| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869 |
- From 018d3d118011d7022f336f3b0d0db5aef5cbb31d Mon Sep 17 00:00:00 2001
- From: Eric Anholt <eric@anholt.net>
- Date: Fri, 6 May 2016 12:42:26 -0700
- Subject: [PATCH 330/381] BCM270X_DT: Set correct HDMI HPD GPIO levels for
- various boards.
- The CM is left out, because I haven't found a source for how the CM's
- HPD is connected.
- Signed-off-by: Eric Anholt <eric@anholt.net>
- ---
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 4 ++++
- arch/arm/boot/dts/bcm2708-rpi-b.dts | 4 ++++
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 4 ++++
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 4 ++++
- 4 files changed, 16 insertions(+)
- --- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
- +++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
- @@ -116,6 +116,10 @@
- };
- };
-
- +&hdmi {
- + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- +};
- +
- / {
- __overrides__ {
- uart0 = <&uart0>,"status";
- --- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
- +++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
- @@ -110,6 +110,10 @@
- };
- };
-
- +&hdmi {
- + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
- +};
- +
- / {
- __overrides__ {
- uart0 = <&uart0>,"status";
- --- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
- +++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
- @@ -116,6 +116,10 @@
- };
- };
-
- +&hdmi {
- + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- +};
- +
- / {
- __overrides__ {
- uart0 = <&uart0>,"status";
- --- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
- +++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
- @@ -161,6 +161,10 @@
- };
- };
-
- +&hdmi {
- + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
- +};
- +
- / {
- chosen {
- bootargs = "8250.nr_uarts=1";
|
