| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051 |
- #AP6181_NVRAM_V1.1_01152013
- #adjuest PA parameter for g/n mode
- manfid=0x2d0
- prodid=0x492
- vendid=0x14e4
- devid=0x4343
- boardtype=0x0598
- # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
- #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
- boardrev=0x1307
- boardnum=777
- xtalfreq=26000
- boardflags=0xa00
- sromrev=3
- wl0id=0x431b
- macaddr=00:90:4c:07:71:12
- aa2g=1
- ag0=2
- maxp2ga0=74
- cck2gpo=0x2222
- ofdm2gpo=0x66666666
- mcs2gpo0=0x7777
- mcs2gpo1=0x7777
- pa0maxpwr=56
- #P207 PA params
- #pa0b0=5447
- #pa0b1=-658
- #pa0b2=-175<div></div>
- #Same PA params for P304,P305, P306, P307
- pa0b0=5447
- pa0b1=-607
- pa0b2=-160
- pa0itssit=62
- pa1itssit=62
- cckPwrOffset=5
- ccode=0
- rssismf2g=0xa
- rssismc2g=0x3
- rssisav2g=0x7
- triso2g=0
- noise_cal_enable_2g=0
- noise_cal_po_2g=0
- swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
- temp_add=29767
- temp_mult=425
|
