| 123456789101112131415161718192021222324252627282930313233343536373839404142434445 |
- --- a/drivers/net/phy/Kconfig
- +++ b/drivers/net/phy/Kconfig
- @@ -251,6 +251,30 @@ config MDIO_BCM_UNIMAC
- controllers as well as some Broadcom Ethernet switches such as the
- Starfighter 2 switches.
-
- +config RTL8366_SMI
- + tristate "Driver for the RTL8366 SMI interface"
- + depends on GPIOLIB
- + ---help---
- + This module implements the SMI interface protocol which is used
- + by some RTL8366 ethernet switch devices via the generic GPIO API.
- +
- +if RTL8366_SMI
- +
- +config RTL8366_SMI_DEBUG_FS
- + bool "RTL8366 SMI interface debugfs support"
- + depends on DEBUG_FS
- + default n
- +
- +config RTL8366S_PHY
- + tristate "Driver for the Realtek RTL8366S switch"
- + select SWCONFIG
- +
- +config RTL8366RB_PHY
- + tristate "Driver for the Realtek RTL8366RB switch"
- + select SWCONFIG
- +
- +endif # RTL8366_SMI
- +
- endif # PHYLIB
-
- config MICREL_KS8995MA
- --- a/drivers/net/phy/Makefile
- +++ b/drivers/net/phy/Makefile
- @@ -24,6 +24,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
- obj-$(CONFIG_REALTEK_PHY) += realtek.o
- obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
- obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
- +obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
- +obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
- +obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
- obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
- obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
