Capability matching for 60 GHz band

On the DMG (60 GHz) band, capability bits defined differently from
non-DMG ones. Adjust capability matching to cover both cases.

Also, for non-DMG bands, check ESS bit is set.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>

src/drivers/driver.h

@@ -122,6 +122,13 @@ struct hostapd_hw_modes {
 #define IEEE80211_CAP_IBSS	0x0002
 #define IEEE80211_CAP_PRIVACY	0x0010
 
+/* DMG (60 GHz) IEEE 802.11ad */
+/* type - bits 0..1 */
+#define IEEE80211_CAP_DMG_MASK	0x0003
+#define IEEE80211_CAP_DMG_IBSS	0x0001 /* Tx by: STA */
+#define IEEE80211_CAP_DMG_PBSS	0x0002 /* Tx by: PCP */
+#define IEEE80211_CAP_DMG_AP	0x0003 /* Tx by: AP */
+
 #define WPA_SCAN_QUAL_INVALID		BIT(0)
 #define WPA_SCAN_NOISE_INVALID		BIT(1)
 #define WPA_SCAN_LEVEL_INVALID		BIT(2)

wpa_supplicant/events.c

@@ -636,6 +636,28 @@ static int rate_match(struct wpa_supplicant *wpa_s, struct wpa_bss *bss)
 }
 
 
+static int bss_is_dmg(struct wpa_bss *bss)
+{
+	return bss->freq > 45000;
+}
+
+
+/*
+ * Test whether BSS is in an ESS.
+ * This is done differently in DMG (60 GHz) and non-DMG bands
+ */
+static int bss_is_ess(struct wpa_bss *bss)
+{
+	if (bss_is_dmg(bss)) {
+		return (bss->caps & IEEE80211_CAP_DMG_MASK) ==
+			IEEE80211_CAP_DMG_AP;
+	}
+
+	return ((bss->caps & (IEEE80211_CAP_ESS | IEEE80211_CAP_IBSS)) ==
+		IEEE80211_CAP_ESS);
+}
+
+
 static struct wpa_ssid * wpa_scan_res_match(struct wpa_supplicant *wpa_s,
 					    int i, struct wpa_bss *bss,
 					    struct wpa_ssid *group)
@@ -769,9 +791,8 @@ static struct wpa_ssid * wpa_scan_res_match(struct wpa_supplicant *wpa_s,
 			continue;
 		}
 
-		if (bss->caps & IEEE80211_CAP_IBSS) {
-			wpa_dbg(wpa_s, MSG_DEBUG, "   skip - IBSS (adhoc) "
-				"network");
+		if (!bss_is_ess(bss)) {
+			wpa_dbg(wpa_s, MSG_DEBUG, "   skip - not ESS network");
 			continue;
 		}