openwrt-archive/package/kernel/mac80211/patches/351-0007-brcmutil-add-field-storing-control-channel-to-the-st.patch

From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Fri, 20 May 2016 13:38:57 +0200
Subject: [PATCH] brcmutil: add field storing control channel to the struct
 brcmu_chan
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Our d11 code supports encoding/decoding channel info into/from chanspec
format used by firmware. Current implementation is quite misleading
because of the way "chnum" field is used.
When encoding channel info, "chnum" has to be filled by a caller with
*center* channel number. However when decoding chanspec the same field
is filled with a *control* channel number.

1) This can be confusing. It's expected for information to be the same
   after encoding and decoding.
2) It doesn't allow accessing all info when decoding. Some functions may
   need to know both channel numbers, e.g. cfg80211 callback getting
   current channel.
Solve this by adding a separated field for control channel.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2765,7 +2765,7 @@ static s32 brcmf_inform_single_bss(struc
 	if (!bi->ctl_ch) {
 		ch.chspec = le16_to_cpu(bi->chanspec);
 		cfg->d11inf.decchspec(&ch);
-		bi->ctl_ch = ch.chnum;
+		bi->ctl_ch = ch.control_ch_num;
 	}
 	channel = bi->ctl_ch;
 
@@ -2883,7 +2883,7 @@ static s32 brcmf_inform_ibss(struct brcm
 	else
 		band = wiphy->bands[NL80211_BAND_5GHZ];
 
-	freq = ieee80211_channel_to_frequency(ch.chnum, band->band);
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
 	cfg->channel = freq;
 	notify_channel = ieee80211_get_channel(wiphy, freq);
 
@@ -2893,7 +2893,7 @@ static s32 brcmf_inform_ibss(struct brcm
 	notify_ielen = le32_to_cpu(bi->ie_length);
 	notify_signal = (s16)le16_to_cpu(bi->RSSI) * 100;
 
-	brcmf_dbg(CONN, "channel: %d(%d)\n", ch.chnum, freq);
+	brcmf_dbg(CONN, "channel: %d(%d)\n", ch.control_ch_num, freq);
 	brcmf_dbg(CONN, "capability: %X\n", notify_capability);
 	brcmf_dbg(CONN, "beacon interval: %d\n", notify_interval);
 	brcmf_dbg(CONN, "signal: %d\n", notify_signal);
@@ -5311,7 +5311,7 @@ brcmf_bss_roaming_done(struct brcmf_cfg8
 	else
 		band = wiphy->bands[NL80211_BAND_5GHZ];
 
-	freq = ieee80211_channel_to_frequency(ch.chnum, band->band);
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num, band->band);
 	notify_channel = ieee80211_get_channel(wiphy, freq);
 
 done:
@@ -5833,14 +5833,15 @@ static int brcmf_construct_chaninfo(stru
 		channel = band->channels;
 		index = band->n_channels;
 		for (j = 0; j < band->n_channels; j++) {
-			if (channel[j].hw_value == ch.chnum) {
+			if (channel[j].hw_value == ch.control_ch_num) {
 				index = j;
 				break;
 			}
 		}
 		channel[index].center_freq =
-			ieee80211_channel_to_frequency(ch.chnum, band->band);
-		channel[index].hw_value = ch.chnum;
+			ieee80211_channel_to_frequency(ch.control_ch_num,
+						       band->band);
+		channel[index].hw_value = ch.control_ch_num;
 
 		/* assuming the chanspecs order is HT20,
 		 * HT40 upper, HT40 lower, and VHT80.
@@ -5942,7 +5943,7 @@ static int brcmf_enable_bw40_2g(struct b
 			if (WARN_ON(ch.bw != BRCMU_CHAN_BW_40))
 				continue;
 			for (j = 0; j < band->n_channels; j++) {
-				if (band->channels[j].hw_value == ch.chnum)
+				if (band->channels[j].hw_value == ch.control_ch_num)
 					break;
 			}
 			if (WARN_ON(j == band->n_channels))
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -1246,7 +1246,7 @@ bool brcmf_p2p_scan_finding_common_chann
 		if (!bi->ctl_ch) {
 			ch.chspec = le16_to_cpu(bi->chanspec);
 			cfg->d11inf.decchspec(&ch);
-			bi->ctl_ch = ch.chnum;
+			bi->ctl_ch = ch.control_ch_num;
 		}
 		afx_hdl->peer_chan = bi->ctl_ch;
 		brcmf_dbg(TRACE, "ACTION FRAME SCAN : Peer %pM found, channel : %d\n",
@@ -1385,7 +1385,7 @@ int brcmf_p2p_notify_action_frame_rx(str
 			if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL,
 				     &p2p->status) &&
 			    (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
-				afx_hdl->peer_chan = ch.chnum;
+				afx_hdl->peer_chan = ch.control_ch_num;
 				brcmf_dbg(INFO, "GON request: Peer found, channel=%d\n",
 					  afx_hdl->peer_chan);
 				complete(&afx_hdl->act_frm_scan);
@@ -1428,7 +1428,7 @@ int brcmf_p2p_notify_action_frame_rx(str
 	memcpy(&mgmt_frame->u, frame, mgmt_frame_len);
 	mgmt_frame_len += offsetof(struct ieee80211_mgmt, u);
 
-	freq = ieee80211_channel_to_frequency(ch.chnum,
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num,
 					      ch.band == BRCMU_CHAN_BAND_2G ?
 					      NL80211_BAND_2GHZ :
 					      NL80211_BAND_5GHZ);
@@ -1873,7 +1873,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
 
 	if (test_bit(BRCMF_P2P_STATUS_FINDING_COMMON_CHANNEL, &p2p->status) &&
 	    (ether_addr_equal(afx_hdl->tx_dst_addr, e->addr))) {
-		afx_hdl->peer_chan = ch.chnum;
+		afx_hdl->peer_chan = ch.control_ch_num;
 		brcmf_dbg(INFO, "PROBE REQUEST: Peer found, channel=%d\n",
 			  afx_hdl->peer_chan);
 		complete(&afx_hdl->act_frm_scan);
@@ -1898,7 +1898,7 @@ s32 brcmf_p2p_notify_rx_mgmt_p2p_probere
 
 	mgmt_frame = (u8 *)(rxframe + 1);
 	mgmt_frame_len = e->datalen - sizeof(*rxframe);
-	freq = ieee80211_channel_to_frequency(ch.chnum,
+	freq = ieee80211_channel_to_frequency(ch.control_ch_num,
 					      ch.band == BRCMU_CHAN_BAND_2G ?
 					      NL80211_BAND_2GHZ :
 					      NL80211_BAND_5GHZ);
--- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
@@ -107,6 +107,7 @@ static void brcmu_d11n_decchspec(struct
 	u16 val;
 
 	ch->chnum = (u8)(ch->chspec & BRCMU_CHSPEC_CH_MASK);
+	ch->control_ch_num = ch->chnum;
 
 	switch (ch->chspec & BRCMU_CHSPEC_D11N_BW_MASK) {
 	case BRCMU_CHSPEC_D11N_BW_20:
@@ -118,10 +119,10 @@ static void brcmu_d11n_decchspec(struct
 		val = ch->chspec & BRCMU_CHSPEC_D11N_SB_MASK;
 		if (val == BRCMU_CHSPEC_D11N_SB_L) {
 			ch->sb = BRCMU_CHAN_SB_L;
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 		} else {
 			ch->sb = BRCMU_CHAN_SB_U;
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 		}
 		break;
 	default:
@@ -147,6 +148,7 @@ static void brcmu_d11ac_decchspec(struct
 	u16 val;
 
 	ch->chnum = (u8)(ch->chspec & BRCMU_CHSPEC_CH_MASK);
+	ch->control_ch_num = ch->chnum;
 
 	switch (ch->chspec & BRCMU_CHSPEC_D11AC_BW_MASK) {
 	case BRCMU_CHSPEC_D11AC_BW_20:
@@ -158,10 +160,10 @@ static void brcmu_d11ac_decchspec(struct
 		val = ch->chspec & BRCMU_CHSPEC_D11AC_SB_MASK;
 		if (val == BRCMU_CHSPEC_D11AC_SB_L) {
 			ch->sb = BRCMU_CHAN_SB_L;
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 		} else if (val == BRCMU_CHSPEC_D11AC_SB_U) {
 			ch->sb = BRCMU_CHAN_SB_U;
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 		} else {
 			WARN_ON_ONCE(1);
 		}
@@ -172,16 +174,16 @@ static void brcmu_d11ac_decchspec(struct
 					 BRCMU_CHSPEC_D11AC_SB_SHIFT);
 		switch (ch->sb) {
 		case BRCMU_CHAN_SB_LL:
-			ch->chnum -= CH_30MHZ_APART;
+			ch->control_ch_num -= CH_30MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_LU:
-			ch->chnum -= CH_10MHZ_APART;
+			ch->control_ch_num -= CH_10MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_UL:
-			ch->chnum += CH_10MHZ_APART;
+			ch->control_ch_num += CH_10MHZ_APART;
 			break;
 		case BRCMU_CHAN_SB_UU:
-			ch->chnum += CH_30MHZ_APART;
+			ch->control_ch_num += CH_30MHZ_APART;
 			break;
 		default:
 			WARN_ON_ONCE(1);
--- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h
+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_d11.h
@@ -125,14 +125,36 @@ enum brcmu_chan_sb {
 	BRCMU_CHAN_SB_UU = BRCMU_CHAN_SB_LUU,
 };
 
+/**
+ * struct brcmu_chan - stores channel formats
+ *
+ * This structure can be used with functions translating chanspec into generic
+ * channel info and the other way.
+ *
+ * @chspec: firmware specific format
+ * @chnum: center channel number
+ * @control_ch_num: control channel number
+ * @band: frequency band
+ * @bw: channel width
+ * @sb: control sideband (location of control channel against the center one)
+ */
 struct brcmu_chan {
 	u16 chspec;
 	u8 chnum;
+	u8 control_ch_num;
 	u8 band;
 	enum brcmu_chan_bw bw;
 	enum brcmu_chan_sb sb;
 };
 
+/**
+ * struct brcmu_d11inf - provides functions translating channel format
+ *
+ * @io_type: determines version of channel format used by firmware
+ * @encchspec: encodes channel info into a chanspec, requires center channel
+ *	number, ignores control one
+ * @decchspec: decodes chanspec into generic info
+ */
 struct brcmu_d11inf {
 	u8 io_type;