openwrt_chaos_calmer/package/utils/busybox/config/libbb/Config.in

# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#

menu "Busybox Library Tuning"

config BUSYBOX_CONFIG_FEATURE_SYSTEMD
	bool "Enable systemd support"
	default BUSYBOX_DEFAULT_FEATURE_SYSTEMD
	help
	  If you plan to use busybox daemons on a system where daemons
	  are controlled by systemd, enable this option.
	  If you don't use systemd, it is still safe to enable it,
	  but the downside is increased code size.
config BUSYBOX_CONFIG_FEATURE_RTMINMAX
	bool "Support RTMIN[+n] and RTMAX[-n] signal names"
	default BUSYBOX_DEFAULT_FEATURE_RTMINMAX
	help
	  Support RTMIN[+n] and RTMAX[-n] signal names
	  in kill, killall etc. This costs ~250 bytes.

config BUSYBOX_CONFIG_PASSWORD_MINLEN
	int "Minimum password length"
	default BUSYBOX_DEFAULT_PASSWORD_MINLEN
	range 5 32
	help
	  Minimum allowable password length.

config BUSYBOX_CONFIG_MD5_SMALL
	int "MD5: Trade bytes for speed (0:fast, 3:slow)"
	default BUSYBOX_DEFAULT_MD5_SMALL
	range 0 3
	help
	  Trade binary size versus speed for the md5sum algorithm.
	  Approximate values running uClibc and hashing
	  linux-2.4.4.tar.bz2 were:
	                    user times (sec)  text size (386)
	  0 (fastest)         1.1                6144
	  1                   1.4                5392
	  2                   3.0                5088
	  3 (smallest)        5.1                4912

config BUSYBOX_CONFIG_SHA3_SMALL
	int "SHA3: Trade bytes for speed (0:fast, 1:slow)"
	default BUSYBOX_DEFAULT_SHA3_SMALL
	range 0 1
	help
	  Trade binary size versus speed for the sha3sum algorithm.
	  SHA3_SMALL=0 compared to SHA3_SMALL=1 (approximate):
	  64-bit x86: +270 bytes of code, 45% faster
	  32-bit x86: +450 bytes of code, 75% faster

config BUSYBOX_CONFIG_FEATURE_FAST_TOP
	bool "Faster /proc scanning code (+100 bytes)"
	default BUSYBOX_DEFAULT_FEATURE_FAST_TOP
	help
	  This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
	  but code size is slightly bigger.

config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
	bool "Support for /etc/networks"
	default BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
	help
	  Enable support for network names in /etc/networks. This is
	  a rarely used feature which allows you to use names
	  instead of IP/mask pairs in route command.

config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
	bool "Use termios to manipulate the screen"
	default BUSYBOX_DEFAULT_FEATURE_USE_TERMIOS
	depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_POWERTOP
	help
	  This option allows utilities such as 'more' and 'top' to determine
	  the size of the screen. If you leave this disabled, your utilities
	  that display things on the screen will be especially primitive and
	  will be unable to determine the current screen size, and will be
	  unable to move the cursor.

config BUSYBOX_CONFIG_FEATURE_EDITING
	bool "Command line editing"
	default BUSYBOX_DEFAULT_FEATURE_EDITING
	help
	  Enable line editing (mainly for shell command line).

config BUSYBOX_CONFIG_FEATURE_EDITING_MAX_LEN
	int "Maximum length of input"
	range 128 8192
	default BUSYBOX_DEFAULT_FEATURE_EDITING_MAX_LEN
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Line editing code uses on-stack buffers for storage.
	  You may want to decrease this parameter if your target machine
	  benefits from smaller stack usage.

config BUSYBOX_CONFIG_FEATURE_EDITING_VI
	bool "vi-style line editing commands"
	default BUSYBOX_DEFAULT_FEATURE_EDITING_VI
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Enable vi-style line editing. In shells, this mode can be
	  turned on and off with "set -o vi" and "set +o vi".

config BUSYBOX_CONFIG_FEATURE_EDITING_HISTORY
	int "History size"
	# Don't allow way too big values here, code uses fixed "char *history[N]" struct member
	range 0 9999
	default BUSYBOX_DEFAULT_FEATURE_EDITING_HISTORY
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Specify command history size (0 - disable).

config BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
	bool "History saving"
	default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVEHISTORY
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Enable history saving in shells.

config BUSYBOX_CONFIG_FEATURE_EDITING_SAVE_ON_EXIT
	bool "Save history on shell exit, not after every command"
	default BUSYBOX_DEFAULT_FEATURE_EDITING_SAVE_ON_EXIT
	depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
	help
	  Save history on shell exit, not after every command.

config BUSYBOX_CONFIG_FEATURE_REVERSE_SEARCH
	bool "Reverse history search"
	default BUSYBOX_DEFAULT_FEATURE_REVERSE_SEARCH
	depends on BUSYBOX_CONFIG_FEATURE_EDITING_SAVEHISTORY
	help
	  Enable readline-like Ctrl-R combination for reverse history search.
	  Increases code by about 0.5k.

config BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
	bool "Tab completion"
	default BUSYBOX_DEFAULT_FEATURE_TAB_COMPLETION
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Enable tab completion.

config BUSYBOX_CONFIG_FEATURE_USERNAME_COMPLETION
	bool "Username completion"
	default BUSYBOX_DEFAULT_FEATURE_USERNAME_COMPLETION
	depends on BUSYBOX_CONFIG_FEATURE_TAB_COMPLETION
	help
	  Enable username completion.

config BUSYBOX_CONFIG_FEATURE_EDITING_FANCY_PROMPT
	bool "Fancy shell prompts"
	default BUSYBOX_DEFAULT_FEATURE_EDITING_FANCY_PROMPT
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Setting this option allows for prompts to use things like \w and
	  \$ and escape codes.

config BUSYBOX_CONFIG_FEATURE_EDITING_ASK_TERMINAL
	bool "Query cursor position from terminal"
	default BUSYBOX_DEFAULT_FEATURE_EDITING_ASK_TERMINAL
	depends on BUSYBOX_CONFIG_FEATURE_EDITING
	help
	  Allow usage of "ESC [ 6 n" sequence. Terminal answers back with
	  current cursor position. This information is used to make line
	  editing more robust in some cases.
	  If you are not sure whether your terminals respond to this code
	  correctly, or want to save on code size (about 400 bytes),
	  then do not turn this option on.

config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
	bool "Non-POSIX, but safer, copying to special nodes"
	default BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
	help
	  With this option, "cp file symlink" will delete symlink
	  and create a regular file. This does not conform to POSIX,
	  but prevents a symlink attack.
	  Similarly, "cp file device" will not send file's data
	  to the device. (To do that, use "cat file >device")

config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
	bool "Give more precise messages when copy fails (cp, mv etc)"
	default BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
	help
	  Error messages with this feature enabled:
	    $ cp file /does_not_exist/file
	    cp: cannot create '/does_not_exist/file': Path does not exist
	    $ cp file /vmlinuz/file
	    cp: cannot stat '/vmlinuz/file': Path has non-directory component
	  If this feature is not enabled, they will be, respectively:
	    cp: cannot create '/does_not_exist/file': No such file or directory
	    cp: cannot stat '/vmlinuz/file': Not a directory
	  This will cost you ~60 bytes.

config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
	int "Copy buffer size, in kilobytes"
	range 1 1024
	default BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
	help
	  Size of buffer used by cp, mv, install, wget etc.
	  Buffers which are 4 kb or less will be allocated on stack.
	  Bigger buffers will be allocated with mmap, with fallback to 4 kb
	  stack buffer if mmap fails.

config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
	bool "Skip rootfs in mount table"
	default BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
	help
	  Ignore rootfs entry in mount table.

	  In Linux, kernel has a special filesystem, rootfs, which is initially
	  mounted on /. It contains initramfs data, if kernel is configured
	  to have one. Usually, another file system is mounted over / early
	  in boot process, and therefore most tools which manipulate
	  mount table, such as df, will skip rootfs entry.

	  However, some systems do not mount anything on /.
	  If you need to configure busybox for one of these systems,
	  you may find it useful to turn this option off to make df show
	  initramfs statistics.

	  Otherwise, choose Y.

config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
	bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
	default BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
	select BUSYBOX_CONFIG_PLATFORM_LINUX
	help
	  Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
	  time intervals (time, ping, traceroute etc need this).
	  Probably requires Linux 2.6+. If not selected, gettimeofday
	  will be used instead (which gives wrong results if date/time
	  is reset).

config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
	bool "Use ioctl names rather than hex values in error messages"
	default BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
	help
	  Use ioctl names rather than hex values in error messages
	  (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
	  saves about 1400 bytes.

config BUSYBOX_CONFIG_FEATURE_HWIB
	bool "Support infiniband HW"
	default BUSYBOX_DEFAULT_FEATURE_HWIB
	help
	  Support for printing infiniband addresses in
	  network applets.

endmenu