Sync with mac80211-next.git include/uapi/linux/nl80211.h

This brings in nl80211 definitions as of 2016-10-27.

Signed-off-by: Jouni Malinen <j@w1.fi>

src/drivers/nl80211_copy.h

@@ -48,6 +48,7 @@
 #define NL80211_MULTICAST_GROUP_REG		"regulatory"
 #define NL80211_MULTICAST_GROUP_MLME		"mlme"
 #define NL80211_MULTICAST_GROUP_VENDOR		"vendor"
+#define NL80211_MULTICAST_GROUP_NAN		"nan"
 #define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
 
 /**
@@ -838,6 +839,41 @@
  *	not running. The driver indicates the status of the scan through
  *	cfg80211_scan_done().
  *
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+ *	%NL80211_ATTR_WDEV interface. This interface must have been previously
+ *	created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
+ *	NAN interface will create or join a cluster. This command must have a
+ *	valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+ *	%NL80211_ATTR_NAN_DUAL attributes.
+ *	After this command NAN functions can be added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ *	its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+ *	with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this
+ *	operation returns the strictly positive and unique instance id
+ *	(%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE)
+ *	of the function upon success.
+ *	Since instance ID's can be re-used, this cookie is the right
+ *	way to identify the function. This will avoid races when a termination
+ *	event is handled by the user space after it has already added a new
+ *	function that got the same instance id from the kernel as the one
+ *	which just terminated.
+ *	This cookie may be used in NAN events even before the command
+ *	returns, so userspace shouldn't process NAN events until it processes
+ *	the response to this command.
+ *	Look at %NL80211_ATTR_SOCKET_OWNER as well.
+ * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie.
+ *	This command is also used as a notification sent when a NAN function is
+ *	terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ *	and %NL80211_ATTR_COOKIE attributes.
+ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
+ *	must be operational (%NL80211_CMD_START_NAN was executed).
+ *	It must contain at least one of the following attributes:
+ *	%NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
+ *	This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
+ *	%NL80211_ATTR_COOKIE.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1026,6 +1062,13 @@ enum nl80211_commands {
 
 	NL80211_CMD_ABORT_SCAN,
 
+	NL80211_CMD_START_NAN,
+	NL80211_CMD_STOP_NAN,
+	NL80211_CMD_ADD_NAN_FUNCTION,
+	NL80211_CMD_DEL_NAN_FUNCTION,
+	NL80211_CMD_CHANGE_NAN_CONFIG,
+	NL80211_CMD_NAN_MATCH,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1343,7 +1386,13 @@ enum nl80211_commands {
  *	enum nl80211_band value is used as the index (nla_type() of the nested
  *	data. If a band is not included, it will be configured to allow all
  *	rates based on negotiated supported rates information. This attribute
- *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP,
+ *	and joining mesh networks (not IBSS yet). In the later case, it must
+ *	specify just a single bitrate, which is to be used for the beacon.
+ *	The driver must also specify support for this with the extended
+ *	features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+ *	NL80211_EXT_FEATURE_BEACON_RATE_HT and
+ *	NL80211_EXT_FEATURE_BEACON_RATE_VHT.
  *
  * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain
  *	at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME.
@@ -1589,8 +1638,16 @@ enum nl80211_commands {
  *	the connection request from a station. nl80211_connect_failed_reason
  *	enum has different reasons of connection failure.
  *
- * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts
- *	with the Authentication transaction sequence number field.
+ * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames.
+ *	This contains the authentication frame body (non-IE and IE data),
+ *	excluding the Authentication algorithm number, i.e., starting at the
+ *	Authentication transaction sequence number field. It is used with
+ *	authentication algorithms that need special fields to be added into
+ *	the frames (SAE and FILS). Currently, only the SAE cases use the
+ *	initial two fields (Authentication transaction sequence number and
+ *	Status code). However, those fields are included in the attribute data
+ *	for all authentication algorithms to keep the attribute definition
+ *	consistent.
  *
  * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
@@ -1733,6 +1790,12 @@ enum nl80211_commands {
  *	regulatory indoor configuration would be owned by the netlink socket
  *	that configured the indoor setting, and the indoor operation would be
  *	cleared when the socket is closed.
+ *	If set during NAN interface creation, the interface will be destroyed
+ *	if the socket is closed just like any other interface. Moreover, only
+ *	the netlink socket that created the interface will be allowed to add
+ *	and remove functions. NAN notifications will be sent in unicast to that
+ *	socket. Without this attribute, any socket can add functions and the
+ *	notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
  *
  * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
  *	the TDLS link initiator.
@@ -1867,6 +1930,26 @@ enum nl80211_commands {
  * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is
  *	used to pull the stored data for mesh peer in power save state.
  *
+ * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by
+ *	%NL80211_CMD_START_NAN and optionally with
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ *	Also, values 1 and 255 are reserved for certification purposes and
+ *	should not be used during a normal device operation.
+ * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
+ *	&enum nl80211_nan_dual_band_conf). This attribute is used with
+ *	%NL80211_CMD_START_NAN and optionally with
+ *	%NL80211_CMD_CHANGE_NAN_CONFIG.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ *	&enum nl80211_nan_func_attributes for description of this nested
+ *	attribute.
+ * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
+ *	See &enum nl80211_nan_match_attributes.
+ * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame
+ *	protection.
+ * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association
+ *	Request/Response frame protection. This attribute contains the 16 octet
+ *	STA Nonce followed by 16 octets of AP Nonce.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2125,7 +2208,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_CONN_FAILED_REASON,
 
-	NL80211_ATTR_SAE_DATA,
+	NL80211_ATTR_AUTH_DATA,
 
 	NL80211_ATTR_VHT_CAPABILITY,
 
@@ -2261,6 +2344,14 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MESH_PEER_AID,
 
+	NL80211_ATTR_NAN_MASTER_PREF,
+	NL80211_ATTR_NAN_DUAL,
+	NL80211_ATTR_NAN_FUNC,
+	NL80211_ATTR_NAN_MATCH,
+
+	NL80211_ATTR_FILS_KEK,
+	NL80211_ATTR_FILS_NONCES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2272,6 +2363,7 @@ enum nl80211_attrs {
 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
 #define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
+#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
@@ -2339,6 +2431,7 @@ enum nl80211_attrs {
  *	commands to create and destroy one
  * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
  *	This mode corresponds to the MIB variable dot11OCBActivated=true
+ * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
  * @NUM_NL80211_IFTYPES: number of defined interface types
  *
@@ -2359,6 +2452,7 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_P2P_GO,
 	NL80211_IFTYPE_P2P_DEVICE,
 	NL80211_IFTYPE_OCB,
+	NL80211_IFTYPE_NAN,
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -3583,6 +3677,9 @@ enum nl80211_bss_status {
  * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
  * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
  * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
+ * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key
+ * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS
+ * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key
  * @__NL80211_AUTHTYPE_NUM: internal
  * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
  * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
@@ -3595,6 +3692,9 @@ enum nl80211_auth_type {
 	NL80211_AUTHTYPE_FT,
 	NL80211_AUTHTYPE_NETWORK_EAP,
 	NL80211_AUTHTYPE_SAE,
+	NL80211_AUTHTYPE_FILS_SK,
+	NL80211_AUTHTYPE_FILS_SK_PFS,
+	NL80211_AUTHTYPE_FILS_PK,
 
 	/* keep last */
 	__NL80211_AUTHTYPE_NUM,
@@ -4203,6 +4303,9 @@ enum nl80211_iface_limit_attrs {
  *	of supported channel widths for radar detection.
  * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
  *	of supported regulatory regions for radar detection.
+ * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
+ *	different beacon intervals supported by all the interface combinations
+ *	in this group (if not present, all beacon intervals be identical).
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -4210,8 +4313,8 @@ enum nl80211_iface_limit_attrs {
  *	limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
  *	=> allows an AP and a STA that must match BIs
  *
- *	numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8
- *	=> allows 8 of AP/GO
+ *	numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8,
+ *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
  *
  *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
  *	=> allows two STAs on different channels
@@ -4237,6 +4340,7 @@ enum nl80211_if_combination_attrs {
 	NL80211_IFACE_COMB_NUM_CHANNELS,
 	NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
 	NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
+	NL80211_IFACE_COMB_BI_MIN_GCD,
 
 	/* keep last */
 	NUM_NL80211_IFACE_COMB,
@@ -4551,6 +4655,14 @@ enum nl80211_feature_flags {
  *	(if available).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
+ *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
+ *	configuration (AP/mesh) with HT rates.
+ * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
+ *	configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup
+ *	with user space SME (NL80211_CMD_AUTHENTICATE) in station mode.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4562,6 +4674,10 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SCAN_START_TIME,
 	NL80211_EXT_FEATURE_BSS_PARENT_TSF,
 	NL80211_EXT_FEATURE_SET_SCAN_DWELL,
+	NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
+	NL80211_EXT_FEATURE_BEACON_RATE_HT,
+	NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+	NL80211_EXT_FEATURE_FILS_STA,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -4855,4 +4971,186 @@ enum nl80211_bss_select_attr {
 	NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1
 };
 
+/**
+ * enum nl80211_nan_dual_band_conf - NAN dual band configuration
+ *
+ * Defines the NAN dual band mode of operation
+ *
+ * @NL80211_NAN_BAND_DEFAULT: device default mode
+ * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
+ * @NL80211_NAN_BAND_5GHZ: 5GHz mode
+  */
+enum nl80211_nan_dual_band_conf {
+	NL80211_NAN_BAND_DEFAULT	= 1 << 0,
+	NL80211_NAN_BAND_2GHZ		= 1 << 1,
+	NL80211_NAN_BAND_5GHZ		= 1 << 2,
+};
+
+/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function
+ *
+ * @NL80211_NAN_FUNC_PUBLISH: function is publish
+ * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe
+ * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up
+ */
+enum nl80211_nan_function_type {
+	NL80211_NAN_FUNC_PUBLISH,
+	NL80211_NAN_FUNC_SUBSCRIBE,
+	NL80211_NAN_FUNC_FOLLOW_UP,
+
+	/* keep last */
+	__NL80211_NAN_FUNC_TYPE_AFTER_LAST,
+	NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1,
+};
+
+/**
+ * enum nl80211_nan_publish_type - NAN publish tx type
+ *
+ * Defines how to send publish Service Discovery Frames
+ *
+ * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited
+ * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited
+ */
+enum nl80211_nan_publish_type {
+	NL80211_NAN_SOLICITED_PUBLISH = 1 << 0,
+	NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1,
+};
+
+/**
+ * enum nl80211_nan_func_term_reason - NAN functions termination reason
+ *
+ * Defines termination reasons of a NAN function
+ *
+ * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user
+ * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout
+ * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored
+ */
+enum nl80211_nan_func_term_reason {
+	NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST,
+	NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED,
+	NL80211_NAN_FUNC_TERM_REASON_ERROR,
+};
+
+#define NL80211_NAN_FUNC_SERVICE_ID_LEN 6
+#define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff
+#define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff
+
+/**
+ * enum nl80211_nan_func_attributes - NAN function attributes
+ * @__NL80211_NAN_FUNC_INVALID: invalid
+ * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8).
+ * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as
+ *	specified in NAN spec. This is a binary attribute.
+ * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is
+ *	publish. Defines the transmission type for the publish Service Discovery
+ *	Frame, see &enum nl80211_nan_publish_type. Its type is u8.
+ * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited
+ *	publish. Should the solicited publish Service Discovery Frame be sent to
+ *	the NAN Broadcast address. This is a flag.
+ * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is
+ *	subscribe. Is the subscribe active. This is a flag.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up.
+ *	The instance ID for the follow up Service Discovery Frame. This is u8.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
+ *	is follow up. This is a u8.
+ *	The requestor instance ID for the follow up Service Discovery Frame.
+ * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
+ *	follow up Service Discovery Frame. This is a binary attribute.
+ * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
+ *	close range. The range itself (RSSI) is defined by the device.
+ *	This is a flag.
+ * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should
+ *	stay active. If not present infinite TTL is assumed. This is a u32.
+ * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service
+ *	specific info. This is a binary attribute.
+ * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute.
+ *	See &enum nl80211_nan_srf_attributes.
+ * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested
+ *	attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a
+ *	nested attribute. It is a list of binary values.
+ * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function.
+ *	Its type is u8 and it cannot be 0.
+ * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason.
+ *	See &enum nl80211_nan_func_term_reason.
+ *
+ * @NUM_NL80211_NAN_FUNC_ATTR: internal
+ * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute
+ */
+enum nl80211_nan_func_attributes {
+	__NL80211_NAN_FUNC_INVALID,
+	NL80211_NAN_FUNC_TYPE,
+	NL80211_NAN_FUNC_SERVICE_ID,
+	NL80211_NAN_FUNC_PUBLISH_TYPE,
+	NL80211_NAN_FUNC_PUBLISH_BCAST,
+	NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE,
+	NL80211_NAN_FUNC_FOLLOW_UP_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID,
+	NL80211_NAN_FUNC_FOLLOW_UP_DEST,
+	NL80211_NAN_FUNC_CLOSE_RANGE,
+	NL80211_NAN_FUNC_TTL,
+	NL80211_NAN_FUNC_SERVICE_INFO,
+	NL80211_NAN_FUNC_SRF,
+	NL80211_NAN_FUNC_RX_MATCH_FILTER,
+	NL80211_NAN_FUNC_TX_MATCH_FILTER,
+	NL80211_NAN_FUNC_INSTANCE_ID,
+	NL80211_NAN_FUNC_TERM_REASON,
+
+	/* keep last */
+	NUM_NL80211_NAN_FUNC_ATTR,
+	NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1
+};
+
+/**
+ * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes
+ * @__NL80211_NAN_SRF_INVALID: invalid
+ * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set.
+ *	This is a flag.
+ * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if
+ *	&NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary.
+ * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if
+ *	&NL80211_NAN_SRF_BF is present. This is a u8.
+ * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if
+ *	and only if &NL80211_NAN_SRF_BF isn't present. This is a nested
+ *	attribute. Each nested attribute is a MAC address.
+ * @NUM_NL80211_NAN_SRF_ATTR: internal
+ * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute
+ */
+enum nl80211_nan_srf_attributes {
+	__NL80211_NAN_SRF_INVALID,
+	NL80211_NAN_SRF_INCLUDE,
+	NL80211_NAN_SRF_BF,
+	NL80211_NAN_SRF_BF_IDX,
+	NL80211_NAN_SRF_MAC_ADDRS,
+
+	/* keep last */
+	NUM_NL80211_NAN_SRF_ATTR,
+	NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1,
+};
+
+/**
+ * enum nl80211_nan_match_attributes - NAN match attributes
+ * @__NL80211_NAN_MATCH_INVALID: invalid
+ * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the
+ *	match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ * @NL80211_NAN_MATCH_FUNC_PEER: the peer function
+ *	that caused the match. This is a nested attribute.
+ *	See &enum nl80211_nan_func_attributes.
+ *
+ * @NUM_NL80211_NAN_MATCH_ATTR: internal
+ * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute
+ */
+enum nl80211_nan_match_attributes {
+	__NL80211_NAN_MATCH_INVALID,
+	NL80211_NAN_MATCH_FUNC_LOCAL,
+	NL80211_NAN_MATCH_FUNC_PEER,
+
+	/* keep last */
+	NUM_NL80211_NAN_MATCH_ATTR,
+	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
+};
+
 #endif /* __LINUX_NL80211_H */