sme.c 47 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664
  1. /*
  2. * wpa_supplicant - SME
  3. * Copyright (c) 2009-2014, Jouni Malinen <j@w1.fi>
  4. *
  5. * This software may be distributed under the terms of the BSD license.
  6. * See README for more details.
  7. */
  8. #include "includes.h"
  9. #include "common.h"
  10. #include "utils/eloop.h"
  11. #include "common/ieee802_11_defs.h"
  12. #include "common/ieee802_11_common.h"
  13. #include "eapol_supp/eapol_supp_sm.h"
  14. #include "common/wpa_common.h"
  15. #include "common/sae.h"
  16. #include "rsn_supp/wpa.h"
  17. #include "rsn_supp/pmksa_cache.h"
  18. #include "config.h"
  19. #include "wpa_supplicant_i.h"
  20. #include "driver_i.h"
  21. #include "wpas_glue.h"
  22. #include "wps_supplicant.h"
  23. #include "p2p_supplicant.h"
  24. #include "notify.h"
  25. #include "bss.h"
  26. #include "scan.h"
  27. #include "sme.h"
  28. #include "hs20_supplicant.h"
  29. #define SME_AUTH_TIMEOUT 5
  30. #define SME_ASSOC_TIMEOUT 5
  31. static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx);
  32. static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx);
  33. static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx);
  34. #ifdef CONFIG_IEEE80211W
  35. static void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
  36. #endif /* CONFIG_IEEE80211W */
  37. #ifdef CONFIG_SAE
  38. static int index_within_array(const int *array, int idx)
  39. {
  40. int i;
  41. for (i = 0; i < idx; i++) {
  42. if (array[i] <= 0)
  43. return 0;
  44. }
  45. return 1;
  46. }
  47. static int sme_set_sae_group(struct wpa_supplicant *wpa_s)
  48. {
  49. int *groups = wpa_s->conf->sae_groups;
  50. int default_groups[] = { 19, 20, 21, 25, 26, 0 };
  51. if (!groups || groups[0] <= 0)
  52. groups = default_groups;
  53. /* Configuration may have changed, so validate current index */
  54. if (!index_within_array(groups, wpa_s->sme.sae_group_index))
  55. return -1;
  56. for (;;) {
  57. int group = groups[wpa_s->sme.sae_group_index];
  58. if (group <= 0)
  59. break;
  60. if (sae_set_group(&wpa_s->sme.sae, group) == 0) {
  61. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected SAE group %d",
  62. wpa_s->sme.sae.group);
  63. return 0;
  64. }
  65. wpa_s->sme.sae_group_index++;
  66. }
  67. return -1;
  68. }
  69. static struct wpabuf * sme_auth_build_sae_commit(struct wpa_supplicant *wpa_s,
  70. struct wpa_ssid *ssid,
  71. const u8 *bssid)
  72. {
  73. struct wpabuf *buf;
  74. size_t len;
  75. if (ssid->passphrase == NULL) {
  76. wpa_printf(MSG_DEBUG, "SAE: No password available");
  77. return NULL;
  78. }
  79. if (sme_set_sae_group(wpa_s) < 0) {
  80. wpa_printf(MSG_DEBUG, "SAE: Failed to select group");
  81. return NULL;
  82. }
  83. if (sae_prepare_commit(wpa_s->own_addr, bssid,
  84. (u8 *) ssid->passphrase,
  85. os_strlen(ssid->passphrase),
  86. &wpa_s->sme.sae) < 0) {
  87. wpa_printf(MSG_DEBUG, "SAE: Could not pick PWE");
  88. return NULL;
  89. }
  90. len = wpa_s->sme.sae_token ? wpabuf_len(wpa_s->sme.sae_token) : 0;
  91. buf = wpabuf_alloc(4 + SAE_COMMIT_MAX_LEN + len);
  92. if (buf == NULL)
  93. return NULL;
  94. wpabuf_put_le16(buf, 1); /* Transaction seq# */
  95. wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
  96. sae_write_commit(&wpa_s->sme.sae, buf, wpa_s->sme.sae_token);
  97. return buf;
  98. }
  99. static struct wpabuf * sme_auth_build_sae_confirm(struct wpa_supplicant *wpa_s)
  100. {
  101. struct wpabuf *buf;
  102. buf = wpabuf_alloc(4 + SAE_CONFIRM_MAX_LEN);
  103. if (buf == NULL)
  104. return NULL;
  105. wpabuf_put_le16(buf, 2); /* Transaction seq# */
  106. wpabuf_put_le16(buf, WLAN_STATUS_SUCCESS);
  107. sae_write_confirm(&wpa_s->sme.sae, buf);
  108. return buf;
  109. }
  110. #endif /* CONFIG_SAE */
  111. /**
  112. * sme_auth_handle_rrm - Handle RRM aspects of current authentication attempt
  113. * @wpa_s: Pointer to wpa_supplicant data
  114. * @bss: Pointer to the bss which is the target of authentication attempt
  115. */
  116. static void sme_auth_handle_rrm(struct wpa_supplicant *wpa_s,
  117. struct wpa_bss *bss)
  118. {
  119. const u8 rrm_ie_len = 5;
  120. u8 *pos;
  121. const u8 *rrm_ie;
  122. wpa_s->rrm.rrm_used = 0;
  123. wpa_printf(MSG_DEBUG,
  124. "RRM: Determining whether RRM can be used - device support: 0x%x",
  125. wpa_s->drv_rrm_flags);
  126. rrm_ie = wpa_bss_get_ie(bss, WLAN_EID_RRM_ENABLED_CAPABILITIES);
  127. if (!rrm_ie || !(bss->caps & IEEE80211_CAP_RRM)) {
  128. wpa_printf(MSG_DEBUG, "RRM: No RRM in network");
  129. return;
  130. }
  131. if (!(wpa_s->drv_rrm_flags &
  132. WPA_DRIVER_FLAGS_DS_PARAM_SET_IE_IN_PROBES) ||
  133. !(wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_QUIET)) {
  134. wpa_printf(MSG_DEBUG,
  135. "RRM: Insufficient RRM support in driver - do not use RRM");
  136. return;
  137. }
  138. if (sizeof(wpa_s->sme.assoc_req_ie) <
  139. wpa_s->sme.assoc_req_ie_len + rrm_ie_len + 2) {
  140. wpa_printf(MSG_INFO,
  141. "RRM: Unable to use RRM, no room for RRM IE");
  142. return;
  143. }
  144. wpa_printf(MSG_DEBUG, "RRM: Adding RRM IE to Association Request");
  145. pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
  146. os_memset(pos, 0, 2 + rrm_ie_len);
  147. *pos++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
  148. *pos++ = rrm_ie_len;
  149. /* Set supported capabilites flags */
  150. if (wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION)
  151. *pos |= WLAN_RRM_CAPS_LINK_MEASUREMENT;
  152. wpa_s->sme.assoc_req_ie_len += rrm_ie_len + 2;
  153. wpa_s->rrm.rrm_used = 1;
  154. }
  155. static void sme_send_authentication(struct wpa_supplicant *wpa_s,
  156. struct wpa_bss *bss, struct wpa_ssid *ssid,
  157. int start)
  158. {
  159. struct wpa_driver_auth_params params;
  160. struct wpa_ssid *old_ssid;
  161. #ifdef CONFIG_IEEE80211R
  162. const u8 *ie;
  163. #endif /* CONFIG_IEEE80211R */
  164. #ifdef CONFIG_IEEE80211R
  165. const u8 *md = NULL;
  166. #endif /* CONFIG_IEEE80211R */
  167. int i, bssid_changed;
  168. struct wpabuf *resp = NULL;
  169. u8 ext_capab[18];
  170. int ext_capab_len;
  171. int skip_auth;
  172. if (bss == NULL) {
  173. wpa_msg(wpa_s, MSG_ERROR, "SME: No scan result available for "
  174. "the network");
  175. wpas_connect_work_done(wpa_s);
  176. return;
  177. }
  178. skip_auth = wpa_s->conf->reassoc_same_bss_optim &&
  179. wpa_s->reassoc_same_bss;
  180. wpa_s->current_bss = bss;
  181. os_memset(&params, 0, sizeof(params));
  182. wpa_s->reassociate = 0;
  183. params.freq = bss->freq;
  184. params.bssid = bss->bssid;
  185. params.ssid = bss->ssid;
  186. params.ssid_len = bss->ssid_len;
  187. params.p2p = ssid->p2p_group;
  188. if (wpa_s->sme.ssid_len != params.ssid_len ||
  189. os_memcmp(wpa_s->sme.ssid, params.ssid, params.ssid_len) != 0)
  190. wpa_s->sme.prev_bssid_set = 0;
  191. wpa_s->sme.freq = params.freq;
  192. os_memcpy(wpa_s->sme.ssid, params.ssid, params.ssid_len);
  193. wpa_s->sme.ssid_len = params.ssid_len;
  194. params.auth_alg = WPA_AUTH_ALG_OPEN;
  195. #ifdef IEEE8021X_EAPOL
  196. if (ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) {
  197. if (ssid->leap) {
  198. if (ssid->non_leap == 0)
  199. params.auth_alg = WPA_AUTH_ALG_LEAP;
  200. else
  201. params.auth_alg |= WPA_AUTH_ALG_LEAP;
  202. }
  203. }
  204. #endif /* IEEE8021X_EAPOL */
  205. wpa_dbg(wpa_s, MSG_DEBUG, "Automatic auth_alg selection: 0x%x",
  206. params.auth_alg);
  207. if (ssid->auth_alg) {
  208. params.auth_alg = ssid->auth_alg;
  209. wpa_dbg(wpa_s, MSG_DEBUG, "Overriding auth_alg selection: "
  210. "0x%x", params.auth_alg);
  211. }
  212. #ifdef CONFIG_SAE
  213. wpa_s->sme.sae_pmksa_caching = 0;
  214. if (wpa_key_mgmt_sae(ssid->key_mgmt)) {
  215. const u8 *rsn;
  216. struct wpa_ie_data ied;
  217. rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
  218. if (!rsn) {
  219. wpa_dbg(wpa_s, MSG_DEBUG,
  220. "SAE enabled, but target BSS does not advertise RSN");
  221. } else if (wpa_parse_wpa_ie(rsn, 2 + rsn[1], &ied) == 0 &&
  222. wpa_key_mgmt_sae(ied.key_mgmt)) {
  223. wpa_dbg(wpa_s, MSG_DEBUG, "Using SAE auth_alg");
  224. params.auth_alg = WPA_AUTH_ALG_SAE;
  225. } else {
  226. wpa_dbg(wpa_s, MSG_DEBUG,
  227. "SAE enabled, but target BSS does not advertise SAE AKM for RSN");
  228. }
  229. }
  230. #endif /* CONFIG_SAE */
  231. for (i = 0; i < NUM_WEP_KEYS; i++) {
  232. if (ssid->wep_key_len[i])
  233. params.wep_key[i] = ssid->wep_key[i];
  234. params.wep_key_len[i] = ssid->wep_key_len[i];
  235. }
  236. params.wep_tx_keyidx = ssid->wep_tx_keyidx;
  237. bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
  238. os_memset(wpa_s->bssid, 0, ETH_ALEN);
  239. os_memcpy(wpa_s->pending_bssid, bss->bssid, ETH_ALEN);
  240. if (bssid_changed)
  241. wpas_notify_bssid_changed(wpa_s);
  242. if ((wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE) ||
  243. wpa_bss_get_ie(bss, WLAN_EID_RSN)) &&
  244. wpa_key_mgmt_wpa(ssid->key_mgmt)) {
  245. int try_opportunistic;
  246. try_opportunistic = (ssid->proactive_key_caching < 0 ?
  247. wpa_s->conf->okc :
  248. ssid->proactive_key_caching) &&
  249. (ssid->proto & WPA_PROTO_RSN);
  250. if (pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid,
  251. wpa_s->current_ssid,
  252. try_opportunistic) == 0)
  253. eapol_sm_notify_pmkid_attempt(wpa_s->eapol);
  254. wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
  255. if (wpa_supplicant_set_suites(wpa_s, bss, ssid,
  256. wpa_s->sme.assoc_req_ie,
  257. &wpa_s->sme.assoc_req_ie_len)) {
  258. wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
  259. "key management and encryption suites");
  260. wpas_connect_work_done(wpa_s);
  261. return;
  262. }
  263. } else if ((ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) &&
  264. wpa_key_mgmt_wpa_ieee8021x(ssid->key_mgmt)) {
  265. /*
  266. * Both WPA and non-WPA IEEE 802.1X enabled in configuration -
  267. * use non-WPA since the scan results did not indicate that the
  268. * AP is using WPA or WPA2.
  269. */
  270. wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
  271. wpa_s->sme.assoc_req_ie_len = 0;
  272. } else if (wpa_key_mgmt_wpa_any(ssid->key_mgmt)) {
  273. wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
  274. if (wpa_supplicant_set_suites(wpa_s, NULL, ssid,
  275. wpa_s->sme.assoc_req_ie,
  276. &wpa_s->sme.assoc_req_ie_len)) {
  277. wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
  278. "key management and encryption suites (no "
  279. "scan results)");
  280. wpas_connect_work_done(wpa_s);
  281. return;
  282. }
  283. #ifdef CONFIG_WPS
  284. } else if (ssid->key_mgmt & WPA_KEY_MGMT_WPS) {
  285. struct wpabuf *wps_ie;
  286. wps_ie = wps_build_assoc_req_ie(wpas_wps_get_req_type(ssid));
  287. if (wps_ie && wpabuf_len(wps_ie) <=
  288. sizeof(wpa_s->sme.assoc_req_ie)) {
  289. wpa_s->sme.assoc_req_ie_len = wpabuf_len(wps_ie);
  290. os_memcpy(wpa_s->sme.assoc_req_ie, wpabuf_head(wps_ie),
  291. wpa_s->sme.assoc_req_ie_len);
  292. } else
  293. wpa_s->sme.assoc_req_ie_len = 0;
  294. wpabuf_free(wps_ie);
  295. wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
  296. #endif /* CONFIG_WPS */
  297. } else {
  298. wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
  299. wpa_s->sme.assoc_req_ie_len = 0;
  300. }
  301. #ifdef CONFIG_IEEE80211R
  302. ie = wpa_bss_get_ie(bss, WLAN_EID_MOBILITY_DOMAIN);
  303. if (ie && ie[1] >= MOBILITY_DOMAIN_ID_LEN)
  304. md = ie + 2;
  305. wpa_sm_set_ft_params(wpa_s->wpa, ie, ie ? 2 + ie[1] : 0);
  306. if (md) {
  307. /* Prepare for the next transition */
  308. wpa_ft_prepare_auth_request(wpa_s->wpa, ie);
  309. }
  310. if (md && wpa_key_mgmt_ft(ssid->key_mgmt)) {
  311. if (wpa_s->sme.assoc_req_ie_len + 5 <
  312. sizeof(wpa_s->sme.assoc_req_ie)) {
  313. struct rsn_mdie *mdie;
  314. u8 *pos = wpa_s->sme.assoc_req_ie +
  315. wpa_s->sme.assoc_req_ie_len;
  316. *pos++ = WLAN_EID_MOBILITY_DOMAIN;
  317. *pos++ = sizeof(*mdie);
  318. mdie = (struct rsn_mdie *) pos;
  319. os_memcpy(mdie->mobility_domain, md,
  320. MOBILITY_DOMAIN_ID_LEN);
  321. mdie->ft_capab = md[MOBILITY_DOMAIN_ID_LEN];
  322. wpa_s->sme.assoc_req_ie_len += 5;
  323. }
  324. if (wpa_s->sme.ft_used &&
  325. os_memcmp(md, wpa_s->sme.mobility_domain, 2) == 0 &&
  326. wpa_sm_has_ptk(wpa_s->wpa)) {
  327. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying to use FT "
  328. "over-the-air");
  329. params.auth_alg = WPA_AUTH_ALG_FT;
  330. params.ie = wpa_s->sme.ft_ies;
  331. params.ie_len = wpa_s->sme.ft_ies_len;
  332. }
  333. }
  334. #endif /* CONFIG_IEEE80211R */
  335. #ifdef CONFIG_IEEE80211W
  336. wpa_s->sme.mfp = wpas_get_ssid_pmf(wpa_s, ssid);
  337. if (wpa_s->sme.mfp != NO_MGMT_FRAME_PROTECTION) {
  338. const u8 *rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
  339. struct wpa_ie_data _ie;
  340. if (rsn && wpa_parse_wpa_ie(rsn, 2 + rsn[1], &_ie) == 0 &&
  341. _ie.capabilities &
  342. (WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR)) {
  343. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected AP supports "
  344. "MFP: require MFP");
  345. wpa_s->sme.mfp = MGMT_FRAME_PROTECTION_REQUIRED;
  346. }
  347. }
  348. #endif /* CONFIG_IEEE80211W */
  349. #ifdef CONFIG_P2P
  350. if (wpa_s->global->p2p) {
  351. u8 *pos;
  352. size_t len;
  353. int res;
  354. pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
  355. len = sizeof(wpa_s->sme.assoc_req_ie) -
  356. wpa_s->sme.assoc_req_ie_len;
  357. res = wpas_p2p_assoc_req_ie(wpa_s, bss, pos, len,
  358. ssid->p2p_group);
  359. if (res >= 0)
  360. wpa_s->sme.assoc_req_ie_len += res;
  361. }
  362. #endif /* CONFIG_P2P */
  363. #ifdef CONFIG_HS20
  364. if (is_hs20_network(wpa_s, ssid, bss)) {
  365. struct wpabuf *hs20;
  366. hs20 = wpabuf_alloc(20);
  367. if (hs20) {
  368. int pps_mo_id = hs20_get_pps_mo_id(wpa_s, ssid);
  369. size_t len;
  370. wpas_hs20_add_indication(hs20, pps_mo_id);
  371. len = sizeof(wpa_s->sme.assoc_req_ie) -
  372. wpa_s->sme.assoc_req_ie_len;
  373. if (wpabuf_len(hs20) <= len) {
  374. os_memcpy(wpa_s->sme.assoc_req_ie +
  375. wpa_s->sme.assoc_req_ie_len,
  376. wpabuf_head(hs20), wpabuf_len(hs20));
  377. wpa_s->sme.assoc_req_ie_len += wpabuf_len(hs20);
  378. }
  379. wpabuf_free(hs20);
  380. }
  381. }
  382. #endif /* CONFIG_HS20 */
  383. #ifdef CONFIG_FST
  384. if (wpa_s->fst_ies) {
  385. int fst_ies_len = wpabuf_len(wpa_s->fst_ies);
  386. if (wpa_s->sme.assoc_req_ie_len + fst_ies_len <=
  387. sizeof(wpa_s->sme.assoc_req_ie)) {
  388. os_memcpy(wpa_s->sme.assoc_req_ie +
  389. wpa_s->sme.assoc_req_ie_len,
  390. wpabuf_head(wpa_s->fst_ies),
  391. fst_ies_len);
  392. wpa_s->sme.assoc_req_ie_len += fst_ies_len;
  393. }
  394. }
  395. #endif /* CONFIG_FST */
  396. ext_capab_len = wpas_build_ext_capab(wpa_s, ext_capab,
  397. sizeof(ext_capab));
  398. if (ext_capab_len > 0) {
  399. u8 *pos = wpa_s->sme.assoc_req_ie;
  400. if (wpa_s->sme.assoc_req_ie_len > 0 && pos[0] == WLAN_EID_RSN)
  401. pos += 2 + pos[1];
  402. os_memmove(pos + ext_capab_len, pos,
  403. wpa_s->sme.assoc_req_ie_len -
  404. (pos - wpa_s->sme.assoc_req_ie));
  405. wpa_s->sme.assoc_req_ie_len += ext_capab_len;
  406. os_memcpy(pos, ext_capab, ext_capab_len);
  407. }
  408. if (wpa_s->vendor_elem[VENDOR_ELEM_ASSOC_REQ]) {
  409. struct wpabuf *buf = wpa_s->vendor_elem[VENDOR_ELEM_ASSOC_REQ];
  410. size_t len;
  411. len = sizeof(wpa_s->sme.assoc_req_ie) -
  412. wpa_s->sme.assoc_req_ie_len;
  413. if (wpabuf_len(buf) <= len) {
  414. os_memcpy(wpa_s->sme.assoc_req_ie +
  415. wpa_s->sme.assoc_req_ie_len,
  416. wpabuf_head(buf), wpabuf_len(buf));
  417. wpa_s->sme.assoc_req_ie_len += wpabuf_len(buf);
  418. }
  419. }
  420. sme_auth_handle_rrm(wpa_s, bss);
  421. #ifdef CONFIG_SAE
  422. if (!skip_auth && params.auth_alg == WPA_AUTH_ALG_SAE &&
  423. pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid, ssid, 0) == 0)
  424. {
  425. wpa_dbg(wpa_s, MSG_DEBUG,
  426. "PMKSA cache entry found - try to use PMKSA caching instead of new SAE authentication");
  427. params.auth_alg = WPA_AUTH_ALG_OPEN;
  428. wpa_s->sme.sae_pmksa_caching = 1;
  429. }
  430. if (!skip_auth && params.auth_alg == WPA_AUTH_ALG_SAE) {
  431. if (start)
  432. resp = sme_auth_build_sae_commit(wpa_s, ssid,
  433. bss->bssid);
  434. else
  435. resp = sme_auth_build_sae_confirm(wpa_s);
  436. if (resp == NULL) {
  437. wpas_connection_failed(wpa_s, bss->bssid);
  438. return;
  439. }
  440. params.sae_data = wpabuf_head(resp);
  441. params.sae_data_len = wpabuf_len(resp);
  442. wpa_s->sme.sae.state = start ? SAE_COMMITTED : SAE_CONFIRMED;
  443. }
  444. #endif /* CONFIG_SAE */
  445. wpa_supplicant_cancel_sched_scan(wpa_s);
  446. wpa_supplicant_cancel_scan(wpa_s);
  447. wpa_msg(wpa_s, MSG_INFO, "SME: Trying to authenticate with " MACSTR
  448. " (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
  449. wpa_ssid_txt(params.ssid, params.ssid_len), params.freq);
  450. wpa_clear_keys(wpa_s, bss->bssid);
  451. wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
  452. old_ssid = wpa_s->current_ssid;
  453. wpa_s->current_ssid = ssid;
  454. wpa_supplicant_rsn_supp_set_config(wpa_s, wpa_s->current_ssid);
  455. wpa_supplicant_initiate_eapol(wpa_s);
  456. if (old_ssid != wpa_s->current_ssid)
  457. wpas_notify_network_changed(wpa_s);
  458. #ifdef CONFIG_P2P
  459. /*
  460. * If multi-channel concurrency is not supported, check for any
  461. * frequency conflict. In case of any frequency conflict, remove the
  462. * least prioritized connection.
  463. */
  464. if (wpa_s->num_multichan_concurrent < 2) {
  465. int freq, num;
  466. num = get_shared_radio_freqs(wpa_s, &freq, 1);
  467. if (num > 0 && freq > 0 && freq != params.freq) {
  468. wpa_printf(MSG_DEBUG,
  469. "Conflicting frequency found (%d != %d)",
  470. freq, params.freq);
  471. if (wpas_p2p_handle_frequency_conflicts(wpa_s,
  472. params.freq,
  473. ssid) < 0) {
  474. wpas_connection_failed(wpa_s, bss->bssid);
  475. wpa_supplicant_mark_disassoc(wpa_s);
  476. wpabuf_free(resp);
  477. wpas_connect_work_done(wpa_s);
  478. return;
  479. }
  480. }
  481. }
  482. #endif /* CONFIG_P2P */
  483. if (skip_auth) {
  484. wpa_msg(wpa_s, MSG_DEBUG,
  485. "SME: Skip authentication step on reassoc-to-same-BSS");
  486. wpabuf_free(resp);
  487. sme_associate(wpa_s, ssid->mode, bss->bssid, WLAN_AUTH_OPEN);
  488. return;
  489. }
  490. wpa_s->sme.auth_alg = params.auth_alg;
  491. if (wpa_drv_authenticate(wpa_s, &params) < 0) {
  492. wpa_msg(wpa_s, MSG_INFO, "SME: Authentication request to the "
  493. "driver failed");
  494. wpas_connection_failed(wpa_s, bss->bssid);
  495. wpa_supplicant_mark_disassoc(wpa_s);
  496. wpabuf_free(resp);
  497. wpas_connect_work_done(wpa_s);
  498. return;
  499. }
  500. eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
  501. NULL);
  502. /*
  503. * Association will be started based on the authentication event from
  504. * the driver.
  505. */
  506. wpabuf_free(resp);
  507. }
  508. static void sme_auth_start_cb(struct wpa_radio_work *work, int deinit)
  509. {
  510. struct wpa_connect_work *cwork = work->ctx;
  511. struct wpa_supplicant *wpa_s = work->wpa_s;
  512. if (deinit) {
  513. if (work->started)
  514. wpa_s->connect_work = NULL;
  515. wpas_connect_work_free(cwork);
  516. return;
  517. }
  518. wpa_s->connect_work = work;
  519. if (cwork->bss_removed ||
  520. !wpas_valid_bss_ssid(wpa_s, cwork->bss, cwork->ssid) ||
  521. wpas_network_disabled(wpa_s, cwork->ssid)) {
  522. wpa_dbg(wpa_s, MSG_DEBUG, "SME: BSS/SSID entry for authentication not valid anymore - drop connection attempt");
  523. wpas_connect_work_done(wpa_s);
  524. return;
  525. }
  526. sme_send_authentication(wpa_s, cwork->bss, cwork->ssid, 1);
  527. }
  528. void sme_authenticate(struct wpa_supplicant *wpa_s,
  529. struct wpa_bss *bss, struct wpa_ssid *ssid)
  530. {
  531. struct wpa_connect_work *cwork;
  532. if (bss == NULL || ssid == NULL)
  533. return;
  534. if (wpa_s->connect_work) {
  535. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reject sme_authenticate() call since connect_work exist");
  536. return;
  537. }
  538. if (radio_work_pending(wpa_s, "sme-connect")) {
  539. /*
  540. * The previous sme-connect work might no longer be valid due to
  541. * the fact that the BSS list was updated. In addition, it makes
  542. * sense to adhere to the 'newer' decision.
  543. */
  544. wpa_dbg(wpa_s, MSG_DEBUG,
  545. "SME: Remove previous pending sme-connect");
  546. radio_remove_works(wpa_s, "sme-connect", 0);
  547. }
  548. wpas_abort_ongoing_scan(wpa_s);
  549. cwork = os_zalloc(sizeof(*cwork));
  550. if (cwork == NULL)
  551. return;
  552. cwork->bss = bss;
  553. cwork->ssid = ssid;
  554. cwork->sme = 1;
  555. #ifdef CONFIG_SAE
  556. wpa_s->sme.sae.state = SAE_NOTHING;
  557. wpa_s->sme.sae.send_confirm = 0;
  558. wpa_s->sme.sae_group_index = 0;
  559. #endif /* CONFIG_SAE */
  560. if (radio_add_work(wpa_s, bss->freq, "sme-connect", 1,
  561. sme_auth_start_cb, cwork) < 0)
  562. wpas_connect_work_free(cwork);
  563. }
  564. #ifdef CONFIG_SAE
  565. static int sme_sae_auth(struct wpa_supplicant *wpa_s, u16 auth_transaction,
  566. u16 status_code, const u8 *data, size_t len)
  567. {
  568. int *groups;
  569. wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE authentication transaction %u "
  570. "status code %u", auth_transaction, status_code);
  571. if (auth_transaction == 1 &&
  572. status_code == WLAN_STATUS_ANTI_CLOGGING_TOKEN_REQ &&
  573. wpa_s->sme.sae.state == SAE_COMMITTED &&
  574. wpa_s->current_bss && wpa_s->current_ssid) {
  575. int default_groups[] = { 19, 20, 21, 25, 26, 0 };
  576. u16 group;
  577. groups = wpa_s->conf->sae_groups;
  578. if (!groups || groups[0] <= 0)
  579. groups = default_groups;
  580. if (len < sizeof(le16)) {
  581. wpa_dbg(wpa_s, MSG_DEBUG,
  582. "SME: Too short SAE anti-clogging token request");
  583. return -1;
  584. }
  585. group = WPA_GET_LE16(data);
  586. wpa_dbg(wpa_s, MSG_DEBUG,
  587. "SME: SAE anti-clogging token requested (group %u)",
  588. group);
  589. if (sae_group_allowed(&wpa_s->sme.sae, groups, group) !=
  590. WLAN_STATUS_SUCCESS) {
  591. wpa_dbg(wpa_s, MSG_ERROR,
  592. "SME: SAE group %u of anti-clogging request is invalid",
  593. group);
  594. return -1;
  595. }
  596. wpabuf_free(wpa_s->sme.sae_token);
  597. wpa_s->sme.sae_token = wpabuf_alloc_copy(data + sizeof(le16),
  598. len - sizeof(le16));
  599. sme_send_authentication(wpa_s, wpa_s->current_bss,
  600. wpa_s->current_ssid, 1);
  601. return 0;
  602. }
  603. if (auth_transaction == 1 &&
  604. status_code == WLAN_STATUS_FINITE_CYCLIC_GROUP_NOT_SUPPORTED &&
  605. wpa_s->sme.sae.state == SAE_COMMITTED &&
  606. wpa_s->current_bss && wpa_s->current_ssid) {
  607. wpa_dbg(wpa_s, MSG_DEBUG, "SME: SAE group not supported");
  608. wpa_s->sme.sae_group_index++;
  609. if (sme_set_sae_group(wpa_s) < 0)
  610. return -1; /* no other groups enabled */
  611. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Try next enabled SAE group");
  612. sme_send_authentication(wpa_s, wpa_s->current_bss,
  613. wpa_s->current_ssid, 1);
  614. return 0;
  615. }
  616. if (status_code != WLAN_STATUS_SUCCESS)
  617. return -1;
  618. if (auth_transaction == 1) {
  619. u16 res;
  620. groups = wpa_s->conf->sae_groups;
  621. wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE commit");
  622. if (wpa_s->current_bss == NULL ||
  623. wpa_s->current_ssid == NULL)
  624. return -1;
  625. if (wpa_s->sme.sae.state != SAE_COMMITTED)
  626. return -1;
  627. if (groups && groups[0] <= 0)
  628. groups = NULL;
  629. res = sae_parse_commit(&wpa_s->sme.sae, data, len, NULL, NULL,
  630. groups);
  631. if (res == SAE_SILENTLY_DISCARD) {
  632. wpa_printf(MSG_DEBUG,
  633. "SAE: Drop commit message due to reflection attack");
  634. return 0;
  635. }
  636. if (res != WLAN_STATUS_SUCCESS)
  637. return -1;
  638. if (sae_process_commit(&wpa_s->sme.sae) < 0) {
  639. wpa_printf(MSG_DEBUG, "SAE: Failed to process peer "
  640. "commit");
  641. return -1;
  642. }
  643. wpabuf_free(wpa_s->sme.sae_token);
  644. wpa_s->sme.sae_token = NULL;
  645. sme_send_authentication(wpa_s, wpa_s->current_bss,
  646. wpa_s->current_ssid, 0);
  647. return 0;
  648. } else if (auth_transaction == 2) {
  649. wpa_dbg(wpa_s, MSG_DEBUG, "SME SAE confirm");
  650. if (wpa_s->sme.sae.state != SAE_CONFIRMED)
  651. return -1;
  652. if (sae_check_confirm(&wpa_s->sme.sae, data, len) < 0)
  653. return -1;
  654. wpa_s->sme.sae.state = SAE_ACCEPTED;
  655. sae_clear_temp_data(&wpa_s->sme.sae);
  656. return 1;
  657. }
  658. return -1;
  659. }
  660. #endif /* CONFIG_SAE */
  661. void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data)
  662. {
  663. struct wpa_ssid *ssid = wpa_s->current_ssid;
  664. if (ssid == NULL) {
  665. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
  666. "when network is not selected");
  667. return;
  668. }
  669. if (wpa_s->wpa_state != WPA_AUTHENTICATING) {
  670. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
  671. "when not in authenticating state");
  672. return;
  673. }
  674. if (os_memcmp(wpa_s->pending_bssid, data->auth.peer, ETH_ALEN) != 0) {
  675. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication with "
  676. "unexpected peer " MACSTR,
  677. MAC2STR(data->auth.peer));
  678. return;
  679. }
  680. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication response: peer=" MACSTR
  681. " auth_type=%d auth_transaction=%d status_code=%d",
  682. MAC2STR(data->auth.peer), data->auth.auth_type,
  683. data->auth.auth_transaction, data->auth.status_code);
  684. wpa_hexdump(MSG_MSGDUMP, "SME: Authentication response IEs",
  685. data->auth.ies, data->auth.ies_len);
  686. eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
  687. #ifdef CONFIG_SAE
  688. if (data->auth.auth_type == WLAN_AUTH_SAE) {
  689. int res;
  690. res = sme_sae_auth(wpa_s, data->auth.auth_transaction,
  691. data->auth.status_code, data->auth.ies,
  692. data->auth.ies_len);
  693. if (res < 0) {
  694. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  695. wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
  696. }
  697. if (res != 1)
  698. return;
  699. wpa_printf(MSG_DEBUG, "SME: SAE completed - setting PMK for "
  700. "4-way handshake");
  701. wpa_sm_set_pmk(wpa_s->wpa, wpa_s->sme.sae.pmk, PMK_LEN,
  702. wpa_s->pending_bssid);
  703. }
  704. #endif /* CONFIG_SAE */
  705. if (data->auth.status_code != WLAN_STATUS_SUCCESS) {
  706. char *ie_txt = NULL;
  707. if (data->auth.ies && data->auth.ies_len) {
  708. size_t buflen = 2 * data->auth.ies_len + 1;
  709. ie_txt = os_malloc(buflen);
  710. if (ie_txt) {
  711. wpa_snprintf_hex(ie_txt, buflen, data->auth.ies,
  712. data->auth.ies_len);
  713. }
  714. }
  715. wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_AUTH_REJECT MACSTR
  716. " auth_type=%u auth_transaction=%u status_code=%u ie=%s",
  717. MAC2STR(data->auth.peer), data->auth.auth_type,
  718. data->auth.auth_transaction, data->auth.status_code,
  719. ie_txt);
  720. os_free(ie_txt);
  721. if (data->auth.status_code !=
  722. WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG ||
  723. wpa_s->sme.auth_alg == data->auth.auth_type ||
  724. wpa_s->current_ssid->auth_alg == WPA_AUTH_ALG_LEAP) {
  725. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  726. wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
  727. return;
  728. }
  729. wpas_connect_work_done(wpa_s);
  730. switch (data->auth.auth_type) {
  731. case WLAN_AUTH_OPEN:
  732. wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_SHARED;
  733. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying SHARED auth");
  734. wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
  735. wpa_s->current_ssid);
  736. return;
  737. case WLAN_AUTH_SHARED_KEY:
  738. wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_LEAP;
  739. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying LEAP auth");
  740. wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
  741. wpa_s->current_ssid);
  742. return;
  743. default:
  744. return;
  745. }
  746. }
  747. #ifdef CONFIG_IEEE80211R
  748. if (data->auth.auth_type == WLAN_AUTH_FT) {
  749. if (wpa_ft_process_response(wpa_s->wpa, data->auth.ies,
  750. data->auth.ies_len, 0,
  751. data->auth.peer, NULL, 0) < 0) {
  752. wpa_dbg(wpa_s, MSG_DEBUG,
  753. "SME: FT Authentication response processing failed");
  754. wpa_msg(wpa_s, MSG_INFO, WPA_EVENT_DISCONNECTED "bssid="
  755. MACSTR
  756. " reason=%d locally_generated=1",
  757. MAC2STR(wpa_s->pending_bssid),
  758. WLAN_REASON_DEAUTH_LEAVING);
  759. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  760. wpa_supplicant_mark_disassoc(wpa_s);
  761. return;
  762. }
  763. }
  764. #endif /* CONFIG_IEEE80211R */
  765. sme_associate(wpa_s, ssid->mode, data->auth.peer,
  766. data->auth.auth_type);
  767. }
  768. void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
  769. const u8 *bssid, u16 auth_type)
  770. {
  771. struct wpa_driver_associate_params params;
  772. struct ieee802_11_elems elems;
  773. #ifdef CONFIG_HT_OVERRIDES
  774. struct ieee80211_ht_capabilities htcaps;
  775. struct ieee80211_ht_capabilities htcaps_mask;
  776. #endif /* CONFIG_HT_OVERRIDES */
  777. #ifdef CONFIG_VHT_OVERRIDES
  778. struct ieee80211_vht_capabilities vhtcaps;
  779. struct ieee80211_vht_capabilities vhtcaps_mask;
  780. #endif /* CONFIG_VHT_OVERRIDES */
  781. os_memset(&params, 0, sizeof(params));
  782. params.bssid = bssid;
  783. params.ssid = wpa_s->sme.ssid;
  784. params.ssid_len = wpa_s->sme.ssid_len;
  785. params.freq.freq = wpa_s->sme.freq;
  786. params.bg_scan_period = wpa_s->current_ssid ?
  787. wpa_s->current_ssid->bg_scan_period : -1;
  788. params.wpa_ie = wpa_s->sme.assoc_req_ie_len ?
  789. wpa_s->sme.assoc_req_ie : NULL;
  790. params.wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
  791. params.pairwise_suite = wpa_s->pairwise_cipher;
  792. params.group_suite = wpa_s->group_cipher;
  793. params.key_mgmt_suite = wpa_s->key_mgmt;
  794. params.wpa_proto = wpa_s->wpa_proto;
  795. #ifdef CONFIG_HT_OVERRIDES
  796. os_memset(&htcaps, 0, sizeof(htcaps));
  797. os_memset(&htcaps_mask, 0, sizeof(htcaps_mask));
  798. params.htcaps = (u8 *) &htcaps;
  799. params.htcaps_mask = (u8 *) &htcaps_mask;
  800. wpa_supplicant_apply_ht_overrides(wpa_s, wpa_s->current_ssid, &params);
  801. #endif /* CONFIG_HT_OVERRIDES */
  802. #ifdef CONFIG_VHT_OVERRIDES
  803. os_memset(&vhtcaps, 0, sizeof(vhtcaps));
  804. os_memset(&vhtcaps_mask, 0, sizeof(vhtcaps_mask));
  805. params.vhtcaps = &vhtcaps;
  806. params.vhtcaps_mask = &vhtcaps_mask;
  807. wpa_supplicant_apply_vht_overrides(wpa_s, wpa_s->current_ssid, &params);
  808. #endif /* CONFIG_VHT_OVERRIDES */
  809. #ifdef CONFIG_IEEE80211R
  810. if (auth_type == WLAN_AUTH_FT && wpa_s->sme.ft_ies) {
  811. params.wpa_ie = wpa_s->sme.ft_ies;
  812. params.wpa_ie_len = wpa_s->sme.ft_ies_len;
  813. }
  814. #endif /* CONFIG_IEEE80211R */
  815. params.mode = mode;
  816. params.mgmt_frame_protection = wpa_s->sme.mfp;
  817. params.rrm_used = wpa_s->rrm.rrm_used;
  818. if (wpa_s->sme.prev_bssid_set)
  819. params.prev_bssid = wpa_s->sme.prev_bssid;
  820. wpa_msg(wpa_s, MSG_INFO, "Trying to associate with " MACSTR
  821. " (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
  822. params.ssid ? wpa_ssid_txt(params.ssid, params.ssid_len) : "",
  823. params.freq.freq);
  824. wpa_supplicant_set_state(wpa_s, WPA_ASSOCIATING);
  825. if (params.wpa_ie == NULL ||
  826. ieee802_11_parse_elems(params.wpa_ie, params.wpa_ie_len, &elems, 0)
  827. < 0) {
  828. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Could not parse own IEs?!");
  829. os_memset(&elems, 0, sizeof(elems));
  830. }
  831. if (elems.rsn_ie) {
  832. params.wpa_proto = WPA_PROTO_RSN;
  833. wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.rsn_ie - 2,
  834. elems.rsn_ie_len + 2);
  835. } else if (elems.wpa_ie) {
  836. params.wpa_proto = WPA_PROTO_WPA;
  837. wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.wpa_ie - 2,
  838. elems.wpa_ie_len + 2);
  839. } else if (elems.osen) {
  840. params.wpa_proto = WPA_PROTO_OSEN;
  841. wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.osen - 2,
  842. elems.osen_len + 2);
  843. } else
  844. wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
  845. if (wpa_s->current_ssid && wpa_s->current_ssid->p2p_group)
  846. params.p2p = 1;
  847. if (wpa_s->parent->set_sta_uapsd)
  848. params.uapsd = wpa_s->parent->sta_uapsd;
  849. else
  850. params.uapsd = -1;
  851. if (wpa_drv_associate(wpa_s, &params) < 0) {
  852. wpa_msg(wpa_s, MSG_INFO, "SME: Association request to the "
  853. "driver failed");
  854. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  855. wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
  856. os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
  857. return;
  858. }
  859. eloop_register_timeout(SME_ASSOC_TIMEOUT, 0, sme_assoc_timer, wpa_s,
  860. NULL);
  861. }
  862. int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
  863. const u8 *ies, size_t ies_len)
  864. {
  865. if (md == NULL || ies == NULL) {
  866. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Remove mobility domain");
  867. os_free(wpa_s->sme.ft_ies);
  868. wpa_s->sme.ft_ies = NULL;
  869. wpa_s->sme.ft_ies_len = 0;
  870. wpa_s->sme.ft_used = 0;
  871. return 0;
  872. }
  873. os_memcpy(wpa_s->sme.mobility_domain, md, MOBILITY_DOMAIN_ID_LEN);
  874. wpa_hexdump(MSG_DEBUG, "SME: FT IEs", ies, ies_len);
  875. os_free(wpa_s->sme.ft_ies);
  876. wpa_s->sme.ft_ies = os_malloc(ies_len);
  877. if (wpa_s->sme.ft_ies == NULL)
  878. return -1;
  879. os_memcpy(wpa_s->sme.ft_ies, ies, ies_len);
  880. wpa_s->sme.ft_ies_len = ies_len;
  881. return 0;
  882. }
  883. static void sme_deauth(struct wpa_supplicant *wpa_s)
  884. {
  885. int bssid_changed;
  886. bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
  887. if (wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
  888. WLAN_REASON_DEAUTH_LEAVING) < 0) {
  889. wpa_msg(wpa_s, MSG_INFO, "SME: Deauth request to the driver "
  890. "failed");
  891. }
  892. wpa_s->sme.prev_bssid_set = 0;
  893. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  894. wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
  895. os_memset(wpa_s->bssid, 0, ETH_ALEN);
  896. os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
  897. if (bssid_changed)
  898. wpas_notify_bssid_changed(wpa_s);
  899. }
  900. void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
  901. union wpa_event_data *data)
  902. {
  903. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
  904. "status code %d", MAC2STR(wpa_s->pending_bssid),
  905. data->assoc_reject.status_code);
  906. eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
  907. #ifdef CONFIG_SAE
  908. if (wpa_s->sme.sae_pmksa_caching && wpa_s->current_ssid &&
  909. wpa_key_mgmt_sae(wpa_s->current_ssid->key_mgmt)) {
  910. wpa_dbg(wpa_s, MSG_DEBUG,
  911. "PMKSA caching attempt rejected - drop PMKSA cache entry and fall back to SAE authentication");
  912. wpa_sm_aborted_cached(wpa_s->wpa);
  913. wpa_sm_pmksa_cache_flush(wpa_s->wpa, wpa_s->current_ssid);
  914. if (wpa_s->current_bss) {
  915. struct wpa_bss *bss = wpa_s->current_bss;
  916. struct wpa_ssid *ssid = wpa_s->current_ssid;
  917. wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
  918. WLAN_REASON_DEAUTH_LEAVING);
  919. wpas_connect_work_done(wpa_s);
  920. wpa_supplicant_mark_disassoc(wpa_s);
  921. wpa_supplicant_connect(wpa_s, bss, ssid);
  922. return;
  923. }
  924. }
  925. #endif /* CONFIG_SAE */
  926. /*
  927. * For now, unconditionally terminate the previous authentication. In
  928. * theory, this should not be needed, but mac80211 gets quite confused
  929. * if the authentication is left pending.. Some roaming cases might
  930. * benefit from using the previous authentication, so this could be
  931. * optimized in the future.
  932. */
  933. sme_deauth(wpa_s);
  934. }
  935. void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
  936. union wpa_event_data *data)
  937. {
  938. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication timed out");
  939. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  940. wpa_supplicant_mark_disassoc(wpa_s);
  941. }
  942. void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
  943. union wpa_event_data *data)
  944. {
  945. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association timed out");
  946. wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
  947. wpa_supplicant_mark_disassoc(wpa_s);
  948. }
  949. void sme_event_disassoc(struct wpa_supplicant *wpa_s,
  950. struct disassoc_info *info)
  951. {
  952. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Disassociation event received");
  953. if (wpa_s->sme.prev_bssid_set) {
  954. /*
  955. * cfg80211/mac80211 can get into somewhat confused state if
  956. * the AP only disassociates us and leaves us in authenticated
  957. * state. For now, force the state to be cleared to avoid
  958. * confusing errors if we try to associate with the AP again.
  959. */
  960. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Deauthenticate to clear "
  961. "driver state");
  962. wpa_drv_deauthenticate(wpa_s, wpa_s->sme.prev_bssid,
  963. WLAN_REASON_DEAUTH_LEAVING);
  964. }
  965. }
  966. static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx)
  967. {
  968. struct wpa_supplicant *wpa_s = eloop_ctx;
  969. if (wpa_s->wpa_state == WPA_AUTHENTICATING) {
  970. wpa_msg(wpa_s, MSG_DEBUG, "SME: Authentication timeout");
  971. sme_deauth(wpa_s);
  972. }
  973. }
  974. static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx)
  975. {
  976. struct wpa_supplicant *wpa_s = eloop_ctx;
  977. if (wpa_s->wpa_state == WPA_ASSOCIATING) {
  978. wpa_msg(wpa_s, MSG_DEBUG, "SME: Association timeout");
  979. sme_deauth(wpa_s);
  980. }
  981. }
  982. void sme_state_changed(struct wpa_supplicant *wpa_s)
  983. {
  984. /* Make sure timers are cleaned up appropriately. */
  985. if (wpa_s->wpa_state != WPA_ASSOCIATING)
  986. eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
  987. if (wpa_s->wpa_state != WPA_AUTHENTICATING)
  988. eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
  989. }
  990. void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
  991. const u8 *prev_pending_bssid)
  992. {
  993. /*
  994. * mac80211-workaround to force deauth on failed auth cmd,
  995. * requires us to remain in authenticating state to allow the
  996. * second authentication attempt to be continued properly.
  997. */
  998. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
  999. "to proceed after disconnection event");
  1000. wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
  1001. os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);
  1002. /*
  1003. * Re-arm authentication timer in case auth fails for whatever reason.
  1004. */
  1005. eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
  1006. eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
  1007. NULL);
  1008. }
  1009. void sme_clear_on_disassoc(struct wpa_supplicant *wpa_s)
  1010. {
  1011. wpa_s->sme.prev_bssid_set = 0;
  1012. #ifdef CONFIG_SAE
  1013. wpabuf_free(wpa_s->sme.sae_token);
  1014. wpa_s->sme.sae_token = NULL;
  1015. sae_clear_data(&wpa_s->sme.sae);
  1016. #endif /* CONFIG_SAE */
  1017. #ifdef CONFIG_IEEE80211R
  1018. if (wpa_s->sme.ft_ies)
  1019. sme_update_ft_ies(wpa_s, NULL, NULL, 0);
  1020. #endif /* CONFIG_IEEE80211R */
  1021. }
  1022. void sme_deinit(struct wpa_supplicant *wpa_s)
  1023. {
  1024. os_free(wpa_s->sme.ft_ies);
  1025. wpa_s->sme.ft_ies = NULL;
  1026. wpa_s->sme.ft_ies_len = 0;
  1027. #ifdef CONFIG_IEEE80211W
  1028. sme_stop_sa_query(wpa_s);
  1029. #endif /* CONFIG_IEEE80211W */
  1030. sme_clear_on_disassoc(wpa_s);
  1031. eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
  1032. eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
  1033. eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
  1034. }
  1035. static void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
  1036. const u8 *chan_list, u8 num_channels,
  1037. u8 num_intol)
  1038. {
  1039. struct ieee80211_2040_bss_coex_ie *bc_ie;
  1040. struct ieee80211_2040_intol_chan_report *ic_report;
  1041. struct wpabuf *buf;
  1042. wpa_printf(MSG_DEBUG, "SME: Send 20/40 BSS Coexistence to " MACSTR
  1043. " (num_channels=%u num_intol=%u)",
  1044. MAC2STR(wpa_s->bssid), num_channels, num_intol);
  1045. wpa_hexdump(MSG_DEBUG, "SME: 20/40 BSS Intolerant Channels",
  1046. chan_list, num_channels);
  1047. buf = wpabuf_alloc(2 + /* action.category + action_code */
  1048. sizeof(struct ieee80211_2040_bss_coex_ie) +
  1049. sizeof(struct ieee80211_2040_intol_chan_report) +
  1050. num_channels);
  1051. if (buf == NULL)
  1052. return;
  1053. wpabuf_put_u8(buf, WLAN_ACTION_PUBLIC);
  1054. wpabuf_put_u8(buf, WLAN_PA_20_40_BSS_COEX);
  1055. bc_ie = wpabuf_put(buf, sizeof(*bc_ie));
  1056. bc_ie->element_id = WLAN_EID_20_40_BSS_COEXISTENCE;
  1057. bc_ie->length = 1;
  1058. if (num_intol)
  1059. bc_ie->coex_param |= WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ;
  1060. if (num_channels > 0) {
  1061. ic_report = wpabuf_put(buf, sizeof(*ic_report));
  1062. ic_report->element_id = WLAN_EID_20_40_BSS_INTOLERANT;
  1063. ic_report->length = num_channels + 1;
  1064. ic_report->op_class = 0;
  1065. os_memcpy(wpabuf_put(buf, num_channels), chan_list,
  1066. num_channels);
  1067. }
  1068. if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
  1069. wpa_s->own_addr, wpa_s->bssid,
  1070. wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
  1071. wpa_msg(wpa_s, MSG_INFO,
  1072. "SME: Failed to send 20/40 BSS Coexistence frame");
  1073. }
  1074. wpabuf_free(buf);
  1075. }
  1076. int sme_proc_obss_scan(struct wpa_supplicant *wpa_s)
  1077. {
  1078. struct wpa_bss *bss;
  1079. const u8 *ie;
  1080. u16 ht_cap;
  1081. u8 chan_list[P2P_MAX_CHANNELS], channel;
  1082. u8 num_channels = 0, num_intol = 0, i;
  1083. if (!wpa_s->sme.sched_obss_scan)
  1084. return 0;
  1085. wpa_s->sme.sched_obss_scan = 0;
  1086. if (!wpa_s->current_bss || wpa_s->wpa_state != WPA_COMPLETED)
  1087. return 1;
  1088. /*
  1089. * Check whether AP uses regulatory triplet or channel triplet in
  1090. * country info. Right now the operating class of the BSS channel
  1091. * width trigger event is "unknown" (IEEE Std 802.11-2012 10.15.12),
  1092. * based on the assumption that operating class triplet is not used in
  1093. * beacon frame. If the First Channel Number/Operating Extension
  1094. * Identifier octet has a positive integer value of 201 or greater,
  1095. * then its operating class triplet.
  1096. *
  1097. * TODO: If Supported Operating Classes element is present in beacon
  1098. * frame, have to lookup operating class in Annex E and fill them in
  1099. * 2040 coex frame.
  1100. */
  1101. ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_COUNTRY);
  1102. if (ie && (ie[1] >= 6) && (ie[5] >= 201))
  1103. return 1;
  1104. os_memset(chan_list, 0, sizeof(chan_list));
  1105. dl_list_for_each(bss, &wpa_s->bss, struct wpa_bss, list) {
  1106. /* Skip other band bss */
  1107. enum hostapd_hw_mode mode;
  1108. mode = ieee80211_freq_to_chan(bss->freq, &channel);
  1109. if (mode != HOSTAPD_MODE_IEEE80211G &&
  1110. mode != HOSTAPD_MODE_IEEE80211B)
  1111. continue;
  1112. ie = wpa_bss_get_ie(bss, WLAN_EID_HT_CAP);
  1113. ht_cap = (ie && (ie[1] == 26)) ? WPA_GET_LE16(ie + 2) : 0;
  1114. wpa_printf(MSG_DEBUG, "SME OBSS scan BSS " MACSTR
  1115. " freq=%u chan=%u ht_cap=0x%x",
  1116. MAC2STR(bss->bssid), bss->freq, channel, ht_cap);
  1117. if (!ht_cap || (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)) {
  1118. if (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)
  1119. num_intol++;
  1120. /* Check whether the channel is already considered */
  1121. for (i = 0; i < num_channels; i++) {
  1122. if (channel == chan_list[i])
  1123. break;
  1124. }
  1125. if (i != num_channels)
  1126. continue;
  1127. chan_list[num_channels++] = channel;
  1128. }
  1129. }
  1130. sme_send_2040_bss_coex(wpa_s, chan_list, num_channels, num_intol);
  1131. return 1;
  1132. }
  1133. static struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
  1134. u16 num_modes,
  1135. enum hostapd_hw_mode mode)
  1136. {
  1137. u16 i;
  1138. for (i = 0; i < num_modes; i++) {
  1139. if (modes[i].mode == mode)
  1140. return &modes[i];
  1141. }
  1142. return NULL;
  1143. }
  1144. static void wpa_obss_scan_freqs_list(struct wpa_supplicant *wpa_s,
  1145. struct wpa_driver_scan_params *params)
  1146. {
  1147. /* Include only affected channels */
  1148. struct hostapd_hw_modes *mode;
  1149. int count, i;
  1150. int start, end;
  1151. mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes,
  1152. HOSTAPD_MODE_IEEE80211G);
  1153. if (mode == NULL) {
  1154. /* No channels supported in this band - use empty list */
  1155. params->freqs = os_zalloc(sizeof(int));
  1156. return;
  1157. }
  1158. if (wpa_s->sme.ht_sec_chan == HT_SEC_CHAN_UNKNOWN &&
  1159. wpa_s->current_bss) {
  1160. const u8 *ie;
  1161. ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_OPERATION);
  1162. if (ie && ie[1] >= 2) {
  1163. u8 o;
  1164. o = ie[3] & HT_INFO_HT_PARAM_SECONDARY_CHNL_OFF_MASK;
  1165. if (o == HT_INFO_HT_PARAM_SECONDARY_CHNL_ABOVE)
  1166. wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_ABOVE;
  1167. else if (o == HT_INFO_HT_PARAM_SECONDARY_CHNL_BELOW)
  1168. wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_BELOW;
  1169. }
  1170. }
  1171. start = wpa_s->assoc_freq - 10;
  1172. end = wpa_s->assoc_freq + 10;
  1173. switch (wpa_s->sme.ht_sec_chan) {
  1174. case HT_SEC_CHAN_UNKNOWN:
  1175. /* HT40+ possible on channels 1..9 */
  1176. if (wpa_s->assoc_freq <= 2452)
  1177. start -= 20;
  1178. /* HT40- possible on channels 5-13 */
  1179. if (wpa_s->assoc_freq >= 2432)
  1180. end += 20;
  1181. break;
  1182. case HT_SEC_CHAN_ABOVE:
  1183. end += 20;
  1184. break;
  1185. case HT_SEC_CHAN_BELOW:
  1186. start -= 20;
  1187. break;
  1188. }
  1189. wpa_printf(MSG_DEBUG,
  1190. "OBSS: assoc_freq %d possible affected range %d-%d",
  1191. wpa_s->assoc_freq, start, end);
  1192. params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
  1193. if (params->freqs == NULL)
  1194. return;
  1195. for (count = 0, i = 0; i < mode->num_channels; i++) {
  1196. int freq;
  1197. if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
  1198. continue;
  1199. freq = mode->channels[i].freq;
  1200. if (freq - 10 >= end || freq + 10 <= start)
  1201. continue; /* not affected */
  1202. params->freqs[count++] = freq;
  1203. }
  1204. }
  1205. static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx)
  1206. {
  1207. struct wpa_supplicant *wpa_s = eloop_ctx;
  1208. struct wpa_driver_scan_params params;
  1209. if (!wpa_s->current_bss) {
  1210. wpa_printf(MSG_DEBUG, "SME OBSS: Ignore scan request");
  1211. return;
  1212. }
  1213. os_memset(&params, 0, sizeof(params));
  1214. wpa_obss_scan_freqs_list(wpa_s, &params);
  1215. params.low_priority = 1;
  1216. wpa_printf(MSG_DEBUG, "SME OBSS: Request an OBSS scan");
  1217. if (wpa_supplicant_trigger_scan(wpa_s, &params))
  1218. wpa_printf(MSG_DEBUG, "SME OBSS: Failed to trigger scan");
  1219. else
  1220. wpa_s->sme.sched_obss_scan = 1;
  1221. os_free(params.freqs);
  1222. eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
  1223. sme_obss_scan_timeout, wpa_s, NULL);
  1224. }
  1225. void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
  1226. {
  1227. const u8 *ie;
  1228. struct wpa_bss *bss = wpa_s->current_bss;
  1229. struct wpa_ssid *ssid = wpa_s->current_ssid;
  1230. struct hostapd_hw_modes *hw_mode = NULL;
  1231. int i;
  1232. eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
  1233. wpa_s->sme.sched_obss_scan = 0;
  1234. wpa_s->sme.ht_sec_chan = HT_SEC_CHAN_UNKNOWN;
  1235. if (!enable)
  1236. return;
  1237. /*
  1238. * Schedule OBSS scan if driver is using station SME in wpa_supplicant
  1239. * or it expects OBSS scan to be performed by wpa_supplicant.
  1240. */
  1241. if (!((wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) ||
  1242. (wpa_s->drv_flags & WPA_DRIVER_FLAGS_OBSS_SCAN)) ||
  1243. ssid == NULL || ssid->mode != IEEE80211_MODE_INFRA)
  1244. return;
  1245. if (!wpa_s->hw.modes)
  1246. return;
  1247. /* only HT caps in 11g mode are relevant */
  1248. for (i = 0; i < wpa_s->hw.num_modes; i++) {
  1249. hw_mode = &wpa_s->hw.modes[i];
  1250. if (hw_mode->mode == HOSTAPD_MODE_IEEE80211G)
  1251. break;
  1252. }
  1253. /* Driver does not support HT40 for 11g or doesn't have 11g. */
  1254. if (i == wpa_s->hw.num_modes || !hw_mode ||
  1255. !(hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
  1256. return;
  1257. if (bss == NULL || bss->freq < 2400 || bss->freq > 2500)
  1258. return; /* Not associated on 2.4 GHz band */
  1259. /* Check whether AP supports HT40 */
  1260. ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_CAP);
  1261. if (!ie || ie[1] < 2 ||
  1262. !(WPA_GET_LE16(ie + 2) & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
  1263. return; /* AP does not support HT40 */
  1264. ie = wpa_bss_get_ie(wpa_s->current_bss,
  1265. WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS);
  1266. if (!ie || ie[1] < 14)
  1267. return; /* AP does not request OBSS scans */
  1268. wpa_s->sme.obss_scan_int = WPA_GET_LE16(ie + 6);
  1269. if (wpa_s->sme.obss_scan_int < 10) {
  1270. wpa_printf(MSG_DEBUG, "SME: Invalid OBSS Scan Interval %u "
  1271. "replaced with the minimum 10 sec",
  1272. wpa_s->sme.obss_scan_int);
  1273. wpa_s->sme.obss_scan_int = 10;
  1274. }
  1275. wpa_printf(MSG_DEBUG, "SME: OBSS Scan Interval %u sec",
  1276. wpa_s->sme.obss_scan_int);
  1277. eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
  1278. sme_obss_scan_timeout, wpa_s, NULL);
  1279. }
  1280. #ifdef CONFIG_IEEE80211W
  1281. static const unsigned int sa_query_max_timeout = 1000;
  1282. static const unsigned int sa_query_retry_timeout = 201;
  1283. static int sme_check_sa_query_timeout(struct wpa_supplicant *wpa_s)
  1284. {
  1285. u32 tu;
  1286. struct os_reltime now, passed;
  1287. os_get_reltime(&now);
  1288. os_reltime_sub(&now, &wpa_s->sme.sa_query_start, &passed);
  1289. tu = (passed.sec * 1000000 + passed.usec) / 1024;
  1290. if (sa_query_max_timeout < tu) {
  1291. wpa_dbg(wpa_s, MSG_DEBUG, "SME: SA Query timed out");
  1292. sme_stop_sa_query(wpa_s);
  1293. wpa_supplicant_deauthenticate(
  1294. wpa_s, WLAN_REASON_PREV_AUTH_NOT_VALID);
  1295. return 1;
  1296. }
  1297. return 0;
  1298. }
  1299. static void sme_send_sa_query_req(struct wpa_supplicant *wpa_s,
  1300. const u8 *trans_id)
  1301. {
  1302. u8 req[2 + WLAN_SA_QUERY_TR_ID_LEN];
  1303. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Sending SA Query Request to "
  1304. MACSTR, MAC2STR(wpa_s->bssid));
  1305. wpa_hexdump(MSG_DEBUG, "SME: SA Query Transaction ID",
  1306. trans_id, WLAN_SA_QUERY_TR_ID_LEN);
  1307. req[0] = WLAN_ACTION_SA_QUERY;
  1308. req[1] = WLAN_SA_QUERY_REQUEST;
  1309. os_memcpy(req + 2, trans_id, WLAN_SA_QUERY_TR_ID_LEN);
  1310. if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
  1311. wpa_s->own_addr, wpa_s->bssid,
  1312. req, sizeof(req), 0) < 0)
  1313. wpa_msg(wpa_s, MSG_INFO, "SME: Failed to send SA Query "
  1314. "Request");
  1315. }
  1316. static void sme_sa_query_timer(void *eloop_ctx, void *timeout_ctx)
  1317. {
  1318. struct wpa_supplicant *wpa_s = eloop_ctx;
  1319. unsigned int timeout, sec, usec;
  1320. u8 *trans_id, *nbuf;
  1321. if (wpa_s->sme.sa_query_count > 0 &&
  1322. sme_check_sa_query_timeout(wpa_s))
  1323. return;
  1324. nbuf = os_realloc_array(wpa_s->sme.sa_query_trans_id,
  1325. wpa_s->sme.sa_query_count + 1,
  1326. WLAN_SA_QUERY_TR_ID_LEN);
  1327. if (nbuf == NULL)
  1328. return;
  1329. if (wpa_s->sme.sa_query_count == 0) {
  1330. /* Starting a new SA Query procedure */
  1331. os_get_reltime(&wpa_s->sme.sa_query_start);
  1332. }
  1333. trans_id = nbuf + wpa_s->sme.sa_query_count * WLAN_SA_QUERY_TR_ID_LEN;
  1334. wpa_s->sme.sa_query_trans_id = nbuf;
  1335. wpa_s->sme.sa_query_count++;
  1336. if (os_get_random(trans_id, WLAN_SA_QUERY_TR_ID_LEN) < 0) {
  1337. wpa_printf(MSG_DEBUG, "Could not generate SA Query ID");
  1338. return;
  1339. }
  1340. timeout = sa_query_retry_timeout;
  1341. sec = ((timeout / 1000) * 1024) / 1000;
  1342. usec = (timeout % 1000) * 1024;
  1343. eloop_register_timeout(sec, usec, sme_sa_query_timer, wpa_s, NULL);
  1344. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association SA Query attempt %d",
  1345. wpa_s->sme.sa_query_count);
  1346. sme_send_sa_query_req(wpa_s, trans_id);
  1347. }
  1348. static void sme_start_sa_query(struct wpa_supplicant *wpa_s)
  1349. {
  1350. sme_sa_query_timer(wpa_s, NULL);
  1351. }
  1352. static void sme_stop_sa_query(struct wpa_supplicant *wpa_s)
  1353. {
  1354. eloop_cancel_timeout(sme_sa_query_timer, wpa_s, NULL);
  1355. os_free(wpa_s->sme.sa_query_trans_id);
  1356. wpa_s->sme.sa_query_trans_id = NULL;
  1357. wpa_s->sme.sa_query_count = 0;
  1358. }
  1359. void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
  1360. const u8 *da, u16 reason_code)
  1361. {
  1362. struct wpa_ssid *ssid;
  1363. struct os_reltime now;
  1364. if (wpa_s->wpa_state != WPA_COMPLETED)
  1365. return;
  1366. ssid = wpa_s->current_ssid;
  1367. if (wpas_get_ssid_pmf(wpa_s, ssid) == NO_MGMT_FRAME_PROTECTION)
  1368. return;
  1369. if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
  1370. return;
  1371. if (reason_code != WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA &&
  1372. reason_code != WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA)
  1373. return;
  1374. if (wpa_s->sme.sa_query_count > 0)
  1375. return;
  1376. os_get_reltime(&now);
  1377. if (wpa_s->sme.last_unprot_disconnect.sec &&
  1378. !os_reltime_expired(&now, &wpa_s->sme.last_unprot_disconnect, 10))
  1379. return; /* limit SA Query procedure frequency */
  1380. wpa_s->sme.last_unprot_disconnect = now;
  1381. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Unprotected disconnect dropped - "
  1382. "possible AP/STA state mismatch - trigger SA Query");
  1383. sme_start_sa_query(wpa_s);
  1384. }
  1385. void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *sa,
  1386. const u8 *data, size_t len)
  1387. {
  1388. int i;
  1389. if (wpa_s->sme.sa_query_trans_id == NULL ||
  1390. len < 1 + WLAN_SA_QUERY_TR_ID_LEN ||
  1391. data[0] != WLAN_SA_QUERY_RESPONSE)
  1392. return;
  1393. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Received SA Query response from "
  1394. MACSTR " (trans_id %02x%02x)", MAC2STR(sa), data[1], data[2]);
  1395. if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
  1396. return;
  1397. for (i = 0; i < wpa_s->sme.sa_query_count; i++) {
  1398. if (os_memcmp(wpa_s->sme.sa_query_trans_id +
  1399. i * WLAN_SA_QUERY_TR_ID_LEN,
  1400. data + 1, WLAN_SA_QUERY_TR_ID_LEN) == 0)
  1401. break;
  1402. }
  1403. if (i >= wpa_s->sme.sa_query_count) {
  1404. wpa_dbg(wpa_s, MSG_DEBUG, "SME: No matching SA Query "
  1405. "transaction identifier found");
  1406. return;
  1407. }
  1408. wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reply to pending SA Query received "
  1409. "from " MACSTR, MAC2STR(sa));
  1410. sme_stop_sa_query(wpa_s);
  1411. }
  1412. #endif /* CONFIG_IEEE80211W */