apdev):
     hapd.enable()
     dev[0].connect("invalid-config", key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ap_invalid_config2(dev, apdev):
     """Try to start AP with invalid configuration and remove interface"""
     hapd = invalid_ap(apdev[0])
@@ -259,6 +263,7 @@ def test_ap_remove_during_acs3(dev, apdev):
     hapd.enable()
     hostapd.remove_bss(apdev[0], ifname2)
 
+@remote_compatible
 def test_ap_remove_during_ht_coex_scan(dev, apdev):
     """Remove interface during HT co-ex scan"""
     params = hostapd.wpa2_params(ssid="test-ht-remove", passphrase="12345678")
@@ -294,6 +299,7 @@ def test_ap_remove_during_ht_coex_scan3(dev, apdev):
     hapd.enable()
     hostapd.remove_bss(apdev[0], ifname2)
 
+@remote_compatible
 def test_ap_enable_disable_reenable(dev, apdev):
     """Enable, disable, re-enable AP"""
     hapd = hostapd.add_ap(apdev[0], {}, no_enable=True)
@@ -435,6 +441,7 @@ def test_ap_multi_bss(dev, apdev):
     if 'rx_packets' not in sta1 or int(sta1['rx_packets']) < 1:
         raise Exception("sta1 did not report receiving packets")
 
+@remote_compatible
 def test_ap_add_with_driver(dev, apdev):
     """Add hostapd interface with driver specified"""
     ifname = apdev[0]['ifname']

tests/hwsim/test_ap_ft.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import os
 import time
@@ -230,6 +231,7 @@ def test_ap_ft_over_ds_many(dev, apdev):
     run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
               roams=50)
 
+@remote_compatible
 def test_ap_ft_over_ds_unknown_target(dev, apdev):
     """WPA2-PSK-FT AP"""
     ssid = "test-ft"
@@ -242,6 +244,7 @@ def test_ap_ft_over_ds_unknown_target(dev, apdev):
                    scan_freq="2412")
     dev[0].roam_over_ds("02:11:22:33:44:55", fail_test=True)
 
+@remote_compatible
 def test_ap_ft_over_ds_unexpected(dev, apdev):
     """WPA2-PSK-FT AP over DS and unexpected response"""
     ssid = "test-ft"
@@ -473,6 +476,7 @@ def test_ap_ft_eap_pull(dev, apdev):
 
     run_roams(dev[0], apdev, hapd, hapd1, ssid, passphrase, eap=True)
 
+@remote_compatible
 def test_ap_ft_mismatching_rrb_key_push(dev, apdev):
     """WPA2-PSK-FT AP over DS with mismatching RRB key (push)"""
     ssid = "test-ft"
@@ -488,6 +492,7 @@ def test_ap_ft_mismatching_rrb_key_push(dev, apdev):
     run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
               fail_test=True)
 
+@remote_compatible
 def test_ap_ft_mismatching_rrb_key_pull(dev, apdev):
     """WPA2-PSK-FT AP over DS with mismatching RRB key (pull)"""
     ssid = "test-ft"
@@ -503,6 +508,7 @@ def test_ap_ft_mismatching_rrb_key_pull(dev, apdev):
     run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
               fail_test=True)
 
+@remote_compatible
 def test_ap_ft_mismatching_r0kh_id_pull(dev, apdev):
     """WPA2-PSK-FT AP over DS with mismatching R0KH-ID (pull)"""
     ssid = "test-ft"
@@ -522,6 +528,7 @@ def test_ap_ft_mismatching_r0kh_id_pull(dev, apdev):
     dev[0].scan_for_bss(apdev[1]['bssid'], freq="2412")
     dev[0].roam_over_ds(apdev[1]['bssid'], fail_test=True)
 
+@remote_compatible
 def test_ap_ft_mismatching_rrb_r0kh_push(dev, apdev):
     """WPA2-PSK-FT AP over DS with mismatching R0KH key (push)"""
     ssid = "test-ft"
@@ -537,6 +544,7 @@ def test_ap_ft_mismatching_rrb_r0kh_push(dev, apdev):
     run_roams(dev[0], apdev, hapd0, hapd1, ssid, passphrase, over_ds=True,
               fail_test=True)
 
+@remote_compatible
 def test_ap_ft_mismatching_rrb_r0kh_pull(dev, apdev):
     """WPA2-PSK-FT AP over DS with mismatching R0KH key (pull)"""
     ssid = "test-ft"
@@ -693,6 +701,7 @@ def test_ft_psk_key_lifetime_in_memory(dev, apdev, params):
     verify_not_present(buf, tk, fname, "TK")
     verify_not_present(buf, gtk, fname, "GTK")
 
+@remote_compatible
 def test_ap_ft_invalid_resp(dev, apdev):
     """WPA2-PSK-FT AP and invalid response IEs"""
     ssid = "test-ft"
@@ -844,6 +853,7 @@ def test_ap_ft_over_ds_proto(dev, apdev):
     msg['payload'] = binascii.unhexlify("0602020000000000" + "020000000400" + "0000" + "3603a1b201" + "3766000000000000000000000000000000000000c4e67ac1999bebd00ff4ae4d5dcaf87896bb060b469f7c78d49623fb395c3455ffffff6b693fe6f8d8c5dfac0a22344750775bd09437f98b238c9f87b97f790c0106000102030406030a6e6173312e77312e6669")
     hapd0.mgmt_tx(msg)
 
+@remote_compatible
 def test_ap_ft_rrb(dev, apdev):
     """WPA2-PSK-FT RRB protocol testing"""
     ssid = "test-ft"
@@ -935,6 +945,7 @@ def test_ap_ft_rrb(dev, apdev):
     if "OK" not in dev[0].request("DATA_TEST_FRAME " + binascii.hexlify(pkt)):
         raise Exception("DATA_TEST_FRAME failed")
 
+@remote_compatible
 def test_rsn_ie_proto_ft_psk_sta(dev, apdev):
     """RSN element protocol testing for FT-PSK + PMF cases on STA side"""
     bssid = apdev[0]['bssid']

tests/hwsim/test_ap_hs20.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import base64
 import binascii
 import struct
@@ -314,6 +315,7 @@ def test_ap_nai_home_realm_query(dev, apdev):
     if "NAI Realm list" not in ev:
         raise Exception("Missing NAI Realm list: " + ev)
 
+@remote_compatible
 def test_ap_interworking_scan_filtering(dev, apdev):
     """Interworking scan filtering with HESSID and access network type"""
     try:
@@ -594,6 +596,7 @@ def test_ap_hs20_auto_interworking(dev, apdev):
     if status['hs20'] != "2":
         raise Exception("Unexpected HS 2.0 support indication")
 
+@remote_compatible
 def test_ap_hs20_auto_interworking_no_match(dev, apdev):
     """Hotspot 2.0 connection with auto_interworking=1 and no matching network"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "mismatch" })
@@ -633,6 +636,7 @@ def test_ap_hs20_auto_interworking_no_match(dev, apdev):
         dev[0].dump_monitor()
     dev[0].request("DISCONNECT")
 
+@remote_compatible
 def test_ap_hs20_auto_interworking_no_cred_match(dev, apdev):
     """Hotspot 2.0 connection with auto_interworking=1 but no cred match"""
     bssid = apdev[0]['bssid']
@@ -669,6 +673,7 @@ def eap_test(dev, ap, eap_params, method, user):
     interworking_select(dev, bssid, freq="2412")
     interworking_connect(dev, bssid, method)
 
+@remote_compatible
 def test_ap_hs20_eap_unknown(dev, apdev):
     """Hotspot 2.0 connection with unknown EAP method"""
     bssid = apdev[0]['bssid']
@@ -694,6 +699,7 @@ def test_ap_hs20_eap_peap_gtc(dev, apdev):
     """Hotspot 2.0 connection with PEAP/GTC"""
     eap_test(dev[0], apdev[0], "25[3:6]", "PEAP", "user")
 
+@remote_compatible
 def test_ap_hs20_eap_peap_unknown(dev, apdev):
     """Hotspot 2.0 connection with PEAP/unknown"""
     bssid = apdev[0]['bssid']
@@ -720,6 +726,7 @@ def test_ap_hs20_eap_ttls_eap_mschapv2(dev, apdev):
     check_eap_capa(dev[0], "MSCHAPV2")
     eap_test(dev[0], apdev[0], "21[3:26][6:7][99:99]", "TTLS", "user")
 
+@remote_compatible
 def test_ap_hs20_eap_ttls_eap_unknown(dev, apdev):
     """Hotspot 2.0 connection with TTLS/EAP-unknown"""
     bssid = apdev[0]['bssid']
@@ -731,6 +738,7 @@ def test_ap_hs20_eap_ttls_eap_unknown(dev, apdev):
     dev[0].add_cred_values(default_cred())
     interworking_select(dev[0], None, no_match=True, freq="2412")
 
+@remote_compatible
 def test_ap_hs20_eap_ttls_eap_unsupported(dev, apdev):
     """Hotspot 2.0 connection with TTLS/EAP-OTP(unsupported)"""
     bssid = apdev[0]['bssid']
@@ -742,6 +750,7 @@ def test_ap_hs20_eap_ttls_eap_unsupported(dev, apdev):
     dev[0].add_cred_values(default_cred())
     interworking_select(dev[0], None, no_match=True, freq="2412")
 
+@remote_compatible
 def test_ap_hs20_eap_ttls_unknown(dev, apdev):
     """Hotspot 2.0 connection with TTLS/unknown"""
     bssid = apdev[0]['bssid']
@@ -779,6 +788,7 @@ def test_ap_hs20_eap_tls(dev, apdev):
     interworking_select(dev[0], bssid, freq="2412")
     interworking_connect(dev[0], bssid, "TLS")
 
+@remote_compatible
 def test_ap_hs20_eap_cert_unknown(dev, apdev):
     """Hotspot 2.0 connection with certificate, but unknown EAP method"""
     bssid = apdev[0]['bssid']
@@ -794,6 +804,7 @@ def test_ap_hs20_eap_cert_unknown(dev, apdev):
                              'private_key': "auth_serv/user.key"})
     interworking_select(dev[0], None, no_match=True, freq="2412")
 
+@remote_compatible
 def test_ap_hs20_eap_cert_unsupported(dev, apdev):
     """Hotspot 2.0 connection with certificate, but unsupported TTLS"""
     bssid = apdev[0]['bssid']
@@ -809,6 +820,7 @@ def test_ap_hs20_eap_cert_unsupported(dev, apdev):
                              'private_key': "auth_serv/user.key"})
     interworking_select(dev[0], None, no_match=True, freq="2412")
 
+@remote_compatible
 def test_ap_hs20_eap_invalid_cred(dev, apdev):
     """Hotspot 2.0 connection with invalid cred configuration"""
     bssid = apdev[0]['bssid']

tests/hwsim/test_ap_ht.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -65,6 +66,7 @@ def test_ap_ht40_scan(dev, apdev):
 
     dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
 
+@remote_compatible
 def test_ap_ht40_scan_conflict(dev, apdev):
     """HT40 co-ex scan conflict"""
     clear_scan_cache(apdev[0])
@@ -105,6 +107,7 @@ def test_ap_ht40_scan_conflict(dev, apdev):
 
     dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
 
+@remote_compatible
 def test_ap_ht40_scan_conflict2(dev, apdev):
     """HT40 co-ex scan conflict (HT40-)"""
     clear_scan_cache(apdev[0])
@@ -192,6 +195,7 @@ def test_ap_ht40_scan_not_affected(dev, apdev):
 
     dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
 
+@remote_compatible
 def test_ap_ht40_scan_legacy_conflict(dev, apdev):
     """HT40 co-ex scan conflict with legacy 20 MHz AP"""
     clear_scan_cache(apdev[0])
@@ -231,6 +235,7 @@ def test_ap_ht40_scan_legacy_conflict(dev, apdev):
 
     dev[0].connect("test-ht40", key_mgmt="NONE", scan_freq=freq)
 
+@remote_compatible
 def test_ap_ht40_scan_ht20_conflict(dev, apdev):
     """HT40 co-ex scan conflict with HT 20 MHz AP"""
     clear_scan_cache(apdev[0])
@@ -787,6 +792,7 @@ def test_ap_require_ht(dev, apdev):
                    ampdu_density="1", disable_ht40="1", disable_sgi="1",
                    disable_ldpc="1")
 
+@remote_compatible
 def test_ap_require_ht_limited_rates(dev, apdev):
     """Require HT with limited supported rates"""
     params = { "ssid": "require-ht",
@@ -804,6 +810,7 @@ def test_ap_require_ht_limited_rates(dev, apdev):
     if "status_code=27" not in ev:
         raise Exception("Unexpected rejection status code")
 
+@remote_compatible
 def test_ap_ht_capab_not_supported(dev, apdev):
     """HT configuration with driver not supporting all ht_capab entries"""
     params = { "ssid": "test-ht40",
@@ -1028,6 +1035,7 @@ def test_ap_ht40_csa3(dev, apdev):
         set_world_reg(apdev[0], None, dev[0])
         dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_ht_smps(dev, apdev):
     """SMPS AP configuration options"""
     params = { "ssid": "ht1", "ht_capab": "[SMPS-STATIC]" }
@@ -1043,6 +1051,7 @@ def test_ap_ht_smps(dev, apdev):
     hwsim_utils.test_connectivity(dev[0], hapd)
     hwsim_utils.test_connectivity(dev[1], hapd2)
 
+@remote_compatible
 def test_prefer_ht20(dev, apdev):
     """Preference on HT20 over no-HT"""
     params = { "ssid": "test",
@@ -1098,6 +1107,7 @@ def test_prefer_ht40(dev, apdev):
     if est != "135000":
         raise Exception("Unexpected BSS1 est_throughput: " + est)
 
+@remote_compatible
 def test_prefer_ht20_during_roam(dev, apdev):
     """Preference on HT20 over no-HT in roaming consideration"""
     params = { "ssid": "test",
@@ -1121,6 +1131,7 @@ def test_prefer_ht20_during_roam(dev, apdev):
     if dev[0].get_status_field('bssid') != bssid2:
         raise Exception("Unexpected BSS selected")
 
+@remote_compatible
 def test_ap_ht40_5ghz_invalid_pair(dev, apdev):
     """HT40 on 5 GHz with invalid channel pair"""
     clear_scan_cache(apdev[0])
@@ -1141,6 +1152,7 @@ def test_ap_ht40_5ghz_invalid_pair(dev, apdev):
     finally:
         set_world_reg(apdev[0], None, None)
 
+@remote_compatible
 def test_ap_ht40_5ghz_disabled_sec(dev, apdev):
     """HT40 on 5 GHz with disabled secondary channel"""
     clear_scan_cache(apdev[0])

tests/hwsim/test_ap_open.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import struct
@@ -17,6 +18,7 @@ from tshark import run_tshark
 from utils import alloc_fail
 from wpasupplicant import WpaSupplicant
 
+@remote_compatible
 def test_ap_open(dev, apdev):
     """AP with open mode (no security) configuration"""
     _test_ap_open(dev, apdev)
@@ -49,6 +51,7 @@ def test_ap_open_packet_loss(dev, apdev):
     for i in range(0, 3):
         dev[i].wait_connected(timeout=20)
 
+@remote_compatible
 def test_ap_open_unknown_action(dev, apdev):
     """AP with open mode configuration and unknown Action frame"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -75,6 +78,7 @@ def test_ap_open_invalid_wmm_action(dev, apdev):
     if ev is None or "result=SUCCESS" not in ev:
         raise Exception("AP did not ack Action frame")
 
+@remote_compatible
 def test_ap_open_reconnect_on_inactivity_disconnect(dev, apdev):
     """Reconnect to open mode AP after inactivity related disconnection"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -83,6 +87,7 @@ def test_ap_open_reconnect_on_inactivity_disconnect(dev, apdev):
     dev[0].wait_disconnected(timeout=5)
     dev[0].wait_connected(timeout=2, error="Timeout on reconnection")
 
+@remote_compatible
 def test_ap_open_assoc_timeout(dev, apdev):
     """AP timing out association"""
     ssid = "test"
@@ -123,6 +128,7 @@ def test_ap_open_assoc_timeout(dev, apdev):
     hapd.set("ext_mgmt_frame_handling", "0")
     dev[0].wait_connected(timeout=15)
 
+@remote_compatible
 def test_ap_open_id_str(dev, apdev):
     """AP with open mode and id_str"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -134,6 +140,7 @@ def test_ap_open_id_str(dev, apdev):
     if dev[0].get_status_field("id_str") != "foo":
         raise Exception("id_str mismatch")
 
+@remote_compatible
 def test_ap_open_select_any(dev, apdev):
     """AP with open mode and select any network"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -152,6 +159,7 @@ def test_ap_open_select_any(dev, apdev):
     dev[0].select_network("any")
     dev[0].wait_connected(timeout=10)
 
+@remote_compatible
 def test_ap_open_unexpected_assoc_event(dev, apdev):
     """AP with open mode and unexpected association event"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -173,6 +181,7 @@ def test_ap_open_unexpected_assoc_event(dev, apdev):
                         apdev[0]['bssid']])
     dev[0].wait_disconnected(timeout=15)
 
+@remote_compatible
 def test_ap_bss_load(dev, apdev):
     """AP with open mode (no security) configuration"""
     hapd = hostapd.add_ap(apdev[0],
@@ -300,6 +309,7 @@ def _test_ap_open_wpas_in_bridge(dev, apdev):
 
     wpas.connect("open", key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ap_open_start_disabled(dev, apdev):
     """AP with open mode and beaconing disabled"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
@@ -315,6 +325,7 @@ def test_ap_open_start_disabled(dev, apdev):
     dev[0].scan_for_bss(bssid, freq=2412)
     dev[0].connect("open", key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ap_open_start_disabled2(dev, apdev):
     """AP with open mode and beaconing disabled (2)"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open",
@@ -336,6 +347,7 @@ def test_ap_open_start_disabled2(dev, apdev):
     dev[0].request("RECONNECT")
     dev[0].wait_connected()
 
+@remote_compatible
 def test_ap_open_ifdown(dev, apdev):
     """AP with open mode and external ifconfig down"""
     params = { "ssid": "open",
@@ -409,6 +421,7 @@ def test_ap_open_disconnect_in_ps(dev, apdev, params):
         if state != 2:
             raise Exception("Didn't observe TIM bit getting set and unset (state=%d)" % state)
 
+@remote_compatible
 def test_ap_open_select_network(dev, apdev):
     """Open mode connection and SELECT_NETWORK to change network"""
     hapd1 = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -435,6 +448,7 @@ def test_ap_open_select_network(dev, apdev):
     if bssid1 in res or bssid2 in res:
         raise Exception("Unexpected blacklist entry(2)")
 
+@remote_compatible
 def test_ap_open_disable_enable(dev, apdev):
     """AP with open mode getting disabled and re-enabled"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -486,6 +500,7 @@ def test_ap_open_sta_enable_disable(dev, apdev):
     wpas.interface_add("wlan5", drv_params="force_connect_cmd=1")
     sta_enable_disable(wpas, bssid)
 
+@remote_compatible
 def test_ap_open_select_twice(dev, apdev):
     """AP with open mode and select network twice"""
     id = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
@@ -500,6 +515,7 @@ def test_ap_open_select_twice(dev, apdev):
     dev[0].select_network(id)
     dev[0].wait_connected(timeout=3)
 
+@remote_compatible
 def test_ap_open_reassoc_not_found(dev, apdev):
     """AP with open mode and REASSOCIATE not finding a match"""
     id = dev[0].connect("open", key_mgmt="NONE", scan_freq="2412",
@@ -519,6 +535,7 @@ def test_ap_open_reassoc_not_found(dev, apdev):
         raise Exception("No result reported")
     dev[0].request("DISCONNECT")
 
+@remote_compatible
 def test_ap_open_sta_statistics(dev, apdev):
     """AP with open mode and STA statistics"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -538,6 +555,7 @@ def test_ap_open_sta_statistics(dev, apdev):
     # unrelated traffic, so for now, just print out the results in the log for
     # manual checks.
 
+@remote_compatible
 def test_ap_open_poll_sta(dev, apdev):
     """AP with open mode and STA poll"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })

tests/hwsim/test_ap_params.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import os
@@ -13,6 +14,7 @@ import hostapd
 from tshark import run_tshark
 from utils import alloc_fail
 
+@remote_compatible
 def test_ap_fragmentation_rts_set_high(dev, apdev):
     """WPA2-PSK AP with fragmentation and RTS thresholds larger than frame length"""
     ssid = "test-wpa2-psk"
@@ -24,6 +26,7 @@ def test_ap_fragmentation_rts_set_high(dev, apdev):
     dev[0].connect(ssid, psk=passphrase, scan_freq="2412")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_fragmentation_open(dev, apdev):
     """Open AP with fragmentation threshold"""
     ssid = "fragmentation"
@@ -34,6 +37,7 @@ def test_ap_fragmentation_open(dev, apdev):
     dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_fragmentation_wpa2(dev, apdev):
     """WPA2-PSK AP with fragmentation threshold"""
     ssid = "test-wpa2-psk"
@@ -80,6 +84,7 @@ def test_ap_element_parse(dev, apdev):
     if "38050102030405" not in bss['ie']:
         raise Exception("Timeout element not shown in scan results")
 
+@remote_compatible
 def test_ap_element_parse_oom(dev, apdev):
     """Information element parsing OOM"""
     bssid = apdev[0]['bssid']
@@ -150,6 +155,7 @@ def test_ap_acl_deny(dev, apdev):
     if ev is not None:
         raise Exception("Unexpected association")
 
+@remote_compatible
 def test_ap_wds_sta(dev, apdev):
     """WPA2-PSK AP with STA using 4addr mode"""
     ssid = "test-wpa2-psk"
@@ -172,6 +178,7 @@ def test_ap_wds_sta(dev, apdev):
         dev[0].cmd_execute(['ip', 'link', 'set', 'dev', 'wds-br0', 'down'])
         dev[0].cmd_execute(['brctl', 'delbr', 'wds-br0'])
 
+@remote_compatible
 def test_ap_inactivity_poll(dev, apdev):
     """AP using inactivity poll"""
     ssid = "test-wpa2-psk"
@@ -190,6 +197,7 @@ def test_ap_inactivity_poll(dev, apdev):
     if ev is None:
         raise Exception("STA disconnection on inactivity was not reported")
 
+@remote_compatible
 def test_ap_inactivity_disconnect(dev, apdev):
     """AP using inactivity disconnect"""
     ssid = "test-wpa2-psk"
@@ -209,6 +217,7 @@ def test_ap_inactivity_disconnect(dev, apdev):
     if ev is None:
         raise Exception("STA disconnection on inactivity was not reported")
 
+@remote_compatible
 def test_ap_basic_rates(dev, apdev):
     """Open AP with lots of basic rates"""
     ssid = "basic rates"
@@ -218,6 +227,7 @@ def test_ap_basic_rates(dev, apdev):
     hostapd.add_ap(apdev[0], params)
     dev[0].connect(ssid, key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ap_short_preamble(dev, apdev):
     """Open AP with short preamble"""
     ssid = "short preamble"
@@ -249,6 +259,7 @@ def test_ap_spectrum_management_required(dev, apdev):
         hostapd.cmd_execute(apdev[0], ['iw', 'reg', 'set', '00'])
         dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_max_listen_interval(dev, apdev):
     """Open AP with maximum listen interval limit"""
     ssid = "listen"
@@ -263,6 +274,7 @@ def test_ap_max_listen_interval(dev, apdev):
     if "status_code=51" not in ev:
         raise Exception("Unexpected ASSOC-REJECT reason")
 
+@remote_compatible
 def test_ap_max_num_sta(dev, apdev):
     """Open AP with maximum STA count"""
     ssid = "max"
@@ -305,6 +317,7 @@ def test_ap_max_num_sta_no_probe_resp(dev, apdev, params):
         if seen:
             raise Exception("AP found unexpectedly")
 
+@remote_compatible
 def test_ap_tx_queue_params(dev, apdev):
     """Open AP with TX queue params set"""
     ssid = "tx"

tests/hwsim/test_ap_pmf.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -13,6 +14,7 @@ import hostapd
 from wlantest import Wlantest
 from wpasupplicant import WpaSupplicant
 
+@remote_compatible
 def test_ap_pmf_required(dev, apdev):
     """WPA2-PSK AP with PMF required"""
     ssid = "test-pmf-required"
@@ -50,6 +52,7 @@ def test_ap_pmf_required(dev, apdev):
                           dev[1].p2p_interface_addr()) < 1:
         raise Exception("STA did not reply to SA Query")
 
+@remote_compatible
 def test_ap_pmf_optional(dev, apdev):
     """WPA2-PSK AP with PMF optional"""
     ssid = "test-pmf-optional"
@@ -73,6 +76,7 @@ def test_ap_pmf_optional(dev, apdev):
     wt.require_sta_pmf(apdev[0]['bssid'], dev[0].p2p_interface_addr())
     wt.require_sta_pmf_mandatory(apdev[0]['bssid'], dev[1].p2p_interface_addr())
 
+@remote_compatible
 def test_ap_pmf_optional_2akm(dev, apdev):
     """WPA2-PSK AP with PMF optional (2 AKMs)"""
     ssid = "test-pmf-optional-2akm"
@@ -100,6 +104,7 @@ def test_ap_pmf_optional_2akm(dev, apdev):
     wt.require_sta_key_mgmt(apdev[0]['bssid'], dev[1].p2p_interface_addr(),
                             "PSK-SHA256")
 
+@remote_compatible
 def test_ap_pmf_negative(dev, apdev):
     """WPA2-PSK AP without PMF (negative test)"""
     ssid = "test-pmf-negative"
@@ -123,6 +128,7 @@ def test_ap_pmf_negative(dev, apdev):
         logger.debug("Ignore expected exception: " + str(e))
     wt.require_ap_no_pmf(apdev[0]['bssid'])
 
+@remote_compatible
 def test_ap_pmf_assoc_comeback(dev, apdev):
     """WPA2-PSK AP with PMF association comeback"""
     ssid = "assoc-comeback"
@@ -147,6 +153,7 @@ def test_ap_pmf_assoc_comeback(dev, apdev):
                           dev[0].p2p_interface_addr()) < 1:
         raise Exception("AP did not use association comeback request")
 
+@remote_compatible
 def test_ap_pmf_assoc_comeback2(dev, apdev):
     """WPA2-PSK AP with PMF association comeback (using DROP_SA)"""
     ssid = "assoc-comeback"
@@ -354,6 +361,7 @@ def test_ap_pmf_optional_eap(dev, apdev):
                    ca_cert="auth_serv/ca.pem", phase2="auth=PAP",
                    ieee80211w="2", scan_freq="2412")
 
+@remote_compatible
 def test_ap_pmf_required_sha1(dev, apdev):
     """WPA2-PSK AP with PMF required with SHA1 AKM"""
     ssid = "test-pmf-required-sha1"
@@ -374,6 +382,7 @@ def test_ap_pmf_required_sha1(dev, apdev):
         raise Exception("Scan results missing RSN element info")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_pmf_toggle(dev, apdev):
     """WPA2-PSK AP with PMF optional and changing PMF on reassociation"""
     try:
@@ -429,6 +438,7 @@ def _test_ap_pmf_toggle(dev, apdev):
     if "yes" not in [l for l in data.splitlines() if "MFP" in l][0]:
         raise Exception("Kernel STA entry did not have MFP enabled")
 
+@remote_compatible
 def test_ap_pmf_required_sta_no_pmf(dev, apdev):
     """WPA2-PSK AP with PMF required and PMF disabled on STA"""
     ssid = "test-pmf-required"

tests/hwsim/test_ap_psk.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 from Crypto.Cipher import AES
 import hashlib
@@ -27,6 +28,7 @@ def check_mib(dev, vals):
         if mib[v[0]] != v[1]:
             raise Exception("Unexpected {} = {} (expected {})".format(v[0], mib[v[0]], v[1]))
 
+@remote_compatible
 def test_ap_wpa2_psk(dev, apdev):
     """WPA2-PSK AP with PSK instead of passphrase"""
     ssid = "test-wpa2-psk"
@@ -68,6 +70,7 @@ def test_ap_wpa2_psk_file(dev, apdev):
         raise Exception("Timed out while waiting for failure report")
     dev[1].request("REMOVE_NETWORK all")
 
+@remote_compatible
 def test_ap_wpa2_psk_mem(dev, apdev):
     """WPA2-PSK AP with passphrase only in memory"""
     try:
@@ -102,6 +105,7 @@ def _test_ap_wpa2_psk_mem(dev, apdev):
     dev[1].request("CTRL-RSP-PSK_PASSPHRASE-" + id + ':' + psk)
     dev[1].wait_connected(timeout=10)
 
+@remote_compatible
 def test_ap_wpa2_ptk_rekey(dev, apdev):
     """WPA2-PSK AP and PTK rekey enforced by station"""
     ssid = "test-wpa2-psk"
@@ -114,6 +118,7 @@ def test_ap_wpa2_ptk_rekey(dev, apdev):
         raise Exception("PTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_ptk_rekey_ap(dev, apdev):
     """WPA2-PSK AP and PTK rekey enforced by AP"""
     ssid = "test-wpa2-psk"
@@ -127,6 +132,7 @@ def test_ap_wpa2_ptk_rekey_ap(dev, apdev):
         raise Exception("PTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_sha256_ptk_rekey(dev, apdev):
     """WPA2-PSK/SHA256 AKM AP and PTK rekey enforced by station"""
     ssid = "test-wpa2-psk"
@@ -143,6 +149,7 @@ def test_ap_wpa2_sha256_ptk_rekey(dev, apdev):
     check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-6"),
                         ("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-6") ])
 
+@remote_compatible
 def test_ap_wpa2_sha256_ptk_rekey_ap(dev, apdev):
     """WPA2-PSK/SHA256 AKM AP and PTK rekey enforced by AP"""
     ssid = "test-wpa2-psk"
@@ -160,6 +167,7 @@ def test_ap_wpa2_sha256_ptk_rekey_ap(dev, apdev):
     check_mib(dev[0], [ ("dot11RSNAAuthenticationSuiteRequested", "00-0f-ac-6"),
                         ("dot11RSNAAuthenticationSuiteSelected", "00-0f-ac-6") ])
 
+@remote_compatible
 def test_ap_wpa_ptk_rekey(dev, apdev):
     """WPA-PSK/TKIP AP and PTK rekey enforced by station"""
     skip_with_fips(dev[0])
@@ -175,6 +183,7 @@ def test_ap_wpa_ptk_rekey(dev, apdev):
         raise Exception("PTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa_ptk_rekey_ap(dev, apdev):
     """WPA-PSK/TKIP AP and PTK rekey enforced by AP"""
     skip_with_fips(dev[0])
@@ -189,6 +198,7 @@ def test_ap_wpa_ptk_rekey_ap(dev, apdev):
         raise Exception("PTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa_ccmp(dev, apdev):
     """WPA-PSK/CCMP"""
     ssid = "test-wpa-psk"
@@ -270,6 +280,7 @@ def test_ap_wpa2_psk_file(dev, apdev):
         except:
             pass
 
+@remote_compatible
 def test_ap_wpa2_psk_wildcard_ssid(dev, apdev):
     """WPA2-PSK AP and wildcard SSID configuration"""
     ssid = "test-wpa2-psk"
@@ -281,6 +292,7 @@ def test_ap_wpa2_psk_wildcard_ssid(dev, apdev):
                    scan_freq="2412")
     dev[1].connect("", bssid=apdev[0]['bssid'], raw_psk=psk, scan_freq="2412")
 
+@remote_compatible
 def test_ap_wpa2_gtk_rekey(dev, apdev):
     """WPA2-PSK AP and GTK rekey enforced by AP"""
     ssid = "test-wpa2-psk"
@@ -294,6 +306,7 @@ def test_ap_wpa2_gtk_rekey(dev, apdev):
         raise Exception("GTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa_gtk_rekey(dev, apdev):
     """WPA-PSK/TKIP AP and GTK rekey enforced by AP"""
     skip_with_fips(dev[0])
@@ -308,6 +321,7 @@ def test_ap_wpa_gtk_rekey(dev, apdev):
         raise Exception("GTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_gmk_rekey(dev, apdev):
     """WPA2-PSK AP and GMK and GTK rekey enforced by AP"""
     ssid = "test-wpa2-psk"
@@ -323,6 +337,7 @@ def test_ap_wpa2_gmk_rekey(dev, apdev):
             raise Exception("GTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_strict_rekey(dev, apdev):
     """WPA2-PSK AP and strict GTK rekey enforced by AP"""
     ssid = "test-wpa2-psk"
@@ -338,6 +353,7 @@ def test_ap_wpa2_strict_rekey(dev, apdev):
         raise Exception("GTK rekey timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_bridge_fdb(dev, apdev):
     """Bridge FDB entry removal"""
     hapd = None
@@ -372,6 +388,7 @@ def test_ap_wpa2_bridge_fdb(dev, apdev):
                                        'down'])
         hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', 'ap-br0'])
 
+@remote_compatible
 def test_ap_wpa2_already_in_bridge(dev, apdev):
     """hostapd behavior with interface already in bridge"""
     ifname = apdev[0]['ifname']
@@ -397,6 +414,7 @@ def test_ap_wpa2_already_in_bridge(dev, apdev):
         hostapd.cmd_execute(apdev[0], ['iw', ifname, 'set', 'type', 'station'])
         hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', br_ifname])
 
+@remote_compatible
 def test_ap_wpa2_in_different_bridge(dev, apdev):
     """hostapd behavior with interface in different bridge"""
     ifname = apdev[0]['ifname']
@@ -435,6 +453,7 @@ def test_ap_wpa2_in_different_bridge(dev, apdev):
                                        "2>", "/dev/null"], shell=True)
         hostapd.cmd_execute(apdev[0], ['brctl', 'delbr', br_ifname])
 
+@remote_compatible
 def test_ap_wpa2_ext_add_to_bridge(dev, apdev):
     """hostapd behavior with interface added to bridge externally"""
     ifname = apdev[0]['ifname']
@@ -711,6 +730,7 @@ def eapol_test(apdev, dev, wpa2=True):
     snonce = binascii.unhexlify('1111111111111111111111111111111111111111111111111111111111111111')
     return (bssid,ssid,hapd,snonce,pmk,addr,rsne)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol(dev, apdev):
     """WPA2-PSK AP using external EAPOL supplicant"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -738,6 +758,7 @@ def test_ap_wpa2_psk_ext_eapol(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_retry1(dev, apdev):
     """WPA2 4-way handshake with EAPOL-Key 1/4 retransmitted"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -764,6 +785,7 @@ def test_ap_wpa2_psk_ext_eapol_retry1(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_retry1b(dev, apdev):
     """WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -785,6 +807,7 @@ def test_ap_wpa2_psk_ext_eapol_retry1b(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_retry1c(dev, apdev):
     """WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted and SNonce changing"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -808,6 +831,7 @@ def test_ap_wpa2_psk_ext_eapol_retry1c(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_retry1d(dev, apdev):
     """WPA2 4-way handshake with EAPOL-Key 1/4 and 2/4 retransmitted and SNonce changing and older used"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -831,6 +855,7 @@ def test_ap_wpa2_psk_ext_eapol_retry1d(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_type_diff(dev, apdev):
     """WPA2 4-way handshake using external EAPOL supplicant"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -861,6 +886,7 @@ def test_ap_wpa2_psk_ext_eapol_type_diff(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa_psk_ext_eapol(dev, apdev):
     """WPA2-PSK AP using external EAPOL supplicant"""
     (bssid,ssid,hapd,snonce,pmk,addr,wpae) = eapol_test(apdev[0], dev[0],
@@ -888,6 +914,7 @@ def test_ap_wpa_psk_ext_eapol(dev, apdev):
     reply_eapol("4/4", hapd, addr, msg, 0x030a, None, None, kck)
     hapd_connected(hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_ext_eapol_key_info(dev, apdev):
     """WPA2-PSK 4-way handshake with strange key info values"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -1364,6 +1391,7 @@ def test_ap_wpa2_psk_supp_proto_unexpected_group_msg(dev, apdev):
         raise Exception("Unexpected group key message not reported")
     dev[0].wait_disconnected(timeout=1)
 
+@remote_compatible
 def test_ap_wpa2_psk_supp_proto_msg_1_invalid_kde(dev, apdev):
     """WPA2-PSK supplicant protocol testing: invalid KDE in msg 1/4"""
     (bssid,ssid,hapd,snonce,pmk,addr,rsne) = eapol_test(apdev[0], dev[0])
@@ -1840,6 +1868,7 @@ def test_wpa2_psk_key_lifetime_in_memory(dev, apdev, params):
     verify_not_present(buf, tk, fname, "TK")
     verify_not_present(buf, gtk, fname, "GTK")
 
+@remote_compatible
 def test_ap_wpa2_psk_wep(dev, apdev):
     """WPA2-PSK AP and WEP enabled"""
     ssid = "test-wpa2-psk"
@@ -1884,6 +1913,7 @@ def _test_ap_wpa2_psk_wpas_in_bridge(dev, apdev):
     wpas.connect(ssid, psk=passphrase, scan_freq="2412")
     wpas.dump_monitor()
 
+@remote_compatible
 def test_ap_wpa2_psk_ifdown(dev, apdev):
     """AP with open mode and external ifconfig down"""
     ssid = "test-wpa2-psk"
@@ -1973,6 +2003,7 @@ def test_ap_wpa2_psk_drop_first_msg_4(dev, apdev):
         # case, this exception can be uncommented here.
         #raise Exception("Unexpected disconnection")
 
+@remote_compatible
 def test_ap_wpa2_psk_disable_enable(dev, apdev):
     """WPA2-PSK AP getting disabled and re-enabled"""
     ssid = "test-wpa2-psk"
@@ -1990,6 +2021,7 @@ def test_ap_wpa2_psk_disable_enable(dev, apdev):
         dev[0].wait_connected()
         hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_wpa2_psk_incorrect_passphrase(dev, apdev):
     """WPA2-PSK AP and station using incorrect passphrase"""
     ssid = "test-wpa2-psk"
@@ -2009,6 +2041,7 @@ def test_ap_wpa2_psk_incorrect_passphrase(dev, apdev):
 
     dev[0].wait_connected(timeout=20)
 
+@remote_compatible
 def test_ap_wpa_ie_parsing(dev, apdev):
     """WPA IE parsing"""
     skip_with_fips(dev[0])
@@ -2069,6 +2102,7 @@ def test_ap_wpa_ie_parsing(dev, apdev):
         finally:
             dev[0].request("VENDOR_ELEM_REMOVE 13 *")
 
+@remote_compatible
 def test_ap_wpa2_psk_no_random(dev, apdev):
     """WPA2-PSK AP and no random numbers available"""
     ssid = "test-wpa2-psk"
@@ -2087,6 +2121,7 @@ def test_ap_wpa2_psk_no_random(dev, apdev):
         dev[0].select_network(id, freq=2412)
         dev[0].wait_connected()
 
+@remote_compatible
 def test_rsn_ie_proto_psk_sta(dev, apdev):
     """RSN element protocol testing for PSK cases on STA side"""
     bssid = apdev[0]['bssid']
@@ -2126,6 +2161,7 @@ def test_rsn_ie_proto_psk_sta(dev, apdev):
         dev[0].select_network(id, freq=2412)
         dev[0].wait_connected()
 
+@remote_compatible
 def test_ap_cli_order(dev, apdev):
     ssid = "test-rsn-setup"
     passphrase = 'zzzzzzzz'
@@ -2155,6 +2191,7 @@ def set_test_assoc_ie(dev, ie):
     if "OK" not in dev.request("TEST_ASSOC_IE " + ie):
         raise Exception("Could not set TEST_ASSOC_IE")
 
+@remote_compatible
 def test_ap_wpa2_psk_assoc_rsn(dev, apdev):
     """WPA2-PSK AP and association request RSN IE differences"""
     ssid = "test-wpa2-psk"

tests/hwsim/test_ap_qosmap.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -33,6 +34,7 @@ def check_qos_map(ap, hapd, dev, sta, dscp, tid, ap_tid=None):
         logger.info("Expected RX DSCP " + str(dscp) + " with TID " + str(ap_tid) + " but counters: " + str(rx))
         raise Exception("No AP->STA data frame using the expected TID")
 
+@remote_compatible
 def test_ap_qosmap(dev, apdev):
     """QoS mapping"""
     drv_flags = dev[0].get_driver_status_field("capa.flags")
@@ -72,6 +74,7 @@ def test_ap_qosmap(dev, apdev):
     dev[0].request("DATA_TEST_CONFIG 0")
     hapd.request("DATA_TEST_CONFIG 0")
 
+@remote_compatible
 def test_ap_qosmap_default(dev, apdev):
     """QoS mapping with default values"""
     ssid = "test-qosmap-default"
@@ -86,6 +89,7 @@ def test_ap_qosmap_default(dev, apdev):
     dev[0].request("DATA_TEST_CONFIG 0")
     hapd.request("DATA_TEST_CONFIG 0")
 
+@remote_compatible
 def test_ap_qosmap_default_acm(dev, apdev):
     """QoS mapping with default values and ACM=1 for VO/VI"""
     ssid = "test-qosmap-default"
@@ -125,6 +129,7 @@ def test_ap_qosmap_default_acm(dev, apdev):
     dev[0].request("DATA_TEST_CONFIG 0")
     hapd.request("DATA_TEST_CONFIG 0")
 
+@remote_compatible
 def test_ap_qosmap_invalid(dev, apdev):
     """QoS mapping ctrl_iface error handling"""
     ssid = "test-qosmap"

tests/hwsim/test_ap_roam.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -11,6 +12,7 @@ logger = logging.getLogger()
 import hwsim_utils
 import hostapd
 
+@remote_compatible
 def test_ap_roam_open(dev, apdev):
     """Roam between two open APs"""
     hapd0 = hostapd.add_ap(apdev[0], { "ssid": "test-open" })
@@ -23,6 +25,7 @@ def test_ap_roam_open(dev, apdev):
     dev[0].roam(apdev[0]['bssid'])
     hwsim_utils.test_connectivity(dev[0], hapd0)
 
+@remote_compatible
 def test_ap_roam_open_failed(dev, apdev):
     """Roam failure due to rejected authentication"""
     hapd0 = hostapd.add_ap(apdev[0], { "ssid": "test-open" })
@@ -44,6 +47,7 @@ def test_ap_roam_open_failed(dev, apdev):
     dev[0].wait_connected(timeout=5)
     hwsim_utils.test_connectivity(dev[0], hapd0)
 
+@remote_compatible
 def test_ap_roam_wpa2_psk(dev, apdev):
     """Roam between two WPA2-PSK APs"""
     params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")
@@ -89,6 +93,7 @@ def test_ap_roam_wpa2_psk_failed(dev, apdev, params):
     dev[0].wait_connected(timeout=5)
     hwsim_utils.test_connectivity(dev[0], hapd0)
 
+@remote_compatible
 def test_ap_reassociation_to_same_bss(dev, apdev):
     """Reassociate to the same BSS"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "test-open" })
@@ -108,6 +113,7 @@ def test_ap_reassociation_to_same_bss(dev, apdev):
     dev[0].wait_connected(timeout=10, error="Reattach timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_ap_roam_set_bssid(dev, apdev):
     """Roam control"""
     hostapd.add_ap(apdev[0], { "ssid": "test-open" })
@@ -124,6 +130,7 @@ def test_ap_roam_set_bssid(dev, apdev):
     dev[0].set_network(id, "bssid", apdev[0]['bssid'])
     dev[0].set_network(id, "bssid", apdev[1]['bssid'])
 
+@remote_compatible
 def test_ap_roam_wpa2_psk_race(dev, apdev):
     """Roam between two WPA2-PSK APs and try to hit a disconnection race"""
     params = hostapd.wpa2_params(ssid="test-wpa2-psk", passphrase="12345678")

tests/hwsim/test_ap_tdls.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -163,6 +164,7 @@ def check_tdls_link(sta0, sta1, connected=True):
         if connected:
             raise Exception("Expected TDLS link status to be connected")
 
+@remote_compatible
 def test_ap_tdls_discovery(dev, apdev):
     """WPA2-PSK AP and two stations using TDLS discovery"""
     hapd = start_ap_wpa2_psk(apdev[0])

tests/hwsim/test_ap_vlan.py

@@ -6,6 +6,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import subprocess
 import logging
@@ -531,6 +532,7 @@ def test_ap_vlan_without_station(dev, apdev, p):
                         stderr=open('/dev/null', 'w'))
         subprocess.call(['brctl', 'delbr', 'brvlan1'])
 
+@remote_compatible
 def test_ap_open_per_sta_vif(dev, apdev):
     """AP VLAN with open network"""
     params = { "ssid": "test-vlan-open",
@@ -541,6 +543,7 @@ def test_ap_open_per_sta_vif(dev, apdev):
     hwsim_utils.test_connectivity_iface(dev[0], hapd,
                                         apdev[0]['ifname'] + ".4096")
 
+@remote_compatible
 def test_ap_vlan_open_per_sta_vif(dev, apdev):
     """AP VLAN (dynamic) with open network"""
     params = { "ssid": "test-vlan-open",

tests/hwsim/test_ap_wps.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import base64
 import binascii
 from Crypto.Cipher import AES
@@ -38,6 +39,7 @@ def wps_start_ap(apdev, ssid="test-wps-conf"):
                "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP" }
     return hostapd.add_ap(apdev, params)
 
+@remote_compatible
 def test_ap_wps_init(dev, apdev):
     """Initial AP configuration with first WPS Enrollee"""
     ssid = "test-wps"
@@ -159,6 +161,7 @@ def test_ap_wps_init_2ap_pin(dev, apdev):
     if "[WPS-AUTH]" in bss['flags']:
         raise Exception("WPS-AUTH flag not cleared from AP2")
 
+@remote_compatible
 def test_ap_wps_init_through_wps_config(dev, apdev):
     """Initial AP configuration using wps_config command"""
     ssid = "test-wps-init-config"
@@ -177,6 +180,7 @@ def test_ap_wps_init_through_wps_config(dev, apdev):
     dev[0].connect(ssid, psk="12345678", scan_freq="2412", proto="WPA2",
                    pairwise="CCMP", group="CCMP")
 
+@remote_compatible
 def test_ap_wps_init_through_wps_config_2(dev, apdev):
     """AP configuration using wps_config and wps_cred_processing=2"""
     ssid = "test-wps-init-config"
@@ -191,6 +195,7 @@ def test_ap_wps_init_through_wps_config_2(dev, apdev):
     if "100e" not in ev:
         raise Exception("WPS-NEW-AP-SETTINGS did not include Credential")
 
+@remote_compatible
 def test_ap_wps_invalid_wps_config_passphrase(dev, apdev):
     """AP configuration using wps_config command with invalid passphrase"""
     ssid = "test-wps-init-config"
@@ -279,6 +284,7 @@ def test_ap_wps_conf_chan14(dev, apdev):
         subprocess.call(['iw', 'reg', 'set', '00'])
         dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_twice(dev, apdev):
     """WPS provisioning with twice to change passphrase"""
     ssid = "test-wps-twice"
@@ -307,6 +313,7 @@ def test_ap_wps_twice(dev, apdev):
     if len(networks) > 1:
         raise Exception("Unexpected duplicated network block present")
 
+@remote_compatible
 def test_ap_wps_incorrect_pin(dev, apdev):
     """WPS PIN provisioning with incorrect PIN"""
     ssid = "test-wps-incorrect-pin"
@@ -349,6 +356,7 @@ def test_ap_wps_incorrect_pin(dev, apdev):
         raise Exception("PIN error detected on incorrect message")
     dev[0].wait_disconnected(timeout=10)
 
+@remote_compatible
 def test_ap_wps_conf_pin(dev, apdev):
     """WPS PIN provisioning with configured AP"""
     ssid = "test-wps-conf-pin"
@@ -444,6 +452,7 @@ def test_ap_wps_conf_pin_mixed_mode(dev, apdev):
     dev[0].request("SET wps_force_auth_types ")
     dev[0].request("SET wps_force_encr_types ")
 
+@remote_compatible
 def test_ap_wps_conf_pin_v1(dev, apdev):
     """WPS PIN provisioning with configured WPS v1.0 AP"""
     ssid = "test-wps-conf-pin-v1"
@@ -469,6 +478,7 @@ def test_ap_wps_conf_pin_v1(dev, apdev):
     dev[0].wait_connected(timeout=30)
     hapd.request("SET wps_version_number 0x20")
 
+@remote_compatible
 def test_ap_wps_conf_pin_2sta(dev, apdev):
     """Two stations trying to use WPS PIN at the same time"""
     ssid = "test-wps-conf-pin2"
@@ -490,6 +500,7 @@ def test_ap_wps_conf_pin_2sta(dev, apdev):
     dev[0].wait_connected(timeout=30)
     dev[1].wait_connected(timeout=30)
 
+@remote_compatible
 def test_ap_wps_conf_pin_timeout(dev, apdev):
     """WPS PIN provisioning with configured AP timing out PIN"""
     ssid = "test-wps-conf-pin"
@@ -900,6 +911,7 @@ def test_ap_wps_setup_locked_2(dev, apdev):
     dev[0].request("WPS_CANCEL")
     dev[0].wait_disconnected()
 
+@remote_compatible
 def test_ap_wps_pbc_overlap_2ap(dev, apdev):
     """WPS PBC session overlap with two active APs"""
     params = { "ssid": "wps1", "eap_server": "1", "wps_state": "2",
@@ -925,6 +937,7 @@ def test_ap_wps_pbc_overlap_2ap(dev, apdev):
     hapd2.request("DISABLE")
     dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_pbc_overlap_2sta(dev, apdev):
     """WPS PBC session overlap with two active STAs"""
     ssid = "test-wps-pbc-overlap"
@@ -962,6 +975,7 @@ def test_ap_wps_pbc_overlap_2sta(dev, apdev):
     dev[0].flush_scan_cache()
     dev[1].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_cancel(dev, apdev):
     """WPS AP cancelling enabled config method"""
     ssid = "test-wps-ap-cancel"
@@ -1486,6 +1500,7 @@ def _test_ap_wps_er_v10_add_enrollee_pin(dev, apdev):
     if ev is None:
         raise Exception("WPS ER did not report success")
 
+@remote_compatible
 def test_ap_wps_er_config_ap(dev, apdev):
     """WPS ER configuring AP over UPnP"""
     try:
@@ -1540,6 +1555,7 @@ def _test_ap_wps_er_config_ap(dev, apdev):
     if "OK" not in dev[0].request("WPS_ER_STOP"):
         raise Exception("WPS_ER_STOP failed")
 
+@remote_compatible
 def test_ap_wps_er_cache_ap_settings(dev, apdev):
     """WPS ER caching AP settings"""
     try:
@@ -1833,6 +1849,7 @@ def _test_ap_wps_er_set_sel_reg_oom(dev, apdev):
 
     dev[0].request("WPS_ER_STOP")
 
+@remote_compatible
 def test_ap_wps_er_learn_oom(dev, apdev):
     """WPS ER learn OOM"""
     try:
@@ -1935,6 +1952,7 @@ def test_ap_wps_fragmentation(dev, apdev):
     if status['key_mgmt'] != 'WPA2-PSK':
         raise Exception("Unexpected key_mgmt")
 
+@remote_compatible
 def test_ap_wps_new_version_sta(dev, apdev):
     """WPS compatibility with new version number on the station"""
     ssid = "test-wps-ver"
@@ -1951,6 +1969,7 @@ def test_ap_wps_new_version_sta(dev, apdev):
     dev[0].request("WPS_PBC " + apdev[0]['bssid'])
     dev[0].wait_connected(timeout=30)
 
+@remote_compatible
 def test_ap_wps_new_version_ap(dev, apdev):
     """WPS compatibility with new version number on the AP"""
     ssid = "test-wps-ver"
@@ -1968,6 +1987,7 @@ def test_ap_wps_new_version_ap(dev, apdev):
     dev[0].wait_connected(timeout=30)
     hapd.request("SET wps_version_number 0x20")
 
+@remote_compatible
 def test_ap_wps_check_pin(dev, apdev):
     """Verify PIN checking through control interface"""
     hapd = hostapd.add_ap(apdev[0],
@@ -2037,6 +2057,7 @@ def test_ap_wps_wep_enroll(dev, apdev):
     if "msg=12" not in ev or "reason=2 (WEP Prohibited)" not in ev:
         raise Exception("Unexpected WPS-FAIL event: " + ev)
 
+@remote_compatible
 def test_ap_wps_ie_fragmentation(dev, apdev):
     """WPS AP using fragmented WPS IE"""
     ssid = "test-wps-ie-fragmentation"
@@ -3400,6 +3421,7 @@ def test_ap_wps_upnp_http_proto_chunked(dev, apdev):
         pass
     conn.close()
 
+@remote_compatible
 def test_ap_wps_disabled(dev, apdev):
     """WPS operations while WPS is disabled"""
     ssid = "test-wps-disabled"
@@ -3432,6 +3454,7 @@ def test_ap_wps_mixed_cred(dev, apdev):
     if pairwise != "CCMP TKIP" and pairwise != "CCMP GCMP TKIP":
         raise Exception("Unexpected merged pairwise field value: " + pairwise)
 
+@remote_compatible
 def test_ap_wps_while_connected(dev, apdev):
     """WPS PBC provisioning while connected to another AP"""
     ssid = "test-wps-conf"
@@ -3452,6 +3475,7 @@ def test_ap_wps_while_connected(dev, apdev):
     if status['bssid'] != apdev[0]['bssid']:
         raise Exception("Unexpected BSSID")
 
+@remote_compatible
 def test_ap_wps_while_connected_no_autoconnect(dev, apdev):
     """WPS PBC provisioning while connected to another AP and STA_AUTOCONNECT disabled"""
     ssid = "test-wps-conf"
@@ -3477,6 +3501,7 @@ def test_ap_wps_while_connected_no_autoconnect(dev, apdev):
     finally:
         dev[0].request("STA_AUTOCONNECT 1")
 
+@remote_compatible
 def test_ap_wps_from_event(dev, apdev):
     """WPS PBC event on AP to enable PBC"""
     ssid = "test-wps-conf"
@@ -3532,6 +3557,7 @@ def test_ap_wps_ap_scan_2(dev, apdev):
     wpas.wait_connected(timeout=30)
     wpas.dump_monitor()
 
+@remote_compatible
 def test_ap_wps_eapol_workaround(dev, apdev):
     """EAPOL workaround code path for 802.1X header length mismatch"""
     ssid = "test-wps"
@@ -3638,6 +3664,7 @@ def test_ap_wps_iteration_error(dev, apdev):
         raise Exception("No WPS-CRED-RECEIVED for the second AP")
     dev[0].wait_connected(timeout=15)
 
+@remote_compatible
 def test_ap_wps_priority(dev, apdev):
     """WPS PIN provisioning with configured AP and wps_priority"""
     ssid = "test-wps-conf-pin"
@@ -3661,6 +3688,7 @@ def test_ap_wps_priority(dev, apdev):
     finally:
         dev[0].request("SET wps_priority 0")
 
+@remote_compatible
 def test_ap_wps_and_non_wps(dev, apdev):
     """WPS and non-WPS AP in single hostapd process"""
     params = { "ssid": "wps", "eap_server": "1", "wps_state": "1" }
@@ -3696,6 +3724,7 @@ def test_ap_wps_init_oom(dev, apdev):
     hapd.request("WPS_PIN any " + pin)
     dev[0].wait_connected(timeout=30)
 
+@remote_compatible
 def test_ap_wps_er_oom(dev, apdev):
     """WPS ER OOM in XML processing"""
     try:
@@ -3744,6 +3773,7 @@ def _test_ap_wps_er_oom(dev, apdev):
         if ev is None:
             raise Exception("Enrollee discovery timed out")
 
+@remote_compatible
 def test_ap_wps_er_init_oom(dev, apdev):
     """WPS ER and OOM during init"""
     try:
@@ -3768,6 +3798,7 @@ def _test_ap_wps_er_init_oom(dev, apdev):
         if "FAIL" not in dev[0].request("WPS_ER_START ifname=lo"):
             raise Exception("WPS_ER_START succeeded during os_get_random failure")
 
+@remote_compatible
 def test_ap_wps_er_init_fail(dev, apdev):
     """WPS ER init failure"""
     if "FAIL" not in dev[0].request("WPS_ER_START ifname=does-not-exist"):
@@ -4866,6 +4897,7 @@ def test_ap_wps_init_oom(dev, apdev):
 
     dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_invalid_assoc_req_elem(dev, apdev):
     """WPS and invalid IE in Association Request frame"""
     ssid = "test-wps"
@@ -4905,6 +4937,7 @@ def test_ap_wps_pbc_pin_mismatch(dev, apdev):
     hapd.request("WPS_CANCEL")
     dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_ie_invalid(dev, apdev):
     """WPS PIN attempt with AP that has invalid WSC IE"""
     ssid = "test-wps"
@@ -4921,6 +4954,7 @@ def test_ap_wps_ie_invalid(dev, apdev):
         raise Exception("Scan did not complete")
     dev[0].request("WPS_CANCEL")
 
+@remote_compatible
 def test_ap_wps_scan_prio_order(dev, apdev):
     """WPS scan priority ordering"""
     ssid = "test-wps"
@@ -4995,6 +5029,7 @@ def test_ap_wps_assoc_resp_ie_oom(dev, apdev):
             raise Exception("Association not seen")
     dev[0].request("WPS_CANCEL")
 
+@remote_compatible
 def test_ap_wps_bss_info_errors(dev, apdev):
     """WPS BSS info errors"""
     params = { "ssid": "1",
@@ -5043,17 +5078,20 @@ def wps_run_pbc_fail(apdev, dev):
     hapd = wps_start_ap(apdev)
     wps_run_pbc_fail_ap(apdev, dev, hapd)
 
+@remote_compatible
 def test_ap_wps_pk_oom(dev, apdev):
     """WPS and public key OOM"""
     with alloc_fail(dev[0], 1, "wps_build_public_key"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_pk_oom_ap(dev, apdev):
     """WPS and public key OOM on AP"""
     hapd = wps_start_ap(apdev[0])
     with alloc_fail(hapd, 1, "wps_build_public_key"):
         wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
 
+@remote_compatible
 def test_ap_wps_encr_oom_ap(dev, apdev):
     """WPS and encrypted settings decryption OOM on AP"""
     hapd = wps_start_ap(apdev[0])
@@ -5068,32 +5106,38 @@ def test_ap_wps_encr_oom_ap(dev, apdev):
         dev[0].request("WPS_CANCEL")
     dev[0].wait_disconnected()
 
+@remote_compatible
 def test_ap_wps_encr_no_random_ap(dev, apdev):
     """WPS and no random data available for encryption on AP"""
     hapd = wps_start_ap(apdev[0])
     with fail_test(hapd, 1, "os_get_random;wps_build_encr_settings"):
         wps_run_pbc_fail_ap(apdev[0], dev[0], hapd)
 
+@remote_compatible
 def test_ap_wps_e_hash_no_random_sta(dev, apdev):
     """WPS and no random data available for e-hash on STA"""
     with fail_test(dev[0], 1, "os_get_random;wps_build_e_hash"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_m1_no_random(dev, apdev):
     """WPS and no random for M1 on STA"""
     with fail_test(dev[0], 1, "os_get_random;wps_build_m1"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_m1_oom(dev, apdev):
     """WPS and OOM for M1 on STA"""
     with alloc_fail(dev[0], 1, "wps_build_m1"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_m3_oom(dev, apdev):
     """WPS and OOM for M3 on STA"""
     with alloc_fail(dev[0], 1, "wps_build_m3"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_m5_oom(dev, apdev):
     """WPS and OOM for M5 on STA"""
     hapd = wps_start_ap(apdev[0])
@@ -5109,12 +5153,14 @@ def test_ap_wps_m5_oom(dev, apdev):
             dev[0].wait_disconnected()
     dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_m5_no_random(dev, apdev):
     """WPS and no random for M5 on STA"""
     with fail_test(dev[0], 1,
                    "os_get_random;wps_build_encr_settings;wps_build_m5"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_m7_oom(dev, apdev):
     """WPS and OOM for M7 on STA"""
     hapd = wps_start_ap(apdev[0])
@@ -5130,12 +5176,14 @@ def test_ap_wps_m7_oom(dev, apdev):
             dev[0].wait_disconnected()
     dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_ap_wps_m7_no_random(dev, apdev):
     """WPS and no random for M7 on STA"""
     with fail_test(dev[0], 1,
                    "os_get_random;wps_build_encr_settings;wps_build_m7"):
         wps_run_pbc_fail(apdev[0], dev[0])
 
+@remote_compatible
 def test_ap_wps_wsc_done_oom(dev, apdev):
     """WPS and OOM for WSC_Done on STA"""
     with alloc_fail(dev[0], 1, "wps_build_wsc_done"):
@@ -5797,6 +5845,7 @@ def test_ap_wps_m4_msg_type_m2d(dev, apdev):
     """WPS and M4 but Message Type M2D"""
     wps_m4_but_other(dev[0], apdev[0], "M4/M2D", "06")
 
+@remote_compatible
 def test_ap_wps_config_methods(dev, apdev):
     """WPS configuration method parsing"""
     ssid = "test-wps-conf"
@@ -7734,10 +7783,12 @@ def test_wps_ext_ap_settings_success(dev, apdev):
     ap_settings += build_wsc_attr(ATTR_MAC_ADDR, binascii.unhexlify(apdev[0]['bssid'].replace(':', '')))
     wps_run_ap_settings_proto(dev, apdev, ap_settings, True)
 
+@remote_compatible
 def test_wps_ext_ap_settings_missing(dev, apdev):
     """WPS and AP Settings: missing"""
     wps_run_ap_settings_proto(dev, apdev, None, False)
 
+@remote_compatible
 def test_wps_ext_ap_settings_mac_addr_mismatch(dev, apdev):
     """WPS and AP Settings: MAC Address mismatch"""
     ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
@@ -7748,6 +7799,7 @@ def test_wps_ext_ap_settings_mac_addr_mismatch(dev, apdev):
     ap_settings += build_wsc_attr(ATTR_MAC_ADDR, '\x00\x00\x00\x00\x00\x00')
     wps_run_ap_settings_proto(dev, apdev, ap_settings, True)
 
+@remote_compatible
 def test_wps_ext_ap_settings_mac_addr_missing(dev, apdev):
     """WPS and AP Settings: missing MAC Address"""
     ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
@@ -7757,6 +7809,7 @@ def test_wps_ext_ap_settings_mac_addr_missing(dev, apdev):
     ap_settings += build_wsc_attr(ATTR_NETWORK_KEY, '')
     wps_run_ap_settings_proto(dev, apdev, ap_settings, False)
 
+@remote_compatible
 def test_wps_ext_ap_settings_reject_encr_type(dev, apdev):
     """WPS and AP Settings: reject Encr Type"""
     ap_settings = build_wsc_attr(ATTR_NETWORK_INDEX, '\x01')
@@ -7767,6 +7820,7 @@ def test_wps_ext_ap_settings_reject_encr_type(dev, apdev):
     ap_settings += build_wsc_attr(ATTR_MAC_ADDR, binascii.unhexlify(apdev[0]['bssid'].replace(':', '')))
     wps_run_ap_settings_proto(dev, apdev, ap_settings, False)
 
+@remote_compatible
 def test_wps_ext_ap_settings_m2d(dev, apdev):
     """WPS and AP Settings: M2D"""
     addr,bssid,hapd = wps_start_ext_reg(apdev[0], dev[0])
@@ -7804,6 +7858,7 @@ def wps_wait_ap_nack(hapd, dev, e_nonce, r_nonce):
     send_wsc_msg(hapd, dev.own_addr(), nack)
     dev.wait_disconnected()
 
+@remote_compatible
 def test_wps_ext_m3_missing_e_hash1(dev, apdev):
     """WPS proto: M3 missing E-Hash1"""
     pin = "12345670"
@@ -7848,6 +7903,7 @@ def test_wps_ext_m3_missing_e_hash1(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m3_missing_e_hash2(dev, apdev):
     """WPS proto: M3 missing E-Hash2"""
     pin = "12345670"
@@ -7892,6 +7948,7 @@ def test_wps_ext_m3_missing_e_hash2(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m5_missing_e_snonce1(dev, apdev):
     """WPS proto: M5 missing E-SNonce1"""
     pin = "12345670"
@@ -7951,6 +8008,7 @@ def test_wps_ext_m5_missing_e_snonce1(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m5_e_snonce1_mismatch(dev, apdev):
     """WPS proto: M5 E-SNonce1 mismatch"""
     pin = "12345670"
@@ -8082,6 +8140,7 @@ def test_wps_ext_m7_missing_e_snonce2(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m7_e_snonce2_mismatch(dev, apdev):
     """WPS proto: M7 E-SNonce2 mismatch"""
     pin = "12345670"
@@ -8154,6 +8213,7 @@ def test_wps_ext_m7_e_snonce2_mismatch(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m1_pubkey_oom(dev, apdev):
     """WPS proto: M1 PubKey OOM"""
     pin = "12345670"
@@ -8184,6 +8244,7 @@ def wps_wait_eap_failure(hapd, dev):
         raise Exception("EAP-Failure not reported")
     dev.wait_disconnected()
 
+@remote_compatible
 def test_wps_ext_m3_m1(dev, apdev):
     """WPS proto: M3 replaced with M1"""
     pin = "12345670"
@@ -8228,6 +8289,7 @@ def test_wps_ext_m3_m1(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m5_m3(dev, apdev):
     """WPS proto: M5 replaced with M3"""
     pin = "12345670"
@@ -8286,6 +8348,7 @@ def test_wps_ext_m5_m3(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m3_m2(dev, apdev):
     """WPS proto: M3 replaced with M2"""
     pin = "12345670"
@@ -8328,6 +8391,7 @@ def test_wps_ext_m3_m2(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m3_m5(dev, apdev):
     """WPS proto: M3 replaced with M5"""
     pin = "12345670"
@@ -8372,6 +8436,7 @@ def test_wps_ext_m3_m5(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m3_m7(dev, apdev):
     """WPS proto: M3 replaced with M7"""
     pin = "12345670"
@@ -8416,6 +8481,7 @@ def test_wps_ext_m3_m7(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m3_done(dev, apdev):
     """WPS proto: M3 replaced with WSC_Done"""
     pin = "12345670"
@@ -8457,6 +8523,7 @@ def test_wps_ext_m3_done(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_nack_invalid(dev, apdev):
     """WPS proto: M2 followed by invalid NACK"""
     pin = "12345670"
@@ -8495,6 +8562,7 @@ def test_wps_ext_m2_nack_invalid(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_nack_no_msg_type(dev, apdev):
     """WPS proto: M2 followed by NACK without Msg Type"""
     pin = "12345670"
@@ -8533,6 +8601,7 @@ def test_wps_ext_m2_nack_no_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_nack_invalid_msg_type(dev, apdev):
     """WPS proto: M2 followed by NACK with invalid Msg Type"""
     pin = "12345670"
@@ -8571,6 +8640,7 @@ def test_wps_ext_m2_nack_invalid_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_nack_e_nonce_mismatch(dev, apdev):
     """WPS proto: M2 followed by NACK with e-nonce mismatch"""
     pin = "12345670"
@@ -8609,6 +8679,7 @@ def test_wps_ext_m2_nack_e_nonce_mismatch(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_nack_no_config_error(dev, apdev):
     """WPS proto: M2 followed by NACK without Config Error"""
     pin = "12345670"
@@ -8647,6 +8718,7 @@ def test_wps_ext_m2_nack_no_config_error(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_ack_invalid(dev, apdev):
     """WPS proto: M2 followed by invalid ACK"""
     pin = "12345670"
@@ -8685,6 +8757,7 @@ def test_wps_ext_m2_ack_invalid(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_ack(dev, apdev):
     """WPS proto: M2 followed by ACK"""
     pin = "12345670"
@@ -8722,6 +8795,7 @@ def test_wps_ext_m2_ack(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_ack_no_msg_type(dev, apdev):
     """WPS proto: M2 followed by ACK missing Msg Type"""
     pin = "12345670"
@@ -8760,6 +8834,7 @@ def test_wps_ext_m2_ack_no_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_ack_invalid_msg_type(dev, apdev):
     """WPS proto: M2 followed by ACK with invalid Msg Type"""
     pin = "12345670"
@@ -8798,6 +8873,7 @@ def test_wps_ext_m2_ack_invalid_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m2_ack_e_nonce_mismatch(dev, apdev):
     """WPS proto: M2 followed by ACK with e-nonce mismatch"""
     pin = "12345670"
@@ -8836,6 +8912,7 @@ def test_wps_ext_m2_ack_e_nonce_mismatch(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m1_invalid(dev, apdev):
     """WPS proto: M1 failing parsing"""
     pin = "12345670"
@@ -8947,6 +9024,7 @@ def wps_ext_wsc_done(dev, apdev):
     msg, m8_attrs, raw_m8_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M8)
     return hapd, msg, e_nonce, r_nonce
 
+@remote_compatible
 def test_wps_ext_wsc_done_invalid(dev, apdev):
     """WPS proto: invalid WSC_Done"""
     hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
@@ -8958,6 +9036,7 @@ def test_wps_ext_wsc_done_invalid(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_wsc_done_no_msg_type(dev, apdev):
     """WPS proto: invalid WSC_Done"""
     hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
@@ -8972,6 +9051,7 @@ def test_wps_ext_wsc_done_no_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_wsc_done_wrong_msg_type(dev, apdev):
     """WPS proto: WSC_Done with wrong Msg Type"""
     hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
@@ -8986,6 +9066,7 @@ def test_wps_ext_wsc_done_wrong_msg_type(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_wsc_done_no_e_nonce(dev, apdev):
     """WPS proto: WSC_Done without e_nonce"""
     hapd, msg, e_nonce, r_nonce = wps_ext_wsc_done(dev, apdev)
@@ -9014,6 +9095,7 @@ def test_wps_ext_wsc_done_no_r_nonce(dev, apdev):
 
     wps_wait_eap_failure(hapd, dev[0])
 
+@remote_compatible
 def test_wps_ext_m7_no_encr_settings(dev, apdev):
     """WPS proto: M7 without Encr Settings"""
     pin = "12345670"
@@ -9086,6 +9168,7 @@ def test_wps_ext_m7_no_encr_settings(dev, apdev):
 
     wps_wait_ap_nack(hapd, dev[0], e_nonce, r_nonce)
 
+@remote_compatible
 def test_wps_ext_m1_workaround(dev, apdev):
     """WPS proto: M1 Manufacturer/Model workaround"""
     pin = "12345670"
@@ -9112,6 +9195,7 @@ def test_wps_ext_m1_workaround(dev, apdev):
     logger.debug("Receive M2 from AP")
     msg, m2_attrs, raw_m2_attrs = recv_wsc_msg(hapd, WSC_MSG, WPS_M2)
 
+@remote_compatible
 def test_ap_wps_disable_enable(dev, apdev):
     """WPS and DISABLE/ENABLE AP"""
     hapd = wps_start_ap(apdev[0])
@@ -9281,6 +9365,7 @@ def wait_scan_stopped(dev):
         logger.debug("Waiting for scan to complete")
         time.sleep(0.1)
 
+@remote_compatible
 def test_ap_wps_eap_wsc_errors(dev, apdev):
     """WPS and EAP-WSC error cases"""
     ssid = "test-wps-conf-pin"

tests/hwsim/test_autoscan.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -51,6 +52,7 @@ def test_autoscan_periodic(dev, apdev):
     finally:
         dev[0].request("AUTOSCAN ")
 
+@remote_compatible
 def test_autoscan_exponential(dev, apdev):
     """autoscan_exponential"""
     hostapd.add_ap(apdev[0], { "ssid": "autoscan" })

tests/hwsim/test_cfg80211.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import binascii
@@ -22,6 +23,7 @@ def nl80211_command(dev, cmd, attr):
         raise Exception("nl80211 command failed")
     return binascii.unhexlify(res)
 
+@remote_compatible
 def test_cfg80211_disassociate(dev, apdev):
     """cfg80211 disassociation command"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -93,6 +95,7 @@ def test_cfg80211_tx_frame(dev, apdev, params):
         if freq[1] != "2412":
             raise Exception("Second Action frame on unexpected channel: %s MHz" % freq[1])
 
+@remote_compatible
 def test_cfg80211_wep_key_idx_change(dev, apdev):
     """WEP Shared Key authentication and key index change without deauth"""
     hapd = hostapd.add_ap(apdev[0],
@@ -122,6 +125,7 @@ def test_cfg80211_wep_key_idx_change(dev, apdev):
     dev[0].wait_connected(timeout=10, error="Reassociation timed out")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_cfg80211_hostapd_ext_sta_remove(dev, apdev):
     """cfg80211 DEL_STATION issued externally to hostapd"""
     hapd = hostapd.add_ap(apdev[0],

tests/hwsim/test_dfs.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import os
 import subprocess
 import time
@@ -213,6 +214,7 @@ def test_dfs_radar(dev, apdev):
         subprocess.call(['iw', 'reg', 'set', '00'])
         dev[0].flush_scan_cache()
 
+@remote_compatible
 def test_dfs_radar_on_non_dfs_channel(dev, apdev):
     """DFS radar detection test code on non-DFS channel"""
     params = { "ssid": "radar" }

tests/hwsim/test_ext_password.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 
@@ -14,6 +15,7 @@ from test_ap_hs20 import hs20_ap_params
 from test_ap_hs20 import interworking_select
 from test_ap_hs20 import interworking_connect
 
+@remote_compatible
 def test_ext_password_psk(dev, apdev):
     """External password storage for PSK"""
     params = hostapd.wpa2_params(ssid="ext-pw-psk", passphrase="12345678")

tests/hwsim/test_gas.py

@@ -5,6 +5,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import binascii
 import logging
@@ -298,6 +299,7 @@ def test_gas_comeback_delay(dev, apdev):
         if ev is None:
             raise Exception("Operation timed out")
 
+@remote_compatible
 def test_gas_stop_fetch_anqp(dev, apdev):
     """Stop FETCH_ANQP operation"""
     hapd = start_ap(apdev[0])
@@ -930,6 +932,7 @@ def test_gas_query_deinit(dev, apdev):
     # GAS query has not yet been started.
     wpas.interface_remove("wlan5")
 
+@remote_compatible
 def test_gas_anqp_oom_wpas(dev, apdev):
     """GAS/ANQP query and OOM in wpa_supplicant"""
     hapd = start_ap(apdev[0])

tests/hwsim/test_hapd_ctrl.py

@@ -4,10 +4,12 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import hostapd
 import hwsim_utils
 from utils import skip_with_fips
 
+@remote_compatible
 def test_hapd_ctrl_status(dev, apdev):
     """hostapd ctrl_iface STATUS commands"""
     ssid = "hapd-ctrl"
@@ -31,6 +33,7 @@ def test_hapd_ctrl_status(dev, apdev):
     if driver['addr'] != bssid:
         raise Exception("Unexpected addr")
 
+@remote_compatible
 def test_hapd_ctrl_p2p_manager(dev, apdev):
     """hostapd as P2P Device manager"""
     ssid = "hapd-p2p-mgr"
@@ -51,6 +54,7 @@ def test_hapd_ctrl_p2p_manager(dev, apdev):
     dev[0].wait_disconnected(timeout=5)
     dev[0].wait_connected(timeout=10, error="Re-connection timed out")
 
+@remote_compatible
 def test_hapd_ctrl_sta(dev, apdev):
     """hostapd and STA ctrl_iface commands"""
     ssid = "hapd-ctrl-sta"
@@ -73,6 +77,7 @@ def test_hapd_ctrl_sta(dev, apdev):
     if "FAIL" not in hapd.request("STA-NEXT 00:11:22:33:44"):
         raise Exception("Unexpected STA-NEXT success")
 
+@remote_compatible
 def test_hapd_ctrl_disconnect(dev, apdev):
     """hostapd and disconnection ctrl_iface commands"""
     ssid = "hapd-ctrl"
@@ -98,6 +103,7 @@ def test_hapd_ctrl_disconnect(dev, apdev):
     dev[0].wait_disconnected(timeout=5)
     dev[0].wait_connected(timeout=10, error="Re-connection timed out")
 
+@remote_compatible
 def test_hapd_ctrl_chan_switch(dev, apdev):
     """hostapd and CHAN_SWITCH ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -112,6 +118,7 @@ def test_hapd_ctrl_chan_switch(dev, apdev):
     if "FAIL" not in hapd.request("CHAN_SWITCH 0 2432 center_freq1=123 center_freq2=234 bandwidth=1000 sec_channel_offset=20 ht vht"):
         raise Exception("Unexpected CHAN_SWITCH success")
 
+@remote_compatible
 def test_hapd_ctrl_level(dev, apdev):
     """hostapd and LEVEL ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -120,6 +127,7 @@ def test_hapd_ctrl_level(dev, apdev):
     if "FAIL" not in hapd.request("LEVEL 0"):
         raise Exception("Unexpected LEVEL success on non-monitor interface")
 
+@remote_compatible
 def test_hapd_ctrl_new_sta(dev, apdev):
     """hostapd and NEW_STA ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -132,6 +140,7 @@ def test_hapd_ctrl_new_sta(dev, apdev):
     if "AUTHORIZED" not in hapd.request("STA 00:11:22:33:44:55"):
         raise Exception("Unexpected NEW_STA STA status")
 
+@remote_compatible
 def test_hapd_ctrl_get(dev, apdev):
     """hostapd and GET ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -142,6 +151,7 @@ def test_hapd_ctrl_get(dev, apdev):
     if "FAIL" in hapd.request("GET version"):
         raise Exception("Unexpected GET version failure")
 
+@remote_compatible
 def test_hapd_ctrl_unknown(dev, apdev):
     """hostapd and unknown ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -150,6 +160,7 @@ def test_hapd_ctrl_unknown(dev, apdev):
     if "UNKNOWN COMMAND" not in hapd.request("FOO"):
         raise Exception("Unexpected response")
 
+@remote_compatible
 def test_hapd_ctrl_hs20_wnm_notif(dev, apdev):
     """hostapd and HS20_WNM_NOTIF ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -160,6 +171,7 @@ def test_hapd_ctrl_hs20_wnm_notif(dev, apdev):
     if "FAIL" not in hapd.request("HS20_WNM_NOTIF 00:11:22:33:44:55http://example.com/"):
         raise Exception("Unexpected HS20_WNM_NOTIF success")
 
+@remote_compatible
 def test_hapd_ctrl_hs20_deauth_req(dev, apdev):
     """hostapd and HS20_DEAUTH_REQ ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -172,6 +184,7 @@ def test_hapd_ctrl_hs20_deauth_req(dev, apdev):
     if "FAIL" not in hapd.request("HS20_DEAUTH_REQ 00:11:22:33:44:55 1"):
         raise Exception("Unexpected HS20_DEAUTH_REQ success")
 
+@remote_compatible
 def test_hapd_ctrl_disassoc_imminent(dev, apdev):
     """hostapd and DISASSOC_IMMINENT ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -191,6 +204,7 @@ def test_hapd_ctrl_disassoc_imminent(dev, apdev):
     if ev is None:
         raise Exception("Scan timed out")
 
+@remote_compatible
 def test_hapd_ctrl_ess_disassoc(dev, apdev):
     """hostapd and ESS_DISASSOC ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -243,6 +257,7 @@ def test_hapd_ctrl_set_accept_mac_file(dev, apdev):
     if ev is not None:
         raise Exception("Unexpected disconnection")
 
+@remote_compatible
 def test_hapd_ctrl_set_error_cases(dev, apdev):
     """hostapd and SET error cases"""
     ssid = "hapd-ctrl"
@@ -440,6 +455,7 @@ def test_hapd_ctrl_set_error_cases(dev, apdev):
         if "OK" not in hapd.request("SET " + e):
             raise Exception("Unexpected SET failure: '%s'" % e)
 
+@remote_compatible
 def test_hapd_ctrl_global(dev, apdev):
     """hostapd and GET ctrl_iface command"""
     ssid = "hapd-ctrl"
@@ -516,6 +532,7 @@ def test_hapd_dup_network_global_wpa(dev, apdev):
     if "FAIL" in dst_hapd.request("STA " + addr):
             raise Exception("Could not connect using duplicated wpa params")
 
+@remote_compatible
 def test_hapd_ctrl_log_level(dev, apdev):
     """hostapd ctrl_iface LOG_LEVEL"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -559,6 +576,7 @@ def test_hapd_ctrl_log_level(dev, apdev):
     if "Timestamp: 1" not in level:
         raise Exception("Unexpected timestamp(3): " + level)
 
+@remote_compatible
 def test_hapd_ctrl_disconnect_no_tx(dev, apdev):
     """hostapd disconnecting STA without transmitting Deauth/Disassoc"""
     ssid = "hapd-test"

tests/hwsim/test_hostapd_oom.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -37,6 +38,7 @@ def hostapd_oom_loop(apdev, params, start_func="main"):
         except Exception, e:
             logger.info("Iteration %d - %s" % (i, str(e)))
 
+@remote_compatible
 def test_hostapd_oom_open(dev, apdev):
     """hostapd failing to setup open mode due to OOM"""
     params = { "ssid": "open" }
@@ -48,6 +50,7 @@ def test_hostapd_oom_wpa2_psk(dev, apdev):
     params['wpa_psk_file'] = 'hostapd.wpa_psk'
     hostapd_oom_loop(apdev, params)
 
+@remote_compatible
 def test_hostapd_oom_wpa2_eap(dev, apdev):
     """hostapd failing to setup WPA2-EAP mode due to OOM"""
     params = hostapd.wpa2_eap_params(ssid="test")
@@ -56,6 +59,7 @@ def test_hostapd_oom_wpa2_eap(dev, apdev):
     params['acct_server_shared_secret'] = "radius"
     hostapd_oom_loop(apdev, params)
 
+@remote_compatible
 def test_hostapd_oom_wpa2_eap_radius(dev, apdev):
     """hostapd failing to setup WPA2-EAP mode due to OOM in RADIUS"""
     params = hostapd.wpa2_eap_params(ssid="test")

tests/hwsim/test_ibss.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -348,6 +349,7 @@ def test_ibss_wep(dev):
     connect_ibss_cmd(dev[1], id)
     bssid1 = wait_ibss_connection(dev[1])
 
+@remote_compatible
 def test_ibss_rsn_error_case(dev):
     """IBSS RSN regression test for IBSS_RSN prior IBSS setup"""
     if "FAIL" not in dev[0].request("IBSS_RSN 02:03:04:05:06:07"):

tests/hwsim/test_ieee8021x.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import hmac
 import logging
@@ -133,6 +134,7 @@ def test_ieee8021x_proto(dev, apdev):
         if int(stop[val]) <= int(start[val]):
             raise Exception(val + " did not increase")
 
+@remote_compatible
 def test_ieee8021x_eapol_start(dev, apdev):
     """IEEE 802.1X and EAPOL-Start retransmissions"""
     params = hostapd.radius_params()

tests/hwsim/test_mbo.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 
@@ -59,6 +60,7 @@ def test_mbo_assoc_disallow(dev, apdev, params):
     if "Destination address: " + hapd2.own_addr() in out:
         raise Exception("Association request sent to disallowed AP 2")
 
+@remote_compatible
 def test_mbo_cell_capa_update(dev, apdev):
     """MBO cellular data capability update"""
     ssid = "test-wnm-mbo"
@@ -85,6 +87,7 @@ def test_mbo_cell_capa_update(dev, apdev):
     if sta['mbo_cell_capa'] != '3':
         raise Exception("mbo_cell_capa not updated properly")
 
+@remote_compatible
 def test_mbo_cell_capa_update_pmf(dev, apdev):
     """MBO cellular data capability update with PMF required"""
     ssid = "test-wnm-mbo"
@@ -116,6 +119,7 @@ def test_mbo_cell_capa_update_pmf(dev, apdev):
     if sta['mbo_cell_capa'] != '3':
         raise Exception("mbo_cell_capa not updated properly")
 
+@remote_compatible
 def test_mbo_non_pref_chan(dev, apdev):
     """MBO non-preferred channel list"""
     ssid = "test-wnm-mbo"
@@ -199,6 +203,7 @@ def test_mbo_non_pref_chan(dev, apdev):
     if 'non_pref_chan[0]' in sta:
         raise Exception("Unexpected non_pref_chan[0] value (update 4)")
 
+@remote_compatible
 def test_mbo_sta_supp_op_classes(dev, apdev):
     """MBO STA supported operating classes"""
     ssid = "test-wnm-mbo"

tests/hwsim/test_monitor_interface.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -50,6 +51,7 @@ def test_monitor_iface_multi_bss(dev, apdev):
     dev[0].connect("monitor-iface", key_mgmt="NONE", scan_freq="2412")
     dev[1].connect("bss-2", key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_monitor_iface_unknown_sta(dev, apdev):
     """AP mode monitor interface and Data frame from unknown STA"""
     ssid = "monitor-iface-pmf"

tests/hwsim/test_nfc_p2p.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger(__name__)
@@ -808,6 +809,7 @@ def _test_nfc_p2p_ip_addr_assignment2(dev):
     if res['ip_addr'] == res0['ip_addr']:
         raise Exception("Same IP address assigned to both clients")
 
+@remote_compatible
 def test_nfc_p2p_tag_enable_disable(dev):
     """NFC tag enable/disable for P2P"""
     if "FAIL" in dev[0].request("WPS_NFC_TOKEN NDEF").rstrip():
@@ -827,6 +829,7 @@ def test_nfc_p2p_tag_enable_disable(dev):
     if "OK" not in dev[0].request("P2P_SET nfc_tag 0"):
         raise Exception("Failed to disable NFC Tag for P2P static handover")
 
+@remote_compatible
 def test_nfc_p2p_static_handover_invalid(dev):
     """NFC static handover with invalid contents"""
     logger.info("Unknown OOB GO Neg channel")

tests/hwsim/test_nfc_wps.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import subprocess
 import logging
@@ -34,6 +35,7 @@ def ap_wps_params(ssid):
              "wpa_passphrase": "12345678", "wpa": "2",
              "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}
 
+@remote_compatible
 def test_nfc_wps_password_token_sta(dev, apdev):
     """NFC tag with password token on the station/Enrollee"""
     ssid = "test-wps-nfc-pw-token-conf"
@@ -93,6 +95,7 @@ def test_nfc_wps_config_token_init(dev, apdev):
     dev[0].wait_connected(timeout=15)
     check_wpa2_connection(dev[0], apdev[0], hapd, ssid, mixed=True)
 
+@remote_compatible
 def test_nfc_wps_password_token_sta_init(dev, apdev):
     """Initial AP configuration with first WPS NFC Enrollee"""
     ssid = "test-wps-nfc-pw-token-init"
@@ -112,6 +115,7 @@ def test_nfc_wps_password_token_sta_init(dev, apdev):
     dev[0].wait_connected(timeout=30)
     check_wpa2_connection(dev[0], apdev[0], hapd, ssid, mixed=True)
 
+@remote_compatible
 def test_nfc_wps_password_token_ap(dev, apdev):
     """WPS registrar configuring an AP using AP password token"""
     ssid = "test-wps-nfc-pw-token-init"
@@ -180,6 +184,7 @@ def _test_nfc_wps_handover_init(dev, apdev):
         if "FAIL" not in hapd.request("NFC_GET_HANDOVER_SEL NDEF WPS-CR"):
             raise Exception("Unexpected NFC_GET_HANDOVER_SEL success during OOM")
 
+@remote_compatible
 def test_nfc_wps_handover_errors(dev, apdev):
     """WPS AP NFC handover report error cases"""
     ssid = "test-wps-nfc-handover"
@@ -415,6 +420,7 @@ def start_ap_er(er, ap, ssid):
     er.request("WPS_ER_SET_CONFIG " + ap_uuid + " 0")
     return hapd
 
+@remote_compatible
 def test_nfc_wps_er_pw_token(dev, apdev):
     """WPS NFC password token from Enrollee to ER"""
     try:
@@ -444,6 +450,7 @@ def _test_nfc_wps_er_pw_token(dev, apdev):
     dev[1].wait_connected(timeout=15)
     check_wpa2_connection(dev[1], apdev[0], hapd, ssid)
 
+@remote_compatible
 def test_nfc_wps_er_config_token(dev, apdev):
     """WPS NFC configuration token from ER to Enrollee"""
     try:
@@ -564,6 +571,7 @@ def _test_nfc_wps_er_handover_pk_hash_mismatch_er(dev, apdev):
     if "WPS-FAIL" not in ev:
         raise Exception("Public key hash mismatch not detected")
 
+@remote_compatible
 def test_nfc_invalid_ndef_record(dev, apdev):
     """Invalid NFC NDEF record handling"""
     tests = [ "11223344",

tests/hwsim/test_p2p_autogo.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import subprocess
 import logging
@@ -176,6 +177,7 @@ def test_autogo_m2d(dev):
     if ev is None:
         raise Exception("No M2D event on group interface (2)")
 
+@remote_compatible
 def test_autogo_fail(dev):
     """P2P autonomous GO and incorrect PIN"""
     autogo(dev[0], freq=2412)
@@ -339,6 +341,7 @@ def test_autogo_chan_switch(dev):
     time.sleep(0.1)
     hwsim_utils.test_connectivity_p2p(dev[0], dev[1])
 
+@remote_compatible
 def test_autogo_extra_cred(dev):
     """P2P autonomous GO sending two WPS credentials"""
     if "FAIL" in dev[0].request("SET wps_testing_dummy_cred 1"):
@@ -365,6 +368,7 @@ def test_autogo_ifdown(dev):
     if res['ifname'] not in ev:
         raise Exception("Unexpected group removal event: " + ev)
 
+@remote_compatible
 def test_autogo_start_during_scan(dev):
     """P2P autonomous GO started during ongoing manual scan"""
     try:
@@ -418,6 +422,7 @@ def test_autogo_passphrase_len(dev):
     finally:
         dev[0].request("SET p2p_passphrase_len 8")
 
+@remote_compatible
 def test_autogo_bridge(dev):
     """P2P autonomous GO in a bridge"""
     try:
@@ -451,6 +456,7 @@ def test_autogo_bridge(dev):
         dev[0].cmd_execute(['brctl', 'delbr', 'p2p-br0', '2>', '/dev/null'],
                            shell=True)
 
+@remote_compatible
 def test_presence_req_on_group_interface(dev):
     """P2P_PRESENCE_REQ on group interface"""
     dev[1].global_request("SET p2p_no_group_iface 0")
@@ -528,6 +534,7 @@ def test_autogo_join_auto(dev):
     dev[1].wait_go_ending_session()
     dev[1].flush_scan_cache()
 
+@remote_compatible
 def test_autogo_join_auto_go_neg(dev):
     """P2P_CONNECT-auto fallback to GO Neg"""
     dev[1].flush_scan_cache()
@@ -564,6 +571,7 @@ def test_autogo_join_auto_go_neg(dev):
     dev[1].wait_go_ending_session()
     dev[1].flush_scan_cache()
 
+@remote_compatible
 def test_autogo_join_auto_go_neg_after_seeing_go(dev):
     """P2P_CONNECT-auto fallback to GO Neg after seeing GO"""
     autogo(dev[0], freq=2412)
@@ -709,6 +717,7 @@ def rx_pd_req(dev):
     p2p['freq'] = msg['freq']
     return p2p
 
+@remote_compatible
 def test_autogo_scan(dev):
     """P2P autonomous GO and no P2P IE in Probe Response scan results"""
     addr0 = dev[0].p2p_dev_addr()
@@ -784,6 +793,7 @@ def test_autogo_scan(dev):
     dev[0].remove_group()
     dev[1].wait_go_ending_session()
 
+@remote_compatible
 def test_autogo_join_before_found(dev):
     """P2P client joining a group before having found GO Device Address"""
     dev[0].global_request("SET p2p_no_group_iface 0")

tests/hwsim/test_p2p_channel.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import os
@@ -189,6 +190,7 @@ def test_p2p_channel_avoid(dev):
         dev[0].request("DRIVER_EVENT AVOID_FREQUENCIES")
         dev[1].flush_scan_cache()
 
+@remote_compatible
 def test_autogo_following_bss(dev, apdev):
     """P2P autonomous GO operate on the same channel as station interface"""
     if dev[0].get_mcc() > 1:
@@ -208,6 +210,7 @@ def test_autogo_following_bss(dev, apdev):
         hwsim_utils.test_connectivity(dev[0], hapd)
         dev[0].remove_group(res_go['ifname'])
 
+@remote_compatible
 def test_go_neg_with_bss_connected(dev, apdev):
     """P2P channel selection: GO negotiation when station interface is connected"""
 
@@ -404,6 +407,7 @@ def test_go_neg_forced_freq_diff_than_bss_freq(dev, apdev):
         subprocess.call(['iw', 'reg', 'set', '00'])
         wpas.flush_scan_cache()
 
+@remote_compatible
 def test_go_pref_chan_bss_on_diff_chan(dev, apdev):
     """P2P channel selection: Station on different channel than GO configured pref channel"""
 
@@ -446,6 +450,7 @@ def test_go_pref_chan_bss_on_disallowed_chan(dev, apdev):
             wpas.global_request("P2P_SET disallow_freq ")
             wpas.global_request("SET p2p_pref_chan ")
 
+@remote_compatible
 def test_no_go_freq(dev, apdev):
     """P2P channel selection: no GO freq"""
     try:
@@ -476,6 +481,7 @@ def test_no_go_freq(dev, apdev):
     finally:
        dev[0].global_request("SET p2p_no_go_freq ")
 
+@remote_compatible
 def test_go_neg_peers_force_diff_freq(dev, apdev):
     """P2P channel selection when peers for different frequency"""
     try:
@@ -485,6 +491,7 @@ def test_go_neg_peers_force_diff_freq(dev, apdev):
         return
     raise Exception("Unexpected group formation success")
 
+@remote_compatible
 def test_autogo_random_channel(dev, apdev):
     """P2P channel selection: GO instantiated on random channel 1, 6, 11"""
     freqs = []
@@ -501,6 +508,7 @@ def test_autogo_random_channel(dev, apdev):
     if i == 20:
        raise Exception("GO created 20 times and not all social channels were selected. freqs not selected: " + str(list(set(go_freqs) - set(freqs))))
 
+@remote_compatible
 def test_p2p_autogo_pref_chan_disallowed(dev, apdev):
     """P2P channel selection: GO preferred channels are disallowed"""
     try:

tests/hwsim/test_p2p_concurrency.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import subprocess
@@ -15,6 +16,7 @@ from p2p_utils import *
 from test_ap_ht import clear_scan_cache
 from utils import HwsimSkip
 
+@remote_compatible
 def test_concurrent_autogo(dev, apdev):
     """Concurrent P2P autonomous GO"""
     logger.info("Connect to an infrastructure AP")
@@ -130,6 +132,7 @@ def test_concurrent_autogo_crossconnect(dev, apdev):
         raise Exception("Timeout on cross connection disabled event")
     dev[0].global_request("P2P_SET cross_connect 0")
 
+@remote_compatible
 def test_concurrent_p2pcli(dev, apdev):
     """Concurrent P2P client join"""
     logger.info("Connect to an infrastructure AP")
@@ -151,6 +154,7 @@ def test_concurrent_p2pcli(dev, apdev):
     logger.info("Confirm AP connection after P2P group removal")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_grpform_go(dev, apdev):
     """Concurrent P2P group formation to become GO"""
     logger.info("Connect to an infrastructure AP")
@@ -169,6 +173,7 @@ def test_concurrent_grpform_go(dev, apdev):
     logger.info("Confirm AP connection after P2P group removal")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_grpform_cli(dev, apdev):
     """Concurrent P2P group formation to become P2P Client"""
     logger.info("Connect to an infrastructure AP")
@@ -187,6 +192,7 @@ def test_concurrent_grpform_cli(dev, apdev):
     logger.info("Confirm AP connection after P2P group removal")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_grpform_while_connecting(dev, apdev):
     """Concurrent P2P group formation while connecting to an AP"""
     logger.info("Start connection to an infrastructure AP")
@@ -204,6 +210,7 @@ def test_concurrent_grpform_while_connecting(dev, apdev):
     logger.info("Confirm AP connection after P2P group removal")
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_grpform_while_connecting2(dev, apdev):
     """Concurrent P2P group formation while connecting to an AP (2)"""
     logger.info("Start connection to an infrastructure AP")
@@ -223,6 +230,7 @@ def test_concurrent_grpform_while_connecting2(dev, apdev):
     dev[0].wait_completed()
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_grpform_while_connecting3(dev, apdev):
     """Concurrent P2P group formation while connecting to an AP (3)"""
     logger.info("Start connection to an infrastructure AP")
@@ -241,6 +249,7 @@ def test_concurrent_grpform_while_connecting3(dev, apdev):
     dev[0].wait_completed()
     hwsim_utils.test_connectivity(dev[0], hapd)
 
+@remote_compatible
 def test_concurrent_persistent_group(dev, apdev):
     """Concurrent P2P persistent group"""
     logger.info("Connect to an infrastructure AP")

tests/hwsim/test_p2p_discovery.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import os
@@ -15,6 +16,7 @@ from p2p_utils import *
 from test_gas import start_ap
 from test_cfg80211 import nl80211_remain_on_channel
 
+@remote_compatible
 def test_discovery(dev):
     """P2P device discovery and provision discovery"""
     addr0 = dev[0].p2p_dev_addr()
@@ -97,6 +99,7 @@ def test_discovery(dev):
     if "FAIL" not in dev[0].global_request("P2P_PROV_DISC 00:11:22:33:44:55 foo"):
         raise Exception("Invalid P2P_PROV_DISC accepted")
 
+@remote_compatible
 def test_discovery_pd_retries(dev):
     """P2P device discovery and provision discovery retries"""
     addr0 = dev[0].p2p_dev_addr()
@@ -211,6 +214,7 @@ def _test_discovery_ctrl_char_in_devname(dev):
     if devname != "Device_B":
         raise Exception("Unexpected device_name from peer: " + devname)
 
+@remote_compatible
 def test_discovery_dev_type(dev):
     """P2P device discovery with Device Type filter"""
     dev[1].request("SET sec_device_type 1-0050F204-2")
@@ -492,6 +496,7 @@ def test_p2p_listen_and_offchannel_tx(dev):
     dev[2].p2p_stop_find()
     dev[0].p2p_stop_find()
 
+@remote_compatible
 def test_p2p_listen_and_scan(dev):
     """P2P_LISTEN and scan"""
     dev[0].p2p_listen()
@@ -536,6 +541,7 @@ def test_p2p_config_methods(dev):
 
     wpas.p2p_stop_find()
 
+@remote_compatible
 def test_discovery_after_gas(dev, apdev):
     """P2P device discovery after GAS/ANQP exchange"""
     hapd = start_ap(apdev[0])
@@ -561,6 +567,7 @@ def test_discovery_after_gas(dev, apdev):
     if end - start > 1.3:
         raise Exception("Device discovery took unexpectedly long time")
 
+@remote_compatible
 def test_discovery_listen_find(dev):
     """P2P_LISTEN immediately followed by P2P_FIND"""
     # Request an external remain-on-channel operation to delay start of the ROC

tests/hwsim/test_p2p_ext.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import os
@@ -11,6 +12,7 @@ import os
 from tshark import run_tshark
 from p2p_utils import *
 
+@remote_compatible
 def test_p2p_ext_discovery(dev):
     """P2P device discovery with vendor specific extensions"""
     addr0 = dev[0].p2p_dev_addr()
@@ -71,6 +73,7 @@ def test_p2p_ext_discovery(dev):
     finally:
         dev[0].request("VENDOR_ELEM_REMOVE 1 *")
 
+@remote_compatible
 def test_p2p_ext_discovery_go(dev):
     """P2P device discovery with vendor specific extensions for GO"""
     addr0 = dev[0].p2p_dev_addr()

tests/hwsim/test_p2p_grpform.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import logging
 logger = logging.getLogger()
@@ -19,6 +20,7 @@ from wpasupplicant import WpaSupplicant
 from p2p_utils import *
 from test_p2p_messages import parse_p2p_public_action, p2p_hdr, p2p_attr_capability, p2p_attr_go_intent, p2p_attr_config_timeout, p2p_attr_listen_channel, p2p_attr_intended_interface_addr, p2p_attr_channel_list, p2p_attr_device_info, p2p_attr_operating_channel, ie_p2p, ie_wsc, mgmt_tx, P2P_GO_NEG_REQ
 
+@remote_compatible
 def test_grpform(dev):
     """P2P group formation using PIN and authorized connection (init -> GO)"""
     try:
@@ -85,6 +87,7 @@ def test_grpform_c(dev):
     if r_res['ifname'] in utils.get_ifnames():
         raise Exception("Group interface netdev was not removed")
 
+@remote_compatible
 def test_grpform2(dev):
     """P2P group formation using PIN and authorized connection (resp -> GO)"""
     go_neg_pin_authorized(i_dev=dev[0], i_intent=0, r_dev=dev[1], r_intent=15)
@@ -101,6 +104,7 @@ def test_grpform2_c(dev):
     if r_res['ifname'] in utils.get_ifnames():
         raise Exception("Group interface netdev was not removed")
 
+@remote_compatible
 def test_grpform3(dev):
     """P2P group formation using PIN and re-init GO Negotiation"""
     go_neg_pin(i_dev=dev[0], i_intent=15, r_dev=dev[1], r_intent=0)
@@ -117,6 +121,7 @@ def test_grpform3_c(dev):
     if r_res['ifname'] in utils.get_ifnames():
         raise Exception("Group interface netdev was not removed")
 
+@remote_compatible
 def test_grpform4(dev):
     """P2P group formation response during p2p_find"""
     addr1 = dev[1].p2p_dev_addr()
@@ -132,6 +137,7 @@ def test_grpform4(dev):
     dev[1].p2p_stop_find()
     dev[0].p2p_stop_find()
 
+@remote_compatible
 def test_grpform_pbc(dev):
     """P2P group formation using PBC and re-init GO Negotiation"""
     [i_res, r_res] = go_neg_pbc(i_dev=dev[0], i_intent=15, r_dev=dev[1], r_intent=0)
@@ -140,6 +146,7 @@ def test_grpform_pbc(dev):
         raise Exception("Unexpected device roles")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_grpform_pd(dev):
     """P2P group formation with PD-before-GO-Neg workaround"""
     [i_res, r_res] = go_neg_pbc(i_dev=dev[0], provdisc=True, r_dev=dev[1], r_listen=True)
@@ -236,18 +243,22 @@ def _test_grpform_ext_listen_oper(dev):
     if not found:
         raise Exception("Could not discover peer that was supposed to use extended listen")
 
+@remote_compatible
 def test_both_go_intent_15(dev):
     """P2P GO Negotiation with both devices using GO intent 15"""
     go_neg_pin_authorized(i_dev=dev[0], i_intent=15, r_dev=dev[1], r_intent=15, expect_failure=True, i_go_neg_status=9)
 
+@remote_compatible
 def test_both_go_neg_display(dev):
     """P2P GO Negotiation with both devices trying to display PIN"""
     go_neg_pin_authorized(i_dev=dev[0], r_dev=dev[1], expect_failure=True, i_go_neg_status=10, i_method='display', r_method='display')
 
+@remote_compatible
 def test_both_go_neg_enter(dev):
     """P2P GO Negotiation with both devices trying to enter PIN"""
     go_neg_pin_authorized(i_dev=dev[0], r_dev=dev[1], expect_failure=True, i_go_neg_status=10, i_method='enter', r_method='enter')
 
+@remote_compatible
 def test_go_neg_pbc_vs_pin(dev):
     """P2P GO Negotiation with one device using PBC and the other PIN"""
     addr0 = dev[0].p2p_dev_addr()
@@ -268,6 +279,7 @@ def test_go_neg_pbc_vs_pin(dev):
     if "status=10" not in ev:
         raise Exception("Unexpected failure reason: " + ev)
 
+@remote_compatible
 def test_go_neg_pin_vs_pbc(dev):
     """P2P GO Negotiation with one device using PIN and the other PBC"""
     addr0 = dev[0].p2p_dev_addr()
@@ -324,6 +336,7 @@ def test_grpform_per_sta_psk_wps(dev):
     dev[2].request("DISCONNECT")
     dev[1].wait_go_ending_session()
 
+@remote_compatible
 def test_grpform_force_chan_go(dev):
     """P2P group formation forced channel selection by GO"""
     [i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=15,
@@ -335,6 +348,7 @@ def test_grpform_force_chan_go(dev):
         raise Exception("Unexpected channel - did not follow GO's forced channel")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_grpform_force_chan_cli(dev):
     """P2P group formation forced channel selection by client"""
     [i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=0,
@@ -346,12 +360,14 @@ def test_grpform_force_chan_cli(dev):
         raise Exception("Unexpected channel - did not follow GO's forced channel")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_grpform_force_chan_conflict(dev):
     """P2P group formation fails due to forced channel mismatch"""
     go_neg_pin_authorized(i_dev=dev[0], i_intent=0, i_freq=2422,
                           r_dev=dev[1], r_intent=15, r_freq=2427,
                           expect_failure=True, i_go_neg_status=7)
 
+@remote_compatible
 def test_grpform_pref_chan_go(dev):
     """P2P group formation preferred channel selection by GO"""
     try:
@@ -366,6 +382,7 @@ def test_grpform_pref_chan_go(dev):
     finally:
         dev[0].request("SET p2p_pref_chan ")
 
+@remote_compatible
 def test_grpform_pref_chan_go_overridden(dev):
     """P2P group formation preferred channel selection by GO overridden by client"""
     try:
@@ -381,6 +398,7 @@ def test_grpform_pref_chan_go_overridden(dev):
     finally:
         dev[1].request("SET p2p_pref_chan ")
 
+@remote_compatible
 def test_grpform_no_go_freq_forcing_chan(dev):
     """P2P group formation with no-GO freq forcing channel"""
     try:
@@ -395,6 +413,7 @@ def test_grpform_no_go_freq_forcing_chan(dev):
     finally:
         dev[1].request("SET p2p_no_go_freq ")
 
+@remote_compatible
 def test_grpform_no_go_freq_conflict(dev):
     """P2P group formation fails due to no-GO range forced by client"""
     try:
@@ -405,6 +424,7 @@ def test_grpform_no_go_freq_conflict(dev):
     finally:
         dev[1].request("SET p2p_no_go_freq ")
 
+@remote_compatible
 def test_grpform_no_5ghz_world_roaming(dev):
     """P2P group formation with world roaming regulatory"""
     [i_res, r_res] = go_neg_pin_authorized(i_dev=dev[0], i_intent=0,
@@ -415,6 +435,7 @@ def test_grpform_no_5ghz_world_roaming(dev):
         raise Exception("Unexpected channel - did not follow world roaming rules")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_grpform_no_5ghz_add_cli(dev):
     """P2P group formation with passive scan 5 GHz and p2p_add_cli_chan=1"""
     try:
@@ -431,6 +452,7 @@ def test_grpform_no_5ghz_add_cli(dev):
         dev[0].request("SET p2p_add_cli_chan 0")
         dev[1].request("SET p2p_add_cli_chan 0")
 
+@remote_compatible
 def test_grpform_no_5ghz_add_cli2(dev):
     """P2P group formation with passive scan 5 GHz and p2p_add_cli_chan=1 (reverse)"""
     try:
@@ -447,6 +469,7 @@ def test_grpform_no_5ghz_add_cli2(dev):
         dev[0].request("SET p2p_add_cli_chan 0")
         dev[1].request("SET p2p_add_cli_chan 0")
 
+@remote_compatible
 def test_grpform_no_5ghz_add_cli3(dev):
     """P2P group formation with passive scan 5 GHz and p2p_add_cli_chan=1 (intent 15)"""
     try:
@@ -463,6 +486,7 @@ def test_grpform_no_5ghz_add_cli3(dev):
         dev[0].request("SET p2p_add_cli_chan 0")
         dev[1].request("SET p2p_add_cli_chan 0")
 
+@remote_compatible
 def test_grpform_no_5ghz_add_cli4(dev):
     """P2P group formation with passive scan 5 GHz and p2p_add_cli_chan=1 (reverse; intent 15)"""
     try:
@@ -479,6 +503,7 @@ def test_grpform_no_5ghz_add_cli4(dev):
         dev[0].request("SET p2p_add_cli_chan 0")
         dev[1].request("SET p2p_add_cli_chan 0")
 
+@remote_compatible
 def test_grpform_incorrect_pin(dev):
     """P2P GO Negotiation with incorrect PIN"""
     dev[1].p2p_listen()
@@ -513,6 +538,7 @@ def test_grpform_incorrect_pin(dev):
     if ev is None:
         raise Exception("Group formation failure timed out")
 
+@remote_compatible
 def test_grpform_reject(dev):
     """User rejecting group formation attempt by a P2P peer"""
     addr0 = dev[0].p2p_dev_addr()
@@ -533,6 +559,7 @@ def test_grpform_reject(dev):
     if "status=11" not in ev:
         raise Exception("Unexpected status code in rejection")
 
+@remote_compatible
 def test_grpform_pd_no_probe_resp(dev):
     """GO Negotiation after PD, but no Probe Response"""
     addr0 = dev[0].p2p_dev_addr()
@@ -618,6 +645,7 @@ def clear_pbc_overlap(dev, ap):
     dev[1].flush_scan_cache()
     time.sleep(0.1)
 
+@remote_compatible
 def test_grpform_pbc_overlap(dev, apdev):
     """P2P group formation during PBC overlap"""
     params = { "ssid": "wps", "eap_server": "1", "wps_state": "1" }
@@ -655,6 +683,7 @@ def test_grpform_pbc_overlap(dev, apdev):
 
     clear_pbc_overlap(dev, apdev[0])
 
+@remote_compatible
 def test_grpform_pbc_overlap_group_iface(dev, apdev):
     """P2P group formation during PBC overlap using group interfaces"""
     # Note: Need to include P2P IE from the AP to get the P2P interface BSS
@@ -693,6 +722,7 @@ def test_grpform_pbc_overlap_group_iface(dev, apdev):
 
     clear_pbc_overlap(dev, apdev[0])
 
+@remote_compatible
 def test_grpform_goneg_fail_with_group_iface(dev):
     """P2P group formation fails while using group interface"""
     dev[0].request("SET p2p_no_group_iface 0")
@@ -818,6 +848,7 @@ def test_grpform_no_wsc_done(dev):
         if mode != "P2P GO - group formation":
             raise Exception("Unexpected mode on GO during group formation: " + mode)
 
+@remote_compatible
 def test_grpform_wait_peer(dev):
     """P2P group formation wait for peer to become ready"""
     addr0 = dev[0].p2p_dev_addr()
@@ -842,6 +873,7 @@ def test_grpform_wait_peer(dev):
         raise Exception("Group formation timed out")
     dev[0].remove_group()
 
+@remote_compatible
 def test_invalid_p2p_connect_command(dev):
     """P2P_CONNECT error cases"""
     id = dev[0].add_network()
@@ -864,6 +896,7 @@ def test_invalid_p2p_connect_command(dev):
     if "FAIL-CHANNEL-UNSUPPORTED" not in dev[0].request("P2P_CONNECT 00:11:22:33:44:55 pin freq=3000"):
         raise Exception("Unsupported channel not reported")
 
+@remote_compatible
 def test_p2p_unauthorize(dev):
     """P2P_UNAUTHORIZE to unauthorize a peer"""
     if "FAIL" not in dev[0].request("P2P_UNAUTHORIZE foo"):
@@ -884,6 +917,7 @@ def test_p2p_unauthorize(dev):
     if ev is None:
         raise Exception("No GO Negotiation Request RX reported")
 
+@remote_compatible
 def test_grpform_pbc_multiple(dev):
     """P2P group formation using PBC multiple times in a row"""
     try:
@@ -936,6 +970,7 @@ def test_grpform_not_ready2(dev):
     for i in range(3):
         dev[i].p2p_stop_find()
 
+@remote_compatible
 def test_grpform_and_scan(dev):
     """GO Negotiation and scan operations"""
     addr0 = dev[0].p2p_dev_addr()
@@ -1108,6 +1143,7 @@ def test_grpform_go_neg_dup_on_restart(dev):
     lower.dump_monitor()
     higher.dump_monitor()
 
+@remote_compatible
 def test_grpform_go_neg_stopped(dev):
     """GO Negotiation stopped after TX start"""
     addr0 = dev[0].p2p_dev_addr()

tests/hwsim/test_p2p_invitation.py

@@ -4,11 +4,13 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 
 import hwsim_utils
 
+@remote_compatible
 def test_p2p_go_invite(dev):
     """P2P GO inviting a client to join"""
     addr0 = dev[0].p2p_dev_addr()
@@ -53,6 +55,7 @@ def test_p2p_go_invite(dev):
     dev[0].remove_group()
     dev[1].wait_go_ending_session()
 
+@remote_compatible
 def test_p2p_go_invite_auth(dev):
     """P2P GO inviting a client to join (authorized invitation)"""
     addr0 = dev[0].p2p_dev_addr()
@@ -104,6 +107,7 @@ def test_p2p_go_invite_auth(dev):
     dev[0].remove_group()
     dev[1].wait_go_ending_session()
 
+@remote_compatible
 def test_p2p_go_invite_unknown(dev):
     """P2P GO inviting a client that has not discovered the GO"""
     try:
@@ -176,6 +180,7 @@ def test_p2p_cli_invite(dev):
     dev[1].wait_go_ending_session()
     dev[2].wait_go_ending_session()
 
+@remote_compatible
 def test_p2p_invite_invalid(dev):
     """Invalid parameters to P2P_INVITE"""
     id = dev[0].add_network()

tests/hwsim/test_p2p_messages.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import struct
 import time
@@ -219,12 +220,14 @@ def parse_p2p_public_action(payload):
 
     return p2p
 
+@remote_compatible
 def test_p2p_msg_empty(dev, apdev):
     """P2P protocol test: empty P2P Public Action frame"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
     msg = p2p_hdr(dst, src)
     hapd.mgmt_tx(msg)
 
+@remote_compatible
 def test_p2p_msg_long_ssid(dev, apdev):
     """P2P protocol test: Too long SSID in P2P Public Action frame"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
@@ -244,6 +247,7 @@ def test_p2p_msg_long_ssid(dev, apdev):
     if ev is None:
         raise Exception("Timeout on device found event")
 
+@remote_compatible
 def test_p2p_msg_long_dev_name(dev, apdev):
     """P2P protocol test: Too long Device Name in P2P Public Action frame"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
@@ -835,6 +839,7 @@ def test_p2p_msg_invitation_req_to_go(dev, apdev):
     if p2p['p2p_status'] != 7 and dev[1].get_mcc() <= 1:
         raise Exception("Unexpected status %d" % p2p['p2p_status'])
 
+@remote_compatible
 def test_p2p_msg_invitation_req_unknown(dev, apdev):
     """P2P protocol tests for invitation request from unknown peer"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
@@ -857,6 +862,7 @@ def test_p2p_msg_invitation_req_unknown(dev, apdev):
     if hapd.mgmt_rx(timeout=1) is None:
         raise Exception("No invitation response " + str(dialog_token))
 
+@remote_compatible
 def test_p2p_msg_invitation_no_common_channels(dev, apdev):
     """P2P protocol tests for invitation request without common channels"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
@@ -1119,6 +1125,7 @@ def test_p2p_msg_invitation_resend_duplicate(dev, apdev):
     dev[0].group_form_result(ev)
     dev[0].remove_group()
 
+@remote_compatible
 def test_p2p_msg_pd_req(dev, apdev):
     """P2P protocol tests for provision discovery request processing"""
     dst, src, hapd, channel = start_p2p(dev, apdev)
@@ -1940,6 +1947,7 @@ def gas_hdr(dst, src, type, req=True, dialog_token=0):
                                      dialog_token)
     return msg
 
+@remote_compatible
 def test_p2p_msg_sd(dev, apdev):
     """P2P protocol tests for service discovery messages"""
     dst, src, hapd, channel = start_p2p(dev, apdev)

tests/hwsim/test_p2p_persistent.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import re
@@ -12,6 +13,7 @@ import time
 import hwsim_utils
 from p2p_utils import *
 
+@remote_compatible
 def test_persistent_group(dev):
     """P2P persistent group formation and re-invocation"""
     form(dev[0], dev[1])
@@ -56,12 +58,14 @@ def test_persistent_group(dev):
     if dev[1].p2p_dev_addr() in clients:
         raise Exception("Peer was still in client list")
 
+@remote_compatible
 def test_persistent_group2(dev):
     """P2P persistent group formation with reverse roles"""
     form(dev[0], dev[1], reverse_init=True)
     invite_from_cli(dev[0], dev[1])
     invite_from_go(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group3(dev):
     """P2P persistent group formation and re-invocation with empty BSS table"""
     form(dev[0], dev[1])
@@ -259,6 +263,7 @@ def test_persistent_group_invite_removed_client(dev):
 
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_channel(dev):
     """P2P persistent group re-invocation with channel selection"""
     form(dev[0], dev[1], test_data=False)
@@ -284,6 +289,7 @@ def test_persistent_group_channel(dev):
         raise Exception("Persistent group client channel preference not followed")
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_and_role_change(dev):
     """P2P persistent group, auto GO in another role, and re-invocation"""
     form(dev[0], dev[1])
@@ -352,6 +358,7 @@ def test_persistent_go_client_list(dev):
     if 'persistent' not in peer or peer['persistent'] != id:
         raise Exception("Persistent group client not recognized(2)")
 
+@remote_compatible
 def test_persistent_group_in_grpform(dev):
     """P2P persistent group parameters re-used in group formation"""
     addr0 = dev[0].p2p_dev_addr()
@@ -373,6 +380,7 @@ def test_persistent_group_in_grpform(dev):
     logger.debug("i_res: " + str(i_res))
     logger.debug("r_res: " + str(r_res))
 
+@remote_compatible
 def test_persistent_group_without_persistent_reconnect(dev):
     """P2P persistent group re-invocation without persistent reconnect"""
     form(dev[0], dev[1])
@@ -447,6 +455,7 @@ def test_persistent_group_without_persistent_reconnect(dev):
     [go_res, cli_res] = check_result(dev[0], dev[1])
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_already_running(dev):
     """P2P persistent group formation and invitation while GO already running"""
     form(dev[0], dev[1])
@@ -463,6 +472,7 @@ def test_persistent_group_already_running(dev):
         raise Exception("Could not state GO")
     invite_from_cli(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_add_cli_chan(dev):
     """P2P persistent group formation and re-invocation with p2p_add_cli_chan=1"""
     try:
@@ -480,6 +490,7 @@ def test_persistent_group_add_cli_chan(dev):
         dev[0].request("SET p2p_add_cli_chan 0")
         dev[1].request("SET p2p_add_cli_chan 0")
 
+@remote_compatible
 def test_persistent_invalid_group_add(dev):
     """Invalid P2P_GROUP_ADD command"""
     id = dev[0].add_network()
@@ -538,6 +549,7 @@ def test_persistent_group_missed_inv_resp(dev):
 
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_profile_add(dev):
     """Create a P2P persistent group with ADD_NETWORK"""
     passphrase="passphrase here"
@@ -558,6 +570,7 @@ def test_persistent_group_profile_add(dev):
     dev[0].remove_group()
     dev[1].wait_go_ending_session()
 
+@remote_compatible
 def test_persistent_group_cancel_on_cli(dev):
     """P2P persistent group formation, re-invocation, and cancel"""
     dev[0].global_request("SET p2p_no_group_iface 0")
@@ -578,6 +591,7 @@ def test_persistent_group_cancel_on_cli(dev):
         raise Exception("P2P_CANCEL succeeded unexpectedly on GO")
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_cancel_on_cli2(dev):
     """P2P persistent group formation, re-invocation, and cancel (2)"""
     form(dev[0], dev[1])
@@ -595,6 +609,7 @@ def test_persistent_group_cancel_on_cli2(dev):
         raise Exception("P2P_CANCEL succeeded unexpectedly on GO")
     terminate_group(dev[0], dev[1])
 
+@remote_compatible
 def test_persistent_group_peer_dropped(dev):
     """P2P persistent group formation and re-invocation with peer having dropped group"""
     form(dev[0], dev[1], reverse_init=True)
@@ -615,6 +630,7 @@ def test_persistent_group_peer_dropped(dev):
     logger.info("Verify that a new group can be formed")
     form(dev[0], dev[1], reverse_init=True)
 
+@remote_compatible
 def test_persistent_group_peer_dropped2(dev):
     """P2P persistent group formation and re-invocation with peer having dropped group (2)"""
     form(dev[0], dev[1])

tests/hwsim/test_p2p_service.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -87,6 +88,7 @@ def run_sd(dev, dst, query, exp_query=None, fragment=False, query2=None):
 
     return ev
 
+@remote_compatible
 def test_p2p_service_discovery(dev):
     """P2P service discovery"""
     addr0 = dev[0].p2p_dev_addr()
@@ -132,6 +134,7 @@ def test_p2p_service_discovery4(dev):
         if "496e7465726e6574" not in ev:
             raise Exception("Unexpected service discovery response contents (UPnP)")
 
+@remote_compatible
 def test_p2p_service_discovery_multiple_queries(dev):
     """P2P service discovery with multiple queries"""
     for dst in [ "00:00:00:00:00:00", dev[0].p2p_dev_addr() ]:
@@ -161,6 +164,7 @@ def test_p2p_service_discovery_fragmentation(dev):
             if "496e7465726e6574" not in ev:
                 raise Exception("Unexpected service discovery response contents (UPnP)")
 
+@remote_compatible
 def test_p2p_service_discovery_bonjour(dev):
     """P2P service discovery (Bonjour)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "02000101")
@@ -171,6 +175,7 @@ def test_p2p_service_discovery_bonjour(dev):
     if "496e7465726e6574" in ev:
         raise Exception("Unexpected service discovery response contents (UPnP not expected)")
 
+@remote_compatible
 def test_p2p_service_discovery_bonjour2(dev):
     """P2P service discovery (Bonjour AFS)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "130001010b5f6166706f766572746370c00c000c01")
@@ -181,6 +186,7 @@ def test_p2p_service_discovery_bonjour2(dev):
     if "496e7465726e6574" in ev:
         raise Exception("Unexpected service discovery response contents (UPnP not expected)")
 
+@remote_compatible
 def test_p2p_service_discovery_bonjour3(dev):
     """P2P service discovery (Bonjour AFS - no match)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "130001010b5f6166706f766572746370c00c000c02")
@@ -193,6 +199,7 @@ def test_p2p_service_discovery_bonjour3(dev):
     if "496e7465726e6574" in ev:
         raise Exception("Unexpected service discovery response contents (UPnP not expected)")
 
+@remote_compatible
 def test_p2p_service_discovery_upnp(dev):
     """P2P service discovery (UPnP)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "02000201")
@@ -201,6 +208,7 @@ def test_p2p_service_discovery_upnp(dev):
     if "496e7465726e6574" not in ev:
         raise Exception("Unexpected service discovery response contents (UPnP)")
 
+@remote_compatible
 def test_p2p_service_discovery_upnp2(dev):
     """P2P service discovery (UPnP using request helper)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "upnp 10 ssdp:all", "0b00020110737364703a616c6c")
@@ -209,6 +217,7 @@ def test_p2p_service_discovery_upnp2(dev):
     if "496e7465726e6574" not in ev:
         raise Exception("Unexpected service discovery response contents (UPnP)")
 
+@remote_compatible
 def test_p2p_service_discovery_upnp3(dev):
     """P2P service discovery (UPnP using request helper - no match)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "upnp 10 ssdp:foo", "0b00020110737364703a666f6f")
@@ -219,6 +228,7 @@ def test_p2p_service_discovery_upnp3(dev):
     if "496e7465726e6574" in ev:
         raise Exception("Unexpected service discovery response contents (UPnP)")
 
+@remote_compatible
 def test_p2p_service_discovery_ws(dev):
     """P2P service discovery (WS-Discovery)"""
     ev = run_sd(dev, "00:00:00:00:00:00", "02000301")
@@ -229,6 +239,7 @@ def test_p2p_service_discovery_ws(dev):
     if "0300030101" not in ev:
         raise Exception("Unexpected service discovery response contents (WS)")
 
+@remote_compatible
 def test_p2p_service_discovery_wfd(dev):
     """P2P service discovery (Wi-Fi Display)"""
     dev[0].global_request("SET wifi_display 1")
@@ -240,6 +251,7 @@ def test_p2p_service_discovery_wfd(dev):
     if "0300040101" not in ev:
         raise Exception("Unexpected response to WFD SD query (protocol was disabled)")
 
+@remote_compatible
 def test_p2p_service_discovery_req_cancel(dev):
     """Cancel a P2P service discovery request"""
     if "FAIL" not in dev[0].global_request("P2P_SERV_DISC_CANCEL_REQ ab"):
@@ -263,6 +275,7 @@ def test_p2p_service_discovery_req_cancel(dev):
     if "OK" not in dev[0].global_request("P2P_SERV_DISC_CANCEL_REQ " + query):
         raise Exception("Unexpected SD(broadcast) cancel failure")
 
+@remote_compatible
 def test_p2p_service_discovery_go(dev):
     """P2P service discovery from GO"""
     addr0 = dev[0].p2p_dev_addr()
@@ -387,6 +400,7 @@ def _test_p2p_service_discovery_external(dev):
         if "FAIL" not in dev[0].global_request("P2P_SERV_DISC_RESP " + cmd):
             raise Exception("Invalid P2P_SERV_DISC_RESP accepted: " + cmd)
 
+@remote_compatible
 def test_p2p_service_discovery_external(dev):
     """P2P service discovery using external response"""
     try:
@@ -394,6 +408,7 @@ def test_p2p_service_discovery_external(dev):
     finally:
         dev[0].global_request("P2P_SERV_DISC_EXTERNAL 0")
 
+@remote_compatible
 def test_p2p_service_discovery_invalid_commands(dev):
     """P2P service discovery invalid commands"""
     for cmd in [ "bonjour",
@@ -454,6 +469,7 @@ def get_p2p_state(dev):
         raise Exception("Could not get p2p_state")
     return p2p_state
 
+@remote_compatible
 def test_p2p_service_discovery_peer_not_listening(dev):
     """P2P service discovery and peer not listening"""
     addr0 = dev[0].p2p_dev_addr()
@@ -483,6 +499,7 @@ def test_p2p_service_discovery_peer_not_listening(dev):
     if p2p_state != "IDLE":
         raise Exception("Unexpected p2p_state after P2P_FIND timeout: " + p2p_state)
 
+@remote_compatible
 def test_p2p_service_discovery_peer_not_listening2(dev):
     """P2P service discovery and peer not listening"""
     addr0 = dev[0].p2p_dev_addr()

tests/hwsim/test_p2p_set.py

@@ -4,6 +4,8 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
+
 def test_p2p_set(dev):
     """P2P_SET commands"""
     for cmd in [ "",
@@ -102,6 +104,7 @@ def test_p2p_set_managed(dev):
     dev[2].p2p_stop_find()
     dev[0].p2p_stop_find()
 
+@remote_compatible
 def test_p2p_set_ssid_postfix(dev):
     """P2P_SET ssid_postfix"""
     addr0 = dev[0].p2p_dev_addr()

tests/hwsim/test_p2p_wifi_display.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -298,6 +299,7 @@ def test_wifi_display_persistent_group(dev):
         dev[1].request("SET wifi_display 0")
         dev[2].request("SET wifi_display 0")
 
+@remote_compatible
 def test_wifi_display_invalid_subelem(dev):
     """Wi-Fi Display and invalid subelement parsing"""
     addr1 = dev[1].p2p_dev_addr()

tests/hwsim/test_p2ps.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -399,6 +400,7 @@ def set_no_group_iface(dev, enable):
     else:
         dev.global_request("SET p2p_no_group_iface 0")
 
+@remote_compatible
 def test_p2ps_exact_search(dev):
     """P2PS exact service request"""
     p2ps_advertise(r_dev=dev[0], r_role='1', svc_name='org.wi-fi.wfds.send.rx',
@@ -410,6 +412,7 @@ def test_p2ps_exact_search(dev):
     if ev0 is None:
         raise Exception("Unable to remove the advertisement instance")
 
+@remote_compatible
 def test_p2ps_exact_search_srvinfo(dev):
     """P2PS exact service request with service info"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.send.rx',
@@ -422,6 +425,7 @@ def test_p2ps_exact_search_srvinfo(dev):
     if ev0 is None:
         raise Exception("Unable to remove the advertisement instance")
 
+@remote_compatible
 def test_p2ps_nonexact_search(dev):
     """P2PS nonexact seek request"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.play.rx',
@@ -434,6 +438,7 @@ def test_p2ps_nonexact_search(dev):
     if ev0 is None:
         raise Exception("Unable to remove the advertisement instance")
 
+@remote_compatible
 def test_p2ps_nonexact_search_srvinfo(dev):
     """P2PS nonexact seek request with service info"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.send.rx',
@@ -446,6 +451,7 @@ def test_p2ps_nonexact_search_srvinfo(dev):
     if ev0 is None:
         raise Exception("Unable to remove the advertisement instance")
 
+@remote_compatible
 def test_p2ps_connect_p2ps_method_nonautoaccept(dev):
     """P2PS connect for non-auto-accept and P2PS config method"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.send.rx',
@@ -462,6 +468,7 @@ def test_p2ps_connect_p2ps_method_nonautoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_p2ps_method_autoaccept(dev):
     """P2PS connection with P2PS default config method and auto-accept"""
     p2ps_advertise(r_dev=dev[0], r_role='1', svc_name='org.wi-fi.wfds.send.rx',
@@ -478,6 +485,7 @@ def test_p2ps_connect_p2ps_method_autoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_keypad_method_nonautoaccept(dev):
     """P2PS Connection with non-auto-accept and seeker having keypad method"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.send.rx',
@@ -495,6 +503,7 @@ def test_p2ps_connect_keypad_method_nonautoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_display_method_nonautoaccept(dev):
     """P2PS connection with non-auto-accept and seeker having display method"""
     p2ps_advertise(r_dev=dev[0], r_role='0', svc_name='org.wi-fi.wfds.send.rx',
@@ -511,6 +520,7 @@ def test_p2ps_connect_display_method_nonautoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_keypad_method_autoaccept(dev):
     """P2PS connection with auto-accept and keypad method on seeker side"""
     p2ps_advertise(r_dev=dev[0], r_role='1', svc_name='org.wi-fi.wfds.send.rx',
@@ -527,6 +537,7 @@ def test_p2ps_connect_keypad_method_autoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_display_method_autoaccept(dev):
     """P2PS connection with auto-accept and display method on seeker side"""
     p2ps_advertise(r_dev=dev[0], r_role='1', svc_name='org.wi-fi.wfds.send.rx',
@@ -543,6 +554,7 @@ def test_p2ps_connect_display_method_autoaccept(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_adv_go_p2ps_method(dev):
     """P2PS auto-accept connection with advertisement as GO and P2PS method"""
     p2ps_advertise(r_dev=dev[0], r_role='4', svc_name='org.wi-fi.wfds.send.rx',
@@ -559,6 +571,7 @@ def test_p2ps_connect_adv_go_p2ps_method(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_adv_go_p2ps_method_group_iface(dev):
     """P2PS auto-accept connection with advertisement as GO and P2PS method using separate group interface"""
     set_no_group_iface(dev[0], 0)
@@ -577,6 +590,7 @@ def test_p2ps_connect_adv_go_p2ps_method_group_iface(dev):
         raise Exception("Unable to remove the advertisement instance")
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_adv_client_p2ps_method(dev):
     """P2PS auto-accept connection with advertisement as Client and P2PS method"""
     p2ps_advertise(r_dev=dev[0], r_role='2', svc_name='org.wi-fi.wfds.send.rx',
@@ -608,10 +622,12 @@ def p2ps_connect_adv_go_pin_method(dev, keep_group=False):
             raise Exception("Unable to remove the advertisement instance")
         remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_connect_adv_go_pin_method(dev):
     """P2PS advertiser as GO with keypad config method on seeker side and auto-accept"""
     p2ps_connect_adv_go_pin_method(dev)
 
+@remote_compatible
 def test_p2ps_connect_adv_client_pin_method(dev):
     """P2PS advertiser as client with keypad config method on seeker side and auto-accept"""
     dev[0].flush_scan_cache()
@@ -845,6 +861,7 @@ def test_p2ps_connect_adv_go_persistent(dev):
     p2ps_connect_pd(dev[0], dev[1], ev0, ev1)
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_adv_go_persistent_no_peer_entry(dev):
     """P2PS advertisement as GO having persistent group (no peer entry)"""
     go_neg_pin_authorized_persistent(i_dev=dev[0], i_intent=15,
@@ -863,6 +880,7 @@ def test_p2ps_adv_go_persistent_no_peer_entry(dev):
     if "persist=" not in ev0 or "persist=" not in ev1:
         raise Exception("Persistent group isn't used by peers")
 
+@remote_compatible
 def test_p2ps_pd_follow_on_status_failure(dev):
     """P2PS PD follow on request with status 11"""
     addr0 = dev[0].p2p_dev_addr()
@@ -921,6 +939,7 @@ def test_p2ps_go_probe(dev):
     dev[0].global_request("P2P_SERVICE_DEL asp " + str(adv_id))
     remove_group(dev[0], dev[1])
 
+@remote_compatible
 def test_p2ps_wildcard_p2ps(dev):
     """P2PS wildcard SD Probe Request/Response"""
     p2ps_wildcard = "org.wi-fi.wfds"
@@ -1049,34 +1068,40 @@ def p2ps_test_feature_capability_cpt(dev, adv_cpt, seeker_cpt, adv_role,
     if ev is None:
         raise Exception("Unable to remove the advertisement instance")
 
+@remote_compatible
 def test_p2ps_feature_capability_mac_autoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser MAC, seeker UDP:MAC, autoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="MAC", seeker_cpt="UDP:MAC",
                                      adv_role="4", result="MAC")
 
+@remote_compatible
 def test_p2ps_feature_capability_mac_nonautoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser:MAC, seeker UDP:MAC, nonautoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="MAC", seeker_cpt="UDP:MAC",
                                      adv_role="0", result="MAC")
 
+@remote_compatible
 def test_p2ps_feature_capability_mac_udp_autoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser MAC:UDP, seeker UDP:MAC, autoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="MAC:UDP",
                                      seeker_cpt="UDP:MAC", adv_role="2",
                                      result="MAC")
 
+@remote_compatible
 def test_p2ps_feature_capability_mac_udp_nonautoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser MAC:UDP, seeker UDP:MAC, nonautoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="MAC:UDP",
                                      seeker_cpt="UDP:MAC", adv_role="0",
                                      result="UDP")
 
+@remote_compatible
 def test_p2ps_feature_capability_udp_mac_autoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser UDP:MAC, seeker MAC:UDP, autoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="UDP:MAC",
                                      seeker_cpt="MAC:UDP", adv_role="2",
                                      result="UDP")
 
+@remote_compatible
 def test_p2ps_feature_capability_udp_mac_nonautoaccept(dev):
     """P2PS PD Feature Capability CPT: advertiser UDP:MAC, seeker MAC:UDP,  nonautoaccept"""
     p2ps_test_feature_capability_cpt(dev, adv_cpt="UDP:MAC",
@@ -1205,6 +1230,7 @@ def test_p2ps_channel_both_connected_different_mcc(dev, apdev):
 def clear_disallow_handler(seeker, advertiser):
     advertiser.global_request("P2P_SET disallow_freq ")
 
+@remote_compatible
 def test_p2ps_channel_disallow_freq(dev, apdev):
     """P2PS connection with P2PS method - disallow freqs"""
     set_no_group_iface(dev[0], 0)
@@ -1299,6 +1325,7 @@ def test_p2ps_channel_sta_connected_disallow_freq_mcc(dev, apdev):
             dev[0].global_request("P2P_SET disallow_freq ")
             dev[0].global_request("P2P_SERVICE_DEL asp all")
 
+@remote_compatible
 def test_p2ps_active_go_adv(dev, apdev):
     """P2PS connection with P2PS method - active GO on advertiser"""
     set_no_group_iface(dev[0], 0)
@@ -1330,6 +1357,7 @@ def test_p2ps_active_go_adv(dev, apdev):
         remove_group(dev[0], dev[1])
         dev[0].global_request("P2P_SERVICE_DEL asp all")
 
+@remote_compatible
 def test_p2ps_active_go_seeker(dev, apdev):
     """P2PS connection with P2PS method - active GO on seeker"""
     set_no_group_iface(dev[0], 0)
@@ -1437,6 +1465,7 @@ def test_p2ps_channel_active_go_and_station_different(dev, apdev):
         dev[0].global_request("P2P_SERVICE_DEL asp all")
         set_random_listen_chan(dev[1])
 
+@remote_compatible
 def test_p2ps_channel_active_go_and_station_different_mcc(dev, apdev):
     """P2PS connection, active P2P GO and station on channel"""
     if dev[0].get_mcc() == 1:
@@ -1532,6 +1561,7 @@ def run_p2ps_connect_p2p_device2(dev, no_group_iface):
             raise Exception("Unable to remove the advertisement instance")
         remove_group(wpas, dev[0])
 
+@remote_compatible
 def test_p2ps_connect_p2ps_method_no_pin(dev):
     """P2P group formation using P2PS method without specifying PIN"""
     dev[0].p2p_listen()

tests/hwsim/test_peerkey.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import time
@@ -13,6 +14,7 @@ import hostapd
 from utils import skip_with_fips
 from wlantest import Wlantest
 
+@remote_compatible
 def test_peerkey(dev, apdev):
     """RSN AP and PeerKey between two STAs"""
     ssid = "test-peerkey"
@@ -47,6 +49,7 @@ def test_peerkey_unknown_peer(dev, apdev):
     dev[0].request("STKSTART " + dev[2].p2p_interface_addr())
     time.sleep(0.5)
 
+@remote_compatible
 def test_peerkey_pairwise_mismatch(dev, apdev):
     """RSN TKIP+CCMP AP and PeerKey between two STAs using different ciphers"""
     skip_with_fips(dev[0])

tests/hwsim/test_radius.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import hashlib
 import hmac
@@ -27,6 +28,7 @@ def connect(dev, ssid, wait_connect=True):
                 password_hex="0123456789abcdef0123456789abcdef",
                 wait_connect=wait_connect)
 
+@remote_compatible
 def test_radius_auth_unreachable(dev, apdev):
     """RADIUS Authentication server unreachable"""
     params = hostapd.wpa2_eap_params(ssid="radius-auth")
@@ -1138,6 +1140,7 @@ def test_radius_auth_force_client_addr(dev, apdev):
     hapd = hostapd.add_ap(apdev[0], params)
     connect(dev[0], "radius-auth")
 
+@remote_compatible
 def test_radius_auth_force_invalid_client_addr(dev, apdev):
     """RADIUS client address specified and invalid address"""
     params = hostapd.wpa2_eap_params(ssid="radius-auth")

tests/hwsim/test_sae.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import os
 import time
@@ -15,6 +16,7 @@ import hostapd
 from utils import HwsimSkip, alloc_fail, fail_test, wait_fail_trigger
 from test_ap_psk import find_wpas_process, read_process_memory, verify_not_present, get_key_locations
 
+@remote_compatible
 def test_sae(dev, apdev):
     """SAE with default group"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -38,6 +40,7 @@ def test_sae(dev, apdev):
     if "[WPA2-SAE-CCMP]" not in bss['flags']:
         raise Exception("Unexpected BSS flags: " + bss['flags'])
 
+@remote_compatible
 def test_sae_password_ecc(dev, apdev):
     """SAE with number of different passwords (ECC)"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -57,6 +60,7 @@ def test_sae_password_ecc(dev, apdev):
         dev[0].request("REMOVE_NETWORK all")
         dev[0].wait_disconnected()
 
+@remote_compatible
 def test_sae_password_ffc(dev, apdev):
     """SAE with number of different passwords (FFC)"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -77,6 +81,7 @@ def test_sae_password_ffc(dev, apdev):
         dev[0].request("REMOVE_NETWORK all")
         dev[0].wait_disconnected()
 
+@remote_compatible
 def test_sae_pmksa_caching(dev, apdev):
     """SAE and PMKSA caching"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -99,6 +104,7 @@ def test_sae_pmksa_caching(dev, apdev):
     if dev[0].get_status_field('sae_group') is not None:
             raise Exception("SAE group claimed to have been used")
 
+@remote_compatible
 def test_sae_pmksa_caching_disabled(dev, apdev):
     """SAE and PMKSA caching disabled"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -172,6 +178,7 @@ def test_sae_groups(dev, apdev):
         dev[0].wait_disconnected()
         dev[0].dump_monitor()
 
+@remote_compatible
 def test_sae_group_nego(dev, apdev):
     """SAE group negotiation"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -188,6 +195,7 @@ def test_sae_group_nego(dev, apdev):
     if dev[0].get_status_field('sae_group') != '19':
         raise Exception("Expected SAE group not used")
 
+@remote_compatible
 def test_sae_anti_clogging(dev, apdev):
     """SAE anti clogging"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -238,6 +246,7 @@ def test_sae_mixed(dev, apdev):
         dev[i].connect("test-sae", psk="12345678", key_mgmt="SAE",
                        scan_freq="2412")
 
+@remote_compatible
 def test_sae_missing_password(dev, apdev):
     """SAE and missing password"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -380,6 +389,7 @@ def test_sae_key_lifetime_in_memory(dev, apdev, params):
     verify_not_present(buf, sae_keyseed, fname, "SAE(keyseed)")
     verify_not_present(buf, sae_kck, fname, "SAE(KCK)")
 
+@remote_compatible
 def test_sae_oom_wpas(dev, apdev):
     """SAE and OOM in wpa_supplicant"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -404,6 +414,7 @@ def test_sae_oom_wpas(dev, apdev):
                        scan_freq="2412")
         dev[0].request("REMOVE_NETWORK all")
 
+@remote_compatible
 def test_sae_proto_ecc(dev, apdev):
     """SAE protocol testing (ECC)"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -502,6 +513,7 @@ def test_sae_proto_ecc(dev, apdev):
         hapd.set("ext_mgmt_frame_handling", "0")
         hapd.dump_monitor()
 
+@remote_compatible
 def test_sae_proto_ffc(dev, apdev):
     """SAE protocol testing (FFC)"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -582,6 +594,7 @@ def test_sae_proto_ffc(dev, apdev):
         hapd.set("ext_mgmt_frame_handling", "0")
         hapd.dump_monitor()
 
+@remote_compatible
 def test_sae_no_ffc_by_default(dev, apdev):
     """SAE and default groups rejecting FFC"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -642,14 +655,17 @@ def sae_reflection_attack(apdev, dev, group):
         if req['subtype'] == 11:
             raise Exception("Unexpected Authentication frame seen")
 
+@remote_compatible
 def test_sae_reflection_attack_ecc(dev, apdev):
     """SAE reflection attack (ECC)"""
     sae_reflection_attack(apdev[0], dev[0], 19)
 
+@remote_compatible
 def test_sae_reflection_attack_ffc(dev, apdev):
     """SAE reflection attack (FFC)"""
     sae_reflection_attack(apdev[0], dev[0], 5)
 
+@remote_compatible
 def test_sae_anti_clogging_proto(dev, apdev):
     """SAE anti clogging protocol testing"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -692,6 +708,7 @@ def test_sae_anti_clogging_proto(dev, apdev):
         if req['subtype'] == 11:
             raise Exception("Unexpected Authentication frame seen")
 
+@remote_compatible
 def test_sae_no_random(dev, apdev):
     """SAE and no random numbers available"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -712,6 +729,7 @@ def test_sae_no_random(dev, apdev):
             dev[0].request("REMOVE_NETWORK all")
             dev[0].wait_disconnected()
 
+@remote_compatible
 def test_sae_pwe_failure(dev, apdev):
     """SAE and pwe failure"""
     if "SAE" not in dev[0].get_capability("auth_alg"):
@@ -752,6 +770,7 @@ def test_sae_pwe_failure(dev, apdev):
         dev[0].request("REMOVE_NETWORK all")
         dev[0].wait_disconnected()
 
+@remote_compatible
 def test_sae_bignum_failure(dev, apdev):
     """SAE and bignum failure"""
     if "SAE" not in dev[0].get_capability("auth_alg"):

tests/hwsim/test_scan.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -62,6 +63,7 @@ def check_scan_retry(dev, params, bssid):
             return
     raise Exception("Unexpectedly old BSS entry")
 
+@remote_compatible
 def test_scan(dev, apdev):
     """Control interface behavior on scan parameters"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -86,6 +88,7 @@ def test_scan(dev, apdev):
     logger.info("Active single-channel scan on AP's operating channel")
     check_scan_retry(dev[0], "freq=2412 passive=0 use_id=1", bssid)
 
+@remote_compatible
 def test_scan_tsf(dev, apdev):
     """Scan and TSF updates from Beacon/Probe Response frames"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan",
@@ -110,6 +113,7 @@ def test_scan_tsf(dev, apdev):
     if 0 in tsf:
         raise Exception("0 TSF reported")
 
+@remote_compatible
 def test_scan_only(dev, apdev):
     """Control interface behavior on scan parameters with type=only"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -134,6 +138,7 @@ def test_scan_only(dev, apdev):
     logger.info("Active single-channel scan on AP's operating channel")
     check_scan_retry(dev[0], "type=only freq=2412 passive=0 use_id=1", bssid)
 
+@remote_compatible
 def test_scan_external_trigger(dev, apdev):
     """Avoid operations during externally triggered scan"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -160,6 +165,7 @@ def test_scan_bss_expiration_count(dev, apdev):
     if bssid in dev[0].request("SCAN_RESULTS"):
         raise Exception("BSS found after two scans without match")
 
+@remote_compatible
 def test_scan_bss_expiration_age(dev, apdev):
     """BSS entry expiration based on age"""
     try:
@@ -189,6 +195,7 @@ def test_scan_bss_expiration_age(dev, apdev):
     finally:
         dev[0].request("BSS_EXPIRE_AGE 180")
 
+@remote_compatible
 def test_scan_filter(dev, apdev):
     """Filter scan results based on SSID"""
     try:
@@ -211,6 +218,7 @@ def test_scan_filter(dev, apdev):
     finally:
         dev[0].request("SET filter_ssids 0")
 
+@remote_compatible
 def test_scan_int(dev, apdev):
     """scan interval configuration"""
     try:
@@ -325,6 +333,7 @@ def test_scan_bss_operations(dev, apdev):
     if len(res) != 0:
         raise Exception("Unexpected result after BSS_FLUSH 0")
 
+@remote_compatible
 def test_scan_and_interface_disabled(dev, apdev):
     """Scan operation when interface gets disabled"""
     try:
@@ -346,6 +355,7 @@ def test_scan_and_interface_disabled(dev, apdev):
     finally:
         dev[0].request("DRIVER_EVENT INTERFACE_ENABLED")
 
+@remote_compatible
 def test_scan_for_auth(dev, apdev):
     """cfg80211 workaround with scan-for-auth"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -375,6 +385,7 @@ def test_scan_for_auth(dev, apdev):
 
     dev[0].wait_connected(timeout=15)
 
+@remote_compatible
 def test_scan_for_auth_fail(dev, apdev):
     """cfg80211 workaround with scan-for-auth failing"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "open" })
@@ -411,6 +422,7 @@ def test_scan_for_auth_fail(dev, apdev):
         raise Exception("Unexpected connection")
     dev[0].request("DISCONNECT")
 
+@remote_compatible
 def test_scan_for_auth_wep(dev, apdev):
     """cfg80211 scan-for-auth workaround with WEP keys"""
     dev[0].flush_scan_cache()
@@ -443,6 +455,7 @@ def test_scan_for_auth_wep(dev, apdev):
 
     dev[0].wait_connected(timeout=15)
 
+@remote_compatible
 def test_scan_hidden(dev, apdev):
     """Control interface behavior on scan parameters"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": "test-scan",
@@ -572,6 +585,7 @@ def test_scan_and_bss_entry_removed(dev, apdev):
     dev[0].flush_scan_cache()
     wpas.flush_scan_cache()
 
+@remote_compatible
 def test_scan_reqs_with_non_scan_radio_work(dev, apdev):
     """SCAN commands while non-scan radio_work is in progress"""
     id = dev[0].request("RADIO_WORK add test-work-a")
@@ -678,6 +692,7 @@ def test_scan_setband(dev, apdev):
             dev[i].request("SET setband AUTO")
             dev[i].flush_scan_cache()
 
+@remote_compatible
 def test_scan_hidden_many(dev, apdev):
     """scan_ssid=1 with large number of profile with hidden SSID"""
     try:
@@ -775,6 +790,7 @@ def _test_scan_random_mac(dev, apdev, params):
         if not found:
             raise Exception("Fixed OUI random address not seen")
 
+@remote_compatible
 def test_scan_trigger_failure(dev, apdev):
     """Scan trigger to the driver failing"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -818,6 +834,7 @@ def test_scan_trigger_failure(dev, apdev):
         raise Exception("wpa_state COMPLETED not restored")
     dev[0].request("SET test_failure 0")
 
+@remote_compatible
 def test_scan_specify_ssid(dev, apdev):
     """Control interface behavior on scan SSID parameter"""
     dev[0].flush_scan_cache()
@@ -846,6 +863,7 @@ def test_scan_specify_ssid(dev, apdev):
     if "FAIL" not in dev[0].request("SCAN ssid foo"):
         raise Exception("Invalid SCAN command accepted")
 
+@remote_compatible
 def test_scan_ap_scan_2_ap_mode(dev, apdev):
     """AP_SCAN 2 AP mode and scan()"""
     try:
@@ -966,6 +984,7 @@ def _test_scan_dfs(dev, apdev, params):
             if f in [ 2467, 2472 ]:
                 raise Exception("Active scan on US-disallowed channel: %d" % f)
 
+@remote_compatible
 def test_scan_abort(dev, apdev):
     """Aborting a full scan"""
     dev[0].request("SCAN")
@@ -978,6 +997,7 @@ def test_scan_abort(dev, apdev):
     if ev is None:
         raise Exception("Scan did not terminate")
 
+@remote_compatible
 def test_scan_abort_on_connect(dev, apdev):
     """Aborting a full scan on connection request"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -991,6 +1011,7 @@ def test_scan_abort_on_connect(dev, apdev):
         raise Exception("Scan did not start")
     dev[0].connect("test-scan", key_mgmt="NONE")
 
+@remote_compatible
 def test_scan_ext(dev, apdev):
     """Custom IE in Probe Request frame"""
     hostapd.add_ap(apdev[0], { "ssid": "test-scan" })
@@ -1093,6 +1114,7 @@ def test_scan_fail(dev, apdev):
     with alloc_fail(dev[0], 1, "wpa_bss_add"):
         dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
 
+@remote_compatible
 def test_scan_freq_list(dev, apdev):
     """Scan with SET freq_list and scan_cur_freq"""
     try:

tests/hwsim/test_ssid.py

@@ -5,11 +5,13 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 
 import hostapd
 
+@remote_compatible
 def test_ssid_hex_encoded(dev, apdev):
     """SSID configuration using hex encoded version"""
     hostapd.add_ap(apdev[0], { "ssid2": '68656c6c6f' })
@@ -29,11 +31,13 @@ def test_ssid_printf_encoded(dev, apdev):
         raise Exception("Unexpected difference in SSID")
     dev[2].connect(ssid2='P"' + ssid + '"', key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ssid_1_octet(dev, apdev):
     """SSID with one octet"""
     hostapd.add_ap(apdev[0], { "ssid": '1' })
     dev[0].connect("1", key_mgmt="NONE", scan_freq="2412")
 
+@remote_compatible
 def test_ssid_32_octets(dev, apdev):
     """SSID with 32 octets"""
     hostapd.add_ap(apdev[0],
@@ -41,6 +45,7 @@ def test_ssid_32_octets(dev, apdev):
     dev[0].connect("1234567890abcdef1234567890ABCDEF", key_mgmt="NONE",
                    scan_freq="2412")
 
+@remote_compatible
 def test_ssid_utf8(dev, apdev):
     """SSID with UTF8 encoding"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": 'testi-åäöÅÄÖ-testi',
@@ -69,6 +74,7 @@ def clear_scan_cache(hapd, dev):
     dev[0].flush_scan_cache()
     dev[1].flush_scan_cache()
 
+@remote_compatible
 def test_ssid_hidden(dev, apdev):
     """Hidden SSID"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": 'secret',
@@ -81,6 +87,7 @@ def test_ssid_hidden(dev, apdev):
         raise Exception("Unexpected connection")
     clear_scan_cache(hapd, dev)
 
+@remote_compatible
 def test_ssid_hidden2(dev, apdev):
     """Hidden SSID using zero octets as payload"""
     hapd = hostapd.add_ap(apdev[0], { "ssid": 'secret2',
@@ -93,6 +100,7 @@ def test_ssid_hidden2(dev, apdev):
         raise Exception("Unexpected connection")
     clear_scan_cache(hapd, dev)
 
+@remote_compatible
 def test_ssid_hidden_wpa2(dev, apdev):
     """Hidden SSID with WPA2-PSK"""
     params = hostapd.wpa2_params(ssid="secret", passphrase="12345678")

tests/hwsim/test_wep.py

@@ -4,9 +4,11 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import hostapd
 import hwsim_utils
 
+@remote_compatible
 def test_wep_open_auth(dev, apdev):
     """WEP Open System authentication"""
     hapd = hostapd.add_ap(apdev[0],
@@ -25,6 +27,7 @@ def test_wep_open_auth(dev, apdev):
     if "[WEP]" not in bss['flags']:
         raise Exception("Unexpected BSS flags: " + bss['flags'])
 
+@remote_compatible
 def test_wep_shared_key_auth(dev, apdev):
     """WEP Shared Key authentication"""
     hapd = hostapd.add_ap(apdev[0],
@@ -39,6 +42,7 @@ def test_wep_shared_key_auth(dev, apdev):
                    wep_key0='"hello12345678"',
                    scan_freq="2412")
 
+@remote_compatible
 def test_wep_shared_key_auth_not_allowed(dev, apdev):
     """WEP Shared Key authentication not allowed"""
     hostapd.add_ap(apdev[0],

tests/hwsim/test_wnm.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import binascii
 import struct
 import time
@@ -16,6 +17,7 @@ from wpasupplicant import WpaSupplicant
 from utils import alloc_fail, wait_fail_trigger
 from wlantest import Wlantest
 
+@remote_compatible
 def test_wnm_bss_transition_mgmt(dev, apdev):
     """WNM BSS Transition Management"""
     params = { "ssid": "test-wnm",
@@ -28,6 +30,7 @@ def test_wnm_bss_transition_mgmt(dev, apdev):
     dev[0].connect("test-wnm", key_mgmt="NONE", scan_freq="2412")
     dev[0].request("WNM_BSS_QUERY 0")
 
+@remote_compatible
 def test_wnm_disassoc_imminent(dev, apdev):
     """WNM Disassociation Imminent"""
     params = { "ssid": "test-wnm",
@@ -49,6 +52,7 @@ def test_wnm_disassoc_imminent(dev, apdev):
     if ev is None:
         raise Exception("Timeout while waiting for re-connection scan")
 
+@remote_compatible
 def test_wnm_ess_disassoc_imminent(dev, apdev):
     """WNM ESS Disassociation Imminent"""
     params = { "ssid": "test-wnm",
@@ -70,6 +74,7 @@ def test_wnm_ess_disassoc_imminent(dev, apdev):
     if ev is None:
         raise Exception("Timeout while waiting for re-connection scan")
 
+@remote_compatible
 def test_wnm_ess_disassoc_imminent_pmf(dev, apdev):
     """WNM ESS Disassociation Imminent"""
     params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
@@ -127,6 +132,7 @@ def check_wnm_sleep_mode_enter_exit(hapd, dev, interval=None, tfs_req=None):
     if not ok:
         raise Exception("Station failed to exit WNM-Sleep Mode")
 
+@remote_compatible
 def test_wnm_sleep_mode_open(dev, apdev):
     """WNM Sleep Mode - open"""
     params = { "ssid": "test-wnm",
@@ -151,6 +157,7 @@ def test_wnm_sleep_mode_open(dev, apdev):
         if "FAIL" not in dev[0].request("WNM_SLEEP " + cmd):
             raise Exception("Invalid WNM_SLEEP accepted")
 
+@remote_compatible
 def test_wnm_sleep_mode_rsn(dev, apdev):
     """WNM Sleep Mode - RSN"""
     params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
@@ -166,6 +173,7 @@ def test_wnm_sleep_mode_rsn(dev, apdev):
         raise Exception("No connection event received from hostapd")
     check_wnm_sleep_mode_enter_exit(hapd, dev[0])
 
+@remote_compatible
 def test_wnm_sleep_mode_ap_oom(dev, apdev):
     """WNM Sleep Mode - AP side OOM"""
     params = { "ssid": "test-wnm",
@@ -183,6 +191,7 @@ def test_wnm_sleep_mode_ap_oom(dev, apdev):
         dev[0].request("WNM_SLEEP exit")
         wait_fail_trigger(hapd, "GET_ALLOC_FAIL")
 
+@remote_compatible
 def test_wnm_sleep_mode_rsn_pmf(dev, apdev):
     """WNM Sleep Mode - RSN with PMF"""
     params = hostapd.wpa2_params("test-wnm-rsn", "12345678")
@@ -280,6 +289,7 @@ def expect_ack(hapd):
     if "ok=1" not in ev:
         raise Exception("Action frame not acknowledged")
 
+@remote_compatible
 def test_wnm_bss_tm_req(dev, apdev):
     """BSS Transition Management Request"""
     params = { "ssid": "test-wnm", "bss_transition": "1" }
@@ -427,6 +437,7 @@ def test_wnm_bss_tm_req(dev, apdev):
     hapd.mgmt_tx(req)
     resp = rx_bss_tm_resp(hapd, expect_dialog=8, expect_status=7)
 
+@remote_compatible
 def test_wnm_bss_keep_alive(dev, apdev):
     """WNM keep-alive"""
     params = { "ssid": "test-wnm",
@@ -1054,6 +1065,7 @@ def test_wnm_action_proto(dev, apdev):
     hapd.mgmt_tx(msg)
     expect_ack(hapd)
 
+@remote_compatible
 def test_wnm_action_proto_pmf(dev, apdev):
     """WNM Action protocol testing (PMF enabled)"""
     ssid = "test-wnm-pmf"
@@ -1158,6 +1170,7 @@ def test_wnm_action_proto_pmf(dev, apdev):
     hapd.mgmt_tx(msg)
     expect_ack(hapd)
 
+@remote_compatible
 def test_wnm_action_proto_no_pmf(dev, apdev):
     """WNM Action protocol testing (PMF disabled)"""
     ssid = "test-wnm-no-pmf"
@@ -1258,6 +1271,7 @@ def test_wnm_bss_tm_req_with_mbo_ie(dev, apdev):
     if "OK" not in dev[0].request("SET mbo_cell_capa 3"):
         raise Exception("Failed to set STA as cellular data not-capable")
 
+@remote_compatible
 def test_wnm_bss_transition_mgmt_query(dev, apdev):
     """WNM BSS Transition Management query"""
     params = { "ssid": "test-wnm",
@@ -1281,6 +1295,7 @@ def test_wnm_bss_transition_mgmt_query(dev, apdev):
     if ev is None:
         raise Exception("No BSS Transition Management Response frame seen")
 
+@remote_compatible
 def test_wnm_bss_tm_security_mismatch(dev, apdev):
     """WNM BSS Transition Management and security mismatch"""
     params = { "ssid": "test-wnm",

tests/hwsim/test_wpas_ap.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import time
 import logging
 logger = logging.getLogger()
@@ -77,6 +78,7 @@ def test_wpas_ap_open(dev):
     dev[1].request("DISCONNECT")
     dev[2].request("DISCONNECT")
 
+@remote_compatible
 def test_wpas_ap_wep(dev):
     """wpa_supplicant AP mode - WEP"""
     id = dev[0].add_network()
@@ -94,6 +96,7 @@ def test_wpas_ap_wep(dev):
     hwsim_utils.test_connectivity(dev[0], dev[1])
     dev[1].request("DISCONNECT")
 
+@remote_compatible
 def test_wpas_ap_no_ssid(dev):
     """wpa_supplicant AP mode - invalid network configuration"""
     id = dev[0].add_network()
@@ -106,6 +109,7 @@ def test_wpas_ap_no_ssid(dev):
     if ev is not None:
         raise Exception("Unexpected AP start")
 
+@remote_compatible
 def test_wpas_ap_default_frequency(dev):
     """wpa_supplicant AP mode - default frequency"""
     id = dev[0].add_network()
@@ -118,6 +122,7 @@ def test_wpas_ap_default_frequency(dev):
     dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq="2462")
     dev[1].request("DISCONNECT")
 
+@remote_compatible
 def test_wpas_ap_invalid_frequency(dev):
     """wpa_supplicant AP mode - invalid frequency configuration"""
     id = dev[0].add_network()
@@ -297,6 +302,7 @@ def test_wpas_ap_wps_pbc_overlap(dev):
     dev[1].request("WPS_CANCEL")
     dev[2].request("WPS_CANCEL")
 
+@remote_compatible
 def test_wpas_ap_wps_disabled(dev):
     """wpa_supplicant AP mode - WPS disabled"""
     id = dev[0].add_network()
@@ -352,6 +358,7 @@ def _test_wpas_ap_dfs(dev):
 
     dev[1].connect("wpas-ap-dfs", key_mgmt="NONE")
 
+@remote_compatible
 def test_wpas_ap_disable(dev):
     """wpa_supplicant AP mode - DISABLE_NETWORK"""
     id = dev[0].add_network()
@@ -394,6 +401,7 @@ def test_wpas_ap_acs(dev):
 
     dev[1].connect("wpas-ap-open", key_mgmt="NONE", scan_freq=freq)
 
+@remote_compatible
 def test_wpas_ap_and_assoc_req_p2p_ie(dev):
     """wpa_supplicant AP mode - unexpected P2P IE in Association Request"""
     try:
@@ -421,6 +429,7 @@ def _test_wpas_ap_and_assoc_req_p2p_ie(dev):
     dev[0].request("DISCONNECT")
     dev[0].wait_disconnected()
 
+@remote_compatible
 def test_wpas_ap_open_ht_disabled(dev):
     """wpa_supplicant AP mode - open network and HT disabled"""
     id = dev[0].add_network()

tests/hwsim/test_wpas_ctrl.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import os
@@ -18,6 +19,7 @@ from wpasupplicant import WpaSupplicant
 from utils import alloc_fail, fail_test
 from test_wpas_ap import wait_ap_ready
 
+@remote_compatible
 def test_wpas_ctrl_network(dev):
     """wpa_supplicant ctrl_iface network set/get"""
     id = dev[0].add_network()
@@ -278,6 +280,7 @@ def test_wpas_ctrl_network(dev):
         if "FAIL" not in dev[0].request("SET_NETWORK %d bssid_blacklist %s" % (id, val)):
             raise Exception("Invalid bssid_blacklist value accepted")
 
+@remote_compatible
 def test_wpas_ctrl_network_oom(dev):
     """wpa_supplicant ctrl_iface network OOM in string parsing"""
     id = dev[0].add_network()
@@ -291,6 +294,7 @@ def test_wpas_ctrl_network_oom(dev):
             if "FAIL" not in dev[0].request("SET_NETWORK " + str(id) + ' ssid ' + val):
                 raise Exception("Unexpected success for SET_NETWORK during OOM")
 
+@remote_compatible
 def test_wpas_ctrl_many_networks(dev, apdev):
     """wpa_supplicant ctrl_iface LIST_NETWORKS with huge number of networks"""
     for i in range(1000):
@@ -306,6 +310,7 @@ def test_wpas_ctrl_many_networks(dev, apdev):
     # with the test case failing and following reset operation timing out.
     dev[0].request("REMOVE_NETWORK all", timeout=60)
 
+@remote_compatible
 def test_wpas_ctrl_dup_network(dev, apdev):
     """wpa_supplicant ctrl_iface DUP_NETWORK"""
     ssid = "target"
@@ -339,6 +344,7 @@ def test_wpas_ctrl_dup_network(dev, apdev):
     if "OK" not in dev[0].request("DUP_NETWORK %d %d ssid" % (id, id)):
         raise Exception("Unexpected DUP_NETWORK failure")
 
+@remote_compatible
 def test_wpas_ctrl_dup_network_global(dev, apdev):
     """wpa_supplicant ctrl_iface DUP_NETWORK (global)"""
     ssid = "target"
@@ -407,6 +413,7 @@ def remove_cred(dev, id):
     if " " + str(id) not in ev:
         raise Exception("CRED-REMOVED event without matching id")
 
+@remote_compatible
 def test_wpas_ctrl_cred(dev):
     """wpa_supplicant ctrl_iface cred set"""
     id1 = add_cred(dev[0])
@@ -602,6 +609,7 @@ def test_wpas_ctrl_pno(dev):
     if "FAIL" in dev[0].request("SET pno 0"):
         raise Exception("Unexpected failure in disabling PNO")
 
+@remote_compatible
 def test_wpas_ctrl_get(dev):
     """wpa_supplicant ctrl_iface get"""
     if "FAIL" in dev[0].request("GET version"):
@@ -611,6 +619,7 @@ def test_wpas_ctrl_get(dev):
     if "FAIL" not in dev[0].request("GET foo"):
         raise Exception("Unexpected success on get command")
 
+@remote_compatible
 def test_wpas_ctrl_preauth(dev):
     """wpa_supplicant ctrl_iface preauth"""
     if "FAIL" not in dev[0].request("PREAUTH "):
@@ -618,6 +627,7 @@ def test_wpas_ctrl_preauth(dev):
     if "FAIL" in dev[0].request("PREAUTH 00:11:22:33:44:55"):
         raise Exception("Unexpected failure on PREAUTH")
 
+@remote_compatible
 def test_wpas_ctrl_stkstart(dev):
     """wpa_supplicant ctrl_iface strkstart"""
     if "FAIL" not in dev[0].request("STKSTART "):
@@ -625,6 +635,7 @@ def test_wpas_ctrl_stkstart(dev):
     if "FAIL" not in dev[0].request("STKSTART 00:11:22:33:44:55"):
         raise Exception("Unexpected success on STKSTART")
 
+@remote_compatible
 def test_wpas_ctrl_tdls_discover(dev):
     """wpa_supplicant ctrl_iface tdls_discover"""
     if "FAIL" not in dev[0].request("TDLS_DISCOVER "):
@@ -632,6 +643,7 @@ def test_wpas_ctrl_tdls_discover(dev):
     if "FAIL" not in dev[0].request("TDLS_DISCOVER 00:11:22:33:44:55"):
         raise Exception("Unexpected success on TDLS_DISCOVER")
 
+@remote_compatible
 def test_wpas_ctrl_tdls_chan_switch(dev):
     """wpa_supplicant ctrl_iface tdls_chan_switch error cases"""
     for args in [ '', '00:11:22:33:44:55' ]:
@@ -644,6 +656,7 @@ def test_wpas_ctrl_tdls_chan_switch(dev):
         if "FAIL" not in dev[0].request("TDLS_CHAN_SWITCH " + args):
             raise Exception("Unexpected success on invalid TDLS_CHAN_SWITCH: " + args)
 
+@remote_compatible
 def test_wpas_ctrl_addr(dev):
     """wpa_supplicant ctrl_iface invalid address"""
     if "FAIL" not in dev[0].request("TDLS_SETUP "):
@@ -665,6 +678,7 @@ def test_wpas_ctrl_addr(dev):
     if "FAIL" not in dev[0].request("BLACKLIST 00:11:22:33:44"):
         raise Exception("Unexpected success on invalid BLACKLIST")
 
+@remote_compatible
 def test_wpas_ctrl_wps_errors(dev):
     """wpa_supplicant ctrl_iface WPS error cases"""
     if "FAIL" not in dev[0].request("WPS_REG 00:11:22:33:44:55"):
@@ -713,6 +727,7 @@ def test_wpas_ctrl_wps_errors(dev):
     if "FAIL" not in dev[0].request("WPS_NFC_TOKEN FOO"):
         raise Exception("Unexpected success on invalid WPS_NFC_TOKEN")
 
+@remote_compatible
 def test_wpas_ctrl_config_parser(dev):
     """wpa_supplicant ctrl_iface SET config parser"""
     if "FAIL" not in dev[0].request("SET pbc_in_m1 qwerty"):
@@ -725,6 +740,7 @@ def test_wpas_ctrl_config_parser(dev):
     if "FAIL" not in dev[0].request("SET serial_number 0123456789abcdef0123456789abcdef0"):
         raise Exception("Too long string accepted")
 
+@remote_compatible
 def test_wpas_ctrl_mib(dev):
     """wpa_supplicant ctrl_iface MIB"""
     mib = dev[0].get_mib()
@@ -814,6 +830,7 @@ def test_wpas_ctrl_bssid_filter(dev, apdev):
     finally:
         dev[2].request("SET bssid_filter ")
 
+@remote_compatible
 def test_wpas_ctrl_disallow_aps(dev, apdev):
     """wpa_supplicant ctrl_iface disallow_aps"""
     params = { "ssid": "test" }
@@ -859,6 +876,7 @@ def test_wpas_ctrl_disallow_aps(dev, apdev):
     if "OK" not in dev[0].request("SET disallow_aps "):
         raise Exception("Failed to set disallow_aps")
 
+@remote_compatible
 def test_wpas_ctrl_blob(dev):
     """wpa_supplicant ctrl_iface SET blob"""
     if "FAIL" not in dev[0].request("SET blob foo"):
@@ -872,6 +890,7 @@ def test_wpas_ctrl_blob(dev):
     if "OK" not in dev[0].request("SET blob foo 0011"):
         raise Exception("Unexpected SET failure")
 
+@remote_compatible
 def test_wpas_ctrl_set_uapsd(dev):
     """wpa_supplicant ctrl_iface SET uapsd"""
     if "FAIL" not in dev[0].request("SET uapsd foo"):
@@ -926,6 +945,7 @@ def test_wpas_ctrl_set(dev):
     # methods is included, so don't check the return value for now.
     dev[0].request("SET load_dynamic_eap /tmp/hwsim-eap-not-found.so")
 
+@remote_compatible
 def test_wpas_ctrl_get_capability(dev):
     """wpa_supplicant ctrl_iface GET_CAPABILITY"""
     if "FAIL" not in dev[0].request("GET_CAPABILITY 1234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890"):
@@ -981,6 +1001,7 @@ def test_wpas_ctrl_get_capability(dev):
     if dev[0].get_capability("foo") is not None:
         raise Exception("Unexpected GET_CAPABILITY foo response: " + str(res))
 
+@remote_compatible
 def test_wpas_ctrl_nfc_report_handover(dev):
     """wpa_supplicant ctrl_iface NFC_REPORT_HANDOVER"""
     vals = [ "FOO",
@@ -996,6 +1017,7 @@ def test_wpas_ctrl_nfc_report_handover(dev):
         if "FAIL" not in dev[0].request("NFC_REPORT_HANDOVER " + v):
             raise Exception("Unexpected NFC_REPORT_HANDOVER success for " + v)
 
+@remote_compatible
 def test_wpas_ctrl_nfc_tag_read(dev):
     """wpa_supplicant ctrl_iface WPS_NFC_TAG_READ"""
     vals = [ "FOO", "0Q", "00", "000000", "10000001", "10000000", "00000000",
@@ -1004,6 +1026,7 @@ def test_wpas_ctrl_nfc_tag_read(dev):
         if "FAIL" not in dev[0].request("WPS_NFC_TAG_READ " + v):
             raise Exception("Unexpected WPS_NFC_TAG_READ success for " + v)
 
+@remote_compatible
 def test_wpas_ctrl_nfc_get_handover(dev):
     """wpa_supplicant ctrl_iface NFC_GET_HANDOVER"""
     vals = [ "FOO", "FOO BAR", "WPS WPS", "WPS WPS-CR", "WPS FOO", "NDEF P2P" ]
@@ -1031,6 +1054,7 @@ def test_wpas_ctrl_nfc_get_handover(dev):
 def get_blacklist(dev):
     return dev.request("BLACKLIST").splitlines()
 
+@remote_compatible
 def test_wpas_ctrl_blacklist(dev):
     """wpa_supplicant ctrl_iface BLACKLIST"""
     if "OK" not in dev[0].request("BLACKLIST clear"):
@@ -1059,6 +1083,7 @@ def test_wpas_ctrl_blacklist(dev):
     if dev[0].request("BLACKLIST") != "":
         raise Exception("Unexpected blacklist contents")
 
+@remote_compatible
 def test_wpas_ctrl_blacklist_oom(dev):
     """wpa_supplicant ctrl_iface BLACKLIST and out-of-memory"""
     with alloc_fail(dev[0], 1, "wpa_blacklist_add"):
@@ -1107,6 +1132,7 @@ def test_wpas_ctrl_log_level(dev):
     if "Timestamp: 1" not in level:
         raise Exception("Unexpected timestamp(3): " + level)
 
+@remote_compatible
 def test_wpas_ctrl_enable_disable_network(dev, apdev):
     """wpa_supplicant ctrl_iface ENABLE/DISABLE_NETWORK"""
     params = { "ssid": "test" }
@@ -1244,6 +1270,7 @@ def test_wpas_ctrl_global(dev):
     if "FAIL" not in wpas.global_request("INTERFACE_ADD FOO	conf	driver	ctrliface	driverparam	bridge	create	abcd"):
         raise Exception("INTERFACE_ADD succeeded unexpectedly")
 
+@remote_compatible
 def test_wpas_ctrl_roam(dev, apdev):
     """wpa_supplicant ctrl_iface ROAM error cases"""
     if "FAIL" not in dev[0].request("ROAM 00:11:22:33:44"):
@@ -1256,6 +1283,7 @@ def test_wpas_ctrl_roam(dev, apdev):
     if "FAIL" not in dev[0].request("ROAM 00:11:22:33:44:55"):
         raise Exception("Unexpected success")
 
+@remote_compatible
 def test_wpas_ctrl_ipaddr(dev, apdev):
     """wpa_supplicant IP address in STATUS"""
     try:
@@ -1268,6 +1296,7 @@ def test_wpas_ctrl_ipaddr(dev, apdev):
         dev[0].cmd_execute(['ip', 'addr', 'del', '10.174.65.207/32', 'dev',
                             dev[0].ifname])
 
+@remote_compatible
 def test_wpas_ctrl_rsp(dev, apdev):
     """wpa_supplicant ctrl_iface CTRL-RSP-"""
     if "FAIL" not in dev[0].request("CTRL-RSP-"):
@@ -1288,6 +1317,7 @@ def test_wpas_ctrl_rsp(dev, apdev):
         if "OK" not in dev[0].request("CTRL-RSP-%s-%d:" % (req, id)):
             raise Exception("Request failed unexpectedly")
 
+@remote_compatible
 def test_wpas_ctrl_vendor(dev, apdev):
     """wpa_supplicant ctrl_iface VENDOR"""
     cmds = [ "foo",
@@ -1299,6 +1329,7 @@ def test_wpas_ctrl_vendor(dev, apdev):
         if "FAIL" not in dev[0].request("VENDOR " + cmd):
             raise Exception("Invalid VENDOR command accepted: " + cmd)
 
+@remote_compatible
 def test_wpas_ctrl_mgmt_tx(dev, apdev):
     """wpa_supplicant ctrl_iface MGMT_TX"""
     cmds = [ "foo",
@@ -1313,11 +1344,13 @@ def test_wpas_ctrl_mgmt_tx(dev, apdev):
     if "OK" not in dev[0].request("MGMT_TX_DONE"):
         raise Exception("MGMT_TX_DONE failed")
 
+@remote_compatible
 def test_wpas_ctrl_driver_event(dev, apdev):
     """wpa_supplicant ctrl_iface DRIVER_EVENT"""
     if "FAIL" not in dev[0].request("DRIVER_EVENT foo"):
         raise Exception("Invalid DRIVER_EVENT accepted")
 
+@remote_compatible
 def test_wpas_ctrl_eapol_rx(dev, apdev):
     """wpa_supplicant ctrl_iface EAPOL_RX"""
     cmds = [ "foo",
@@ -1327,6 +1360,7 @@ def test_wpas_ctrl_eapol_rx(dev, apdev):
         if "FAIL" not in dev[0].request("EAPOL_RX " + cmd):
             raise Exception("Invalid EAPOL_RX command accepted: " + cmd)
 
+@remote_compatible
 def test_wpas_ctrl_data_test(dev, apdev):
     """wpa_supplicant ctrl_iface DATA_TEST"""
     dev[0].request("DATA_TEST_CONFIG 0")
@@ -1361,6 +1395,7 @@ def test_wpas_ctrl_data_test(dev, apdev):
     if "OK" not in dev[0].request("DATA_TEST_FRAME 00112233445566778899aabbccddee"):
         raise Exception("DATA_TEST_FRAME failed")
 
+@remote_compatible
 def test_wpas_ctrl_vendor_elem(dev, apdev):
     """wpa_supplicant ctrl_iface VENDOR_ELEM"""
     if "OK" not in dev[0].request("VENDOR_ELEM_ADD 1 "):
@@ -1429,6 +1464,7 @@ def test_wpas_ctrl_misc(dev, apdev):
     if "FAIL" not in dev[0].global_request("SET foo"):
         raise Exception("Invalid global SET accepted")
 
+@remote_compatible
 def test_wpas_ctrl_dump(dev, apdev):
     """wpa_supplicant ctrl_iface and DUMP/GET global parameters"""
     vals = dev[0].get_config()
@@ -1598,6 +1634,7 @@ def test_wpas_ctrl_wait(dev, apdev, test_params):
         if os.path.exists(pidfile):
             raise Exception("PID file not removed")
 
+@remote_compatible
 def test_wpas_ctrl_oom(dev):
     """Various wpa_supplicant ctrl_iface OOM cases"""
     try:
@@ -1745,6 +1782,7 @@ def _test_wpas_ctrl_oom(dev):
             if exp and exp not in res:
                 raise Exception("Unexpected success for '%s' during OOM" % cmd)
 
+@remote_compatible
 def test_wpas_ctrl_error(dev):
     """Various wpa_supplicant ctrl_iface error cases"""
     tests = [ ('WPS_NFC_TOKEN NDEF', 'FAIL',
@@ -1870,6 +1908,7 @@ def test_wpas_ctrl_event_burst(dev, apdev):
     if not dev[0].ping():
         raise Exception("Could not ping wpa_supplicant at the end of the test")
 
+@remote_compatible
 def test_wpas_ctrl_sched_scan_plans(dev, apdev):
     """wpa_supplicant sched_scan_plans parsing"""
     dev[0].request("SET sched_scan_plans foo")

tests/hwsim/test_wpas_wmm_ac.py

@@ -4,6 +4,7 @@
 # This software may be distributed under the terms of the BSD license.
 # See README for more details.
 
+from remotehost import remote_compatible
 import logging
 logger = logging.getLogger()
 import struct
@@ -209,6 +210,7 @@ def test_tspec_protocol(dev, apdev):
 
     hapd.set("ext_mgmt_frame_handling", "0")
 
+@remote_compatible
 def test_tspec_not_enabled(dev, apdev):
     """addts failing if AP does not support WMM"""
     params = { "ssid": "wmm_no_ac",
@@ -246,6 +248,7 @@ def test_tspec_not_enabled(dev, apdev):
     msg['payload'] = struct.pack('BBBB', 17, 2, 0, 0)
     hapd.mgmt_tx(msg)
 
+@remote_compatible
 def test_tspec_ap_roam_open(dev, apdev):
     """Roam between two open APs while having tspecs"""
     hapd0 = add_wmm_ap(apdev[0], ["VO", "VI"])
@@ -264,6 +267,7 @@ def test_tspec_ap_roam_open(dev, apdev):
     dev[0].roam(apdev[0]['bssid'])
     hwsim_utils.test_connectivity(dev[0], hapd0)
 
+@remote_compatible
 def test_tspec_reassoc(dev, apdev):
     """Reassociation to same BSS while having tspecs"""
     hapd0 = add_wmm_ap(apdev[0], ["VO", "VI"])