openwrt_chaos_calmer/target/linux/bcm53xx/patches-3.18/814-USB-bcma-improve-USB-2.0-PHY-support-for-BCM4709-and.patch

From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Subject: [PATCH] USB: bcma: improve USB 2.0 PHY support for BCM4709 and
 BCM47094
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
--- a/drivers/usb/host/bcma-hcd.c
+++ b/drivers/usb/host/bcma-hcd.c
@@ -30,6 +30,17 @@
 #include <linux/usb/ehci_pdriver.h>
 #include <linux/usb/ohci_pdriver.h>
 
+/* DMU (Device Management Unit) */
+#define BCMA_DMU_CRU_USB2_CONTROL			0x0164
+#define  BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK	0x00000FFC
+#define  BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT	2
+#define  BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK	0x00007000
+#define  BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT	12
+#define BCMA_DMU_CRU_CLKSET_KEY				0x0180
+#define BCMA_DMU_CRU_STRAPS_CTRL			0x02A0
+#define  BCMA_DMU_CRU_STRAPS_CTRL_USB3			0x00000010
+#define  BCMA_DMU_CRU_STRAPS_CTRL_4BYTE			0x00008000
+
 MODULE_AUTHOR("Hauke Mehrtens");
 MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
 MODULE_LICENSE("GPL");
@@ -166,10 +177,35 @@ static void bcma_hcd_init_chip_mips(stru
 	}
 }
 
+static u32 bcma_hcd_usb_ref_clk_get_rate(void __iomem *dmu)
+{
+	u32 val, ndiv, pdiv, ch2_mdiv, ch2_freq;
+
+	/* get divider integer from the cru_genpll_control5 */
+	val = ioread32(dmu + 0x154);
+	ndiv = (val >> 20) & 0x3ff;
+	if (ndiv == 0)
+		ndiv = 1 << 10;
+
+	/* get pdiv and ch2_mdiv from the cru_genpll_control6 */
+	val = ioread32(dmu + 0x158);
+	pdiv = (val >> 24) & 0x7;
+	pdiv = (pdiv == 0) ? (1 << 3) : pdiv;
+
+	ch2_mdiv = val & 0xff;
+	ch2_mdiv = (ch2_mdiv == 0) ? (1 << 8) : ch2_mdiv;
+
+	/* calculate ch2_freq based on 25MHz reference clock */
+	ch2_freq = (25000000 / (pdiv * ch2_mdiv)) * ndiv;
+
+	return ch2_freq;
+}
+
 static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
 {
 	struct bcma_device *arm_core;
 	void __iomem *dmu;
+	u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
 
 	arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
 	if (!arm_core) {
@@ -183,14 +219,29 @@ static void bcma_hcd_init_chip_arm_phy(s
 		return;
 	}
 
+	ref_clk_rate = bcma_hcd_usb_ref_clk_get_rate(dmu);
+
+	usb2ctl = ioread32(dmu + BCMA_DMU_CRU_USB2_CONTROL);
+
+	usb_pll_pdiv = usb2ctl;
+	usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
+	usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
+	if (!usb_pll_pdiv)
+		usb_pll_pdiv = 1 << 3;
+
+	/* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
+	usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
+
 	/* Unlock DMU PLL settings */
-	iowrite32(0x0000ea68, dmu + 0x180);
+	iowrite32(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
 
 	/* Write USB 2.0 PLL control setting */
-	iowrite32(0x00dd10c3, dmu + 0x164);
+	usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
+	usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
+	iowrite32(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
 
 	/* Lock DMU PLL settings */
-	iowrite32(0x00000000, dmu + 0x180);
+	iowrite32(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
 
 	iounmap(dmu);
 }
@@ -218,15 +269,17 @@ static void bcma_hcd_init_chip_arm_hc(st
 
 static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
 {
+	struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
+
 	bcma_core_enable(dev, 0);
 
-	if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
-	    dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
-		if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
-		    dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
-			bcma_hcd_init_chip_arm_phy(dev);
+	if (chipinfo->id == BCMA_CHIP_ID_BCM4707 ||
+	    chipinfo->id == BCMA_CHIP_ID_BCM47094 ||
+	    chipinfo->id == BCMA_CHIP_ID_BCM53018) {
+		bcma_hcd_init_chip_arm_phy(dev);
 
-		bcma_hcd_init_chip_arm_hc(dev);
+		if (1) /* TODO: Exclude BCM53573 */
+			bcma_hcd_init_chip_arm_hc(dev);
 	}
 }