123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384 |
- --- a/arch/mips/ath79/mach-ap81.c
- +++ b/arch/mips/ath79/mach-ap81.c
- @@ -9,12 +9,16 @@
- * by the Free Software Foundation.
- */
-
- -#include "machtypes.h"
- -#include "dev-wmac.h"
- +#include <linux/mtd/mtd.h>
- +#include <linux/mtd/partitions.h>
- +
- +#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- -#include "dev-spi.h"
- +#include "dev-m25p80.h"
- #include "dev-usb.h"
- +#include "dev-wmac.h"
- +#include "machtypes.h"
-
- #define AP81_GPIO_LED_STATUS 1
- #define AP81_GPIO_LED_AOSS 3
- @@ -67,20 +71,6 @@ static struct gpio_keys_button ap81_gpio
- }
- };
-
- -static struct spi_board_info ap81_spi_info[] = {
- - {
- - .bus_num = 0,
- - .chip_select = 0,
- - .max_speed_hz = 25000000,
- - .modalias = "m25p64",
- - }
- -};
- -
- -static struct ath79_spi_platform_data ap81_spi_data = {
- - .bus_num = 0,
- - .num_chipselect = 1,
- -};
- -
- static void __init ap81_setup(void)
- {
- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
- @@ -90,10 +80,24 @@ static void __init ap81_setup(void)
- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap81_gpio_keys),
- ap81_gpio_keys);
- - ath79_register_spi(&ap81_spi_data, ap81_spi_info,
- - ARRAY_SIZE(ap81_spi_info));
- + ath79_register_m25p80(NULL);
- ath79_register_wmac(cal_data, NULL);
- ath79_register_usb();
- +
- + ath79_register_mdio(0, 0x0);
- +
- + ath79_init_mac(ath79_eth0_data.mac_addr, cal_data, 0);
- + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- + ath79_eth0_data.speed = SPEED_100;
- + ath79_eth0_data.duplex = DUPLEX_FULL;
- + ath79_eth0_data.has_ar8216 = 1;
- +
- + ath79_init_mac(ath79_eth1_data.mac_addr, cal_data, 1);
- + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- + ath79_eth1_data.phy_mask = 0x10;
- +
- + ath79_register_eth(0);
- + ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
- --- a/arch/mips/ath79/Kconfig
- +++ b/arch/mips/ath79/Kconfig
- @@ -30,9 +30,10 @@ config ATH79_MACH_AP136
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
- select SOC_AR913X
- + select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- - select ATH79_DEV_SPI
- + select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
|