IEEE Std 802.11r-2008 has been released, so update references

hostapd/defconfig

@@ -115,10 +115,7 @@ CONFIG_PKCS12=y
 # Build IPv6 support for RADIUS operations
 CONFIG_IPV6=y
 
-# IEEE 802.11r/D4.1 (Fast BSS Transition)
-# This enables an experimental implementation of a draft version of
-# IEEE 802.11r. This draft is still subject to change, so it should be noted
-# that this version may not comply with the final standard.
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y
 
 # Use the hostapd's IEEE 802.11 authentication (ACL), but without

hostapd/wpa.h

@@ -22,7 +22,8 @@
 #pragma pack(push, 1)
 #endif /* _MSC_VER */
 
-/* IEEE 802.11r/D8.0, 11A.10.3 - Remote request/response frame definition */
+/* IEEE Std 802.11r-2008, 11A.10.3 - Remote request/response frame definition
+ */
 struct ft_rrb_frame {
 	u8 frame_type; /* RSN_REMOTE_FRAME_TYPE_FT_RRB */
 	u8 packet_type; /* FT_PACKET_REQUEST/FT_PACKET_RESPONSE */

hostapd/wpa_ft.c

@@ -1274,7 +1274,7 @@ int wpa_ft_rrb_rx(struct wpa_authenticator *wpa_auth, const u8 *src_addr,
 		   MAC2STR(frame->ap_address));
 
 	if (frame->frame_type != RSN_REMOTE_FRAME_TYPE_FT_RRB) {
-		/* Discard frame per IEEE 802.11r/D8.0, 10A.10.3 */
+		/* Discard frame per IEEE Std 802.11r-2008, 11A.10.3 */
 		wpa_printf(MSG_DEBUG, "FT: RRB discarded frame with "
 			   "unrecognized type %d", frame->frame_type);
 		return -1;

src/common/wpa_common.c

@@ -394,7 +394,7 @@ int wpa_parse_wpa_ie_rsn(const u8 *rsn_ie, size_t rsn_ie_len,
 /**
  * wpa_derive_pmk_r0 - Derive PMK-R0 and PMKR0Name
  *
- * IEEE 802.11r/D9.0 - 8.5.1.5.3
+ * IEEE Std 802.11r-2008 - 8.5.1.5.3
  */
 void wpa_derive_pmk_r0(const u8 *xxkey, size_t xxkey_len,
 		       const u8 *ssid, size_t ssid_len,
@@ -449,7 +449,7 @@ void wpa_derive_pmk_r0(const u8 *xxkey, size_t xxkey_len,
 /**
  * wpa_derive_pmk_r1_name - Derive PMKR1Name
  *
- * IEEE 802.11r/D9.0 - 8.5.1.5.4
+ * IEEE Std 802.11r-2008 - 8.5.1.5.4
  */
 void wpa_derive_pmk_r1_name(const u8 *pmk_r0_name, const u8 *r1kh_id,
 			    const u8 *s1kh_id, u8 *pmk_r1_name)
@@ -479,7 +479,7 @@ void wpa_derive_pmk_r1_name(const u8 *pmk_r0_name, const u8 *r1kh_id,
 /**
  * wpa_derive_pmk_r1 - Derive PMK-R1 and PMKR1Name from PMK-R0
  *
- * IEEE 802.11r/D9.0 - 8.5.1.5.4
+ * IEEE Std 802.11r-2008 - 8.5.1.5.4
  */
 void wpa_derive_pmk_r1(const u8 *pmk_r0, const u8 *pmk_r0_name,
 		       const u8 *r1kh_id, const u8 *s1kh_id,
@@ -504,7 +504,7 @@ void wpa_derive_pmk_r1(const u8 *pmk_r0, const u8 *pmk_r0_name,
 /**
  * wpa_pmk_r1_to_ptk - Derive PTK and PTKName from PMK-R1
  *
- * IEEE 802.11r/D9.0 - 8.5.1.5.5
+ * IEEE Std 802.11r-2008 - 8.5.1.5.5
  */
 void wpa_pmk_r1_to_ptk(const u8 *pmk_r1, const u8 *snonce, const u8 *anonce,
 		       const u8 *sta_addr, const u8 *bssid,

src/rsn_supp/wpa_ft.c

@@ -243,7 +243,7 @@ static u8 * wpa_ft_gen_req_ies(struct wpa_sm *sm, size_t *len,
 
 	if (kck) {
 		/*
-		 * IEEE 802.11r/D9.0, 11A.8.4
+		 * IEEE Std 802.11r-2008, 11A.8.4
 		 * MIC shall be calculated over:
 		 * non-AP STA MAC address
 		 * Target AP MAC address

wpa_supplicant/defconfig

@@ -353,10 +353,7 @@ CONFIG_PEERKEY=y
 #WIRELESS_DEV=/usr/src/wireless-dev
 #CFLAGS += -I$(WIRELESS_DEV)/net/mac80211
 
-# IEEE 802.11r/D4.1 (Fast BSS Transition)
-# This enables an experimental implementation of a draft version of
-# IEEE 802.11r. This draft is still subject to change, so it should be noted
-# that this version may not comply with the final standard.
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y
 
 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)