wareck
/
openwrt_chaos_calmer


			
				
					
						
						
							123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301
							From 3f7be04a148d23cdb5fd320e0e2923983f8bd1f4 Mon Sep 17 00:00:00 2001
From: Luka Perkov <luka@openwrt.org>
Date: Tue, 6 Aug 2013 22:51:00 +0200
Subject: MIPS: add board support for ZyXEL P-2812HNU-Fx

Signed-off-by: Luka Perkov <luka@openwrt.org>

--- /dev/null
+++ b/board/zyxel/p2812hnufx/Makefile
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2000-2011 Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+++ b/board/zyxel/p2812hnufx/config.mk
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2012-2013 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARDDIR)
--- /dev/null
+++ b/board/zyxel/p2812hnufx/ddr_settings.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+ *
+ * The values have been extracted from original ZyXEL U-Boot.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#define	MC_CCR00_VALUE	0x101
+#define	MC_CCR01_VALUE	0x1000100
+#define	MC_CCR02_VALUE	0x1010000
+#define	MC_CCR03_VALUE	0x101
+#define	MC_CCR04_VALUE	0x1000000
+#define	MC_CCR05_VALUE	0x1000101
+#define	MC_CCR06_VALUE	0x1000100
+#define	MC_CCR07_VALUE	0x1010000
+#define	MC_CCR08_VALUE	0x1000101
+#define	MC_CCR09_VALUE	0x0
+#define	MC_CCR10_VALUE	0x2000100
+#define	MC_CCR11_VALUE	0x2000300
+#define	MC_CCR12_VALUE	0x30000
+#define	MC_CCR13_VALUE	0x202
+#define	MC_CCR14_VALUE	0x7080A0F
+#define	MC_CCR15_VALUE	0x2040F
+#define	MC_CCR16_VALUE	0x40000
+#define	MC_CCR17_VALUE	0x70102
+#define	MC_CCR18_VALUE	0x4020002
+#define	MC_CCR19_VALUE	0x30302
+#define	MC_CCR20_VALUE	0x8000700
+#define	MC_CCR21_VALUE	0x40F020A
+#define	MC_CCR22_VALUE	0x0
+#define	MC_CCR23_VALUE	0xC020000
+#define	MC_CCR24_VALUE	0x4401B04
+#define	MC_CCR25_VALUE	0x0
+#define	MC_CCR26_VALUE	0x0
+#define	MC_CCR27_VALUE	0x6420000
+#define	MC_CCR28_VALUE	0x0
+#define	MC_CCR29_VALUE	0x0
+#define	MC_CCR30_VALUE	0x798
+#define	MC_CCR31_VALUE	0x0
+#define	MC_CCR32_VALUE	0x0
+#define	MC_CCR33_VALUE	0x650000
+#define	MC_CCR34_VALUE	0x200C8
+#define	MC_CCR35_VALUE	0x1D445D
+#define	MC_CCR36_VALUE	0xC8
+#define	MC_CCR37_VALUE	0xC351
+#define	MC_CCR38_VALUE	0x0
+#define	MC_CCR39_VALUE	0x141F04
+#define	MC_CCR40_VALUE	0x142704
+#define	MC_CCR41_VALUE	0x141B42
+#define	MC_CCR42_VALUE	0x141B42
+#define	MC_CCR43_VALUE	0x566504
+#define	MC_CCR44_VALUE	0x566504
+#define	MC_CCR45_VALUE	0x565F17
+#define	MC_CCR46_VALUE	0x565F17
+#define	MC_CCR47_VALUE	0x0
+#define	MC_CCR48_VALUE	0x0
+#define	MC_CCR49_VALUE	0x0
+#define	MC_CCR50_VALUE	0x0
+#define	MC_CCR51_VALUE	0x0
+#define	MC_CCR52_VALUE	0x133
+#define	MC_CCR53_VALUE	0xF3014B27
+#define	MC_CCR54_VALUE	0xF3014B27
+#define	MC_CCR55_VALUE	0xF3014B27
+#define	MC_CCR56_VALUE	0xF3014B27
+#define	MC_CCR57_VALUE	0x7800301
+#define	MC_CCR58_VALUE	0x7800301
+#define	MC_CCR59_VALUE	0x7800301
+#define	MC_CCR60_VALUE	0x7800301
+#define	MC_CCR61_VALUE	0x4
--- /dev/null
+++ b/board/zyxel/p2812hnufx/p2812hnufx.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/lantiq/eth.h>
+#include <asm/lantiq/chipid.h>
+#include <asm/lantiq/cpu.h>
+#include <asm/arch/gphy.h>
+
+#if defined(CONFIG_SPL_BUILD)
+#define do_gpio_init	1
+#define do_pll_init	1
+#define do_dcdc_init	0
+#elif defined(CONFIG_SYS_BOOT_RAM)
+#define do_gpio_init	1
+#define do_pll_init	0
+#define do_dcdc_init	1
+#else
+#define do_gpio_init	0
+#define do_pll_init	0
+#define do_dcdc_init	1
+#endif
+
+static void gpio_init(void)
+{
+	/* EBU.FL_CS1 as output for NAND CE */
+	gpio_set_altfunc(23, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+	/* EBU.FL_A23 as output for NAND CLE */
+	gpio_set_altfunc(24, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+	/* EBU.FL_A24 as output for NAND ALE */
+	gpio_set_altfunc(13, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+	/* GPIO 3.0 as input for NAND Ready Busy */
+	gpio_set_altfunc(48, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_IN);
+	/* GPIO 3.1 as output for NAND Read */
+	gpio_set_altfunc(49, GPIO_ALTSEL_SET, GPIO_ALTSEL_CLR, GPIO_DIR_OUT);
+}
+
+int board_early_init_f(void)
+{
+	if (do_gpio_init)
+		gpio_init();
+
+	if (do_pll_init)
+		ltq_pll_init();
+
+	if (do_dcdc_init)
+		ltq_dcdc_init(0x7F);
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: " CONFIG_BOARD_NAME "\n");
+	ltq_chip_print_info();
+
+	return 0;
+}
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+	/* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
+	{ 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+	/* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
+	{ 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+	/* GMAC2: internal GPHY0 with 10/100/1000 firmware for LAN port 2 */
+	{ 2, 0x11, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
+	/* GMAC3: unused */
+	{ 3, 0x0, LTQ_ETH_PORT_NONE, PHY_INTERFACE_MODE_NONE },
+	/* GMAC4: internal GPHY1 with 10/100/1000 firmware for LAN port 3 */
+	{ 4, 0x13, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_GMII },
+	/* GMAC5: external Lantiq PEF7071 10/100/1000 PHY for WANoE port */
+	{ 5, 0x5, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+};
+
+static const struct ltq_eth_board_config eth_board_config = {
+	.ports = eth_port_config,
+	.num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+int board_eth_init(bd_t * bis)
+{
+	const enum ltq_gphy_clk clk = LTQ_GPHY_CLK_25MHZ_PLL0;
+	const ulong fw_addr = 0x80FF0000;
+
+	ltq_gphy_phy11g_a1x_load(fw_addr);
+
+	ltq_cgu_gphy_clk_src(clk);
+
+	ltq_rcu_gphy_boot(0, fw_addr);
+	ltq_rcu_gphy_boot(1, fw_addr);
+
+	return ltq_eth_initialize(&eth_board_config);
+}
--- a/boards.cfg
+++ b/boards.cfg
@@ -540,6 +540,8 @@ Active  mips        mips32         vrx20
 Active  mips        mips32         vrx200      zte             zxhnh367n           zxhnh367n_nandspl                    zxhnh367n:SYS_BOOT_NANDSPL                                                                                                        Luka Perkov <luka@openwrt.org>
 Active  mips        mips32         vrx200      zte             zxhnh367n           zxhnh367n_ram                        zxhnh367n:SYS_BOOT_RAM                                                                                                            Luka Perkov <luka@openwrt.org>
 Active  mips        mips32         vrx200      zte             zxhnh367n           zxhnh367n_zte                        zxhnh367n:SYS_BOOT_ZTE                                                                                                            Luka Perkov <luka@openwrt.org>
+Active  mips        mips32         vrx200      zyxel           p2812hnufx          p2812hnufx_nandspl                   p2812hnufx:SYS_BOOT_NANDSPL                                                                                                       Luka Perkov <luka@openwrt.org>
+Active  mips        mips32         vrx200      zyxel           p2812hnufx          p2812hnufx_ram                       p2812hnufx:SYS_BOOT_RAM                                                                                                           Luka Perkov <luka@openwrt.org>
 Active  mips        mips64         -           -               qemu-mips           qemu_mips64                          qemu-mips64:SYS_BIG_ENDIAN                                                                                                        -
 Active  mips        mips64         -           -               qemu-mips           qemu_mips64el                        qemu-mips64:SYS_LITTLE_ENDIAN                                                                                                     -
 Active  nds32       n1213          ag101       AndesTech       adp-ag101           adp-ag101                            -                                                                                                                                 Andes <uboot@andestech.com>
--- /dev/null
+++ b/include/configs/p2812hnufx.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2013 Luka Perkov <luka@openwrt.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MACH_TYPE	"P-2812HNU-Fx"
+#define CONFIG_IDENT_STRING	" "CONFIG_MACH_TYPE
+#define CONFIG_BOARD_NAME	"ZyXEL P-2812HNU-Fx"
+
+/* Configure SoC */
+#define CONFIG_LTQ_SUPPORT_UART			/* Enable ASC and UART */
+
+#define CONFIG_LTQ_SUPPORT_ETHERNET		/* Enable ethernet */
+
+#define CONFIG_LTQ_SUPPORT_NAND_FLASH		/* Have a K9F1G08U0D NAND flash */
+
+#define CONFIG_LTQ_SUPPORT_SPL_NAND_FLASH	/* Build NAND flash SPL */
+#define CONFIG_LTQ_SPL_COMP_LZO			/* Compress SPL with LZO */
+#define CONFIG_LTQ_SPL_CONSOLE			/* Enable SPL console */
+
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x4000
+
+#define CONFIG_SYS_DRAM_PROBE
+
+/* Environment */
+#if defined(CONFIG_SYS_BOOT_NANDSPL)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET		(256 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
+#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
+
+/* Console */
+#define CONFIG_LTQ_ADVANCED_CONSOLE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_CONSOLE_ASC		1
+#define CONFIG_CONSOLE_DEV		"ttyLTQ1"
+
+/* Pull in default board configs for Lantiq XWAY VRX200 */
+#include <asm/lantiq/config.h>
+#include <asm/arch/config.h>
+
+/* Pull in default OpenWrt configs for Lantiq SoC */
+#include "openwrt-lantiq-common.h"
+
+#define CONFIG_ENV_UPDATE_UBOOT_NAND					\
+	"update-uboot-nand=run load-uboot-nandspl-lzo write-uboot-nand\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	CONFIG_ENV_LANTIQ_DEFAULTS	\
+	CONFIG_ENV_UPDATE_UBOOT_NAND
+
+#endif /* __CONFIG_H */