tests: Increase timeout in wpas_mesh_password_mismatch

There has been number of failures from this test case due to the
MESH-SAE-AUTH-FAILURE event from dev[0] and dev[1] arriving couple of
seconds after the one second timeout after the dev[2] events. This does
not look like a real issue, so increase the timeout to five seconds to
make this less likely to show false failures during testing.

Signed-off-by: Jouni Malinen <j@w1.fi>

tests/hwsim/test_wpas_mesh.py

@@ -897,23 +897,26 @@ def test_wpas_mesh_password_mismatch(dev, apdev):
     ev = dev[2].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=20)
     if ev is None:
         raise Exception("dev2 did not report auth failure (2)")
+    dev[2].dump_monitor()
 
     count = 0
-    ev = dev[0].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=1)
+    ev = dev[0].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=5)
     if ev is None:
         logger.info("dev0 did not report auth failure")
     else:
         if "addr=" + dev[2].own_addr() not in ev:
             raise Exception("Unexpected peer address in dev0 event: " + ev)
         count += 1
+    dev[0].dump_monitor()
 
-    ev = dev[1].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=1)
+    ev = dev[1].wait_event(["MESH-SAE-AUTH-FAILURE"], timeout=5)
     if ev is None:
         logger.info("dev1 did not report auth failure")
     else:
         if "addr=" + dev[2].own_addr() not in ev:
             raise Exception("Unexpected peer address in dev1 event: " + ev)
         count += 1
+    dev[1].dump_monitor()
 
     hwsim_utils.test_connectivity(dev[0], dev[1])