123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131 |
- --- a/drivers/net/wireless/broadcom/b43/main.c
- +++ b/drivers/net/wireless/broadcom/b43/main.c
- @@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st
- len, ram_offset, shm_size_offset, rate);
-
- /* Write the PHY TX control parameters. */
- - antenna = B43_ANTENNA_DEFAULT;
- + antenna = dev->tx_antenna;
- antenna = b43_antenna_to_phyctl(antenna);
- ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
- /* We can't send beacons with short preamble. Would get PHY errors. */
- @@ -3300,8 +3300,8 @@ static int b43_chip_init(struct b43_wlde
-
- /* Select the antennae */
- if (phy->ops->set_rx_antenna)
- - phy->ops->set_rx_antenna(dev, B43_ANTENNA_DEFAULT);
- - b43_mgmtframe_txantenna(dev, B43_ANTENNA_DEFAULT);
- + phy->ops->set_rx_antenna(dev, dev->rx_antenna);
- + b43_mgmtframe_txantenna(dev, dev->tx_antenna);
-
- if (phy->type == B43_PHYTYPE_B) {
- value16 = b43_read16(dev, 0x005E);
- @@ -4001,7 +4001,6 @@ static int b43_op_config(struct ieee8021
- struct b43_wldev *dev = wl->current_dev;
- struct b43_phy *phy = &dev->phy;
- struct ieee80211_conf *conf = &hw->conf;
- - int antenna;
- int err = 0;
-
- mutex_lock(&wl->mutex);
- @@ -4044,11 +4043,9 @@ static int b43_op_config(struct ieee8021
- }
-
- /* Antennas for RX and management frame TX. */
- - antenna = B43_ANTENNA_DEFAULT;
- - b43_mgmtframe_txantenna(dev, antenna);
- - antenna = B43_ANTENNA_DEFAULT;
- + b43_mgmtframe_txantenna(dev, dev->tx_antenna);
- if (phy->ops->set_rx_antenna)
- - phy->ops->set_rx_antenna(dev, antenna);
- + phy->ops->set_rx_antenna(dev, dev->rx_antenna);
-
- if (wl->radio_enabled != phy->radio_on) {
- if (wl->radio_enabled) {
- @@ -5209,6 +5206,47 @@ static int b43_op_get_survey(struct ieee
- return 0;
- }
-
- +static int b43_op_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
- +{
- + struct b43_wl *wl = hw_to_b43_wl(hw);
- + struct b43_wldev *dev = wl->current_dev;
- +
- + if (tx_ant == 1 && rx_ant == 1) {
- + dev->tx_antenna = B43_ANTENNA0;
- + dev->rx_antenna = B43_ANTENNA0;
- + }
- + else if (tx_ant == 2 && rx_ant == 2) {
- + dev->tx_antenna = B43_ANTENNA1;
- + dev->rx_antenna = B43_ANTENNA1;
- + }
- + else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3) {
- + dev->tx_antenna = B43_ANTENNA_DEFAULT;
- + dev->rx_antenna = B43_ANTENNA_DEFAULT;
- + }
- + else {
- + return -EINVAL;
- + }
- +
- + return 0;
- +}
- +
- +
- +static int b43_op_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
- +{
- + struct b43_wl *wl = hw_to_b43_wl(hw);
- + struct b43_wldev *dev = wl->current_dev;
- +
- + switch (dev->tx_antenna) {
- + case B43_ANTENNA0:
- + *tx_ant = 1; *rx_ant = 1; break;
- + case B43_ANTENNA1:
- + *tx_ant = 2; *rx_ant = 2; break;
- + case B43_ANTENNA_DEFAULT:
- + *tx_ant = 3; *rx_ant = 3; break;
- + }
- + return 0;
- +}
- +
- static const struct ieee80211_ops b43_hw_ops = {
- .tx = b43_op_tx,
- .conf_tx = b43_op_conf_tx,
- @@ -5230,6 +5268,8 @@ static const struct ieee80211_ops b43_hw
- .sw_scan_complete = b43_op_sw_scan_complete_notifier,
- .get_survey = b43_op_get_survey,
- .rfkill_poll = b43_rfkill_poll,
- + .set_antenna = b43_op_set_antenna,
- + .get_antenna = b43_op_get_antenna,
- };
-
- /* Hard-reset the chip. Do not call this directly.
- @@ -5538,6 +5578,8 @@ static int b43_one_core_attach(struct b4
- if (!wldev)
- goto out;
-
- + wldev->rx_antenna = B43_ANTENNA_DEFAULT;
- + wldev->tx_antenna = B43_ANTENNA_DEFAULT;
- wldev->use_pio = b43_modparam_pio;
- wldev->dev = dev;
- wldev->wl = wl;
- @@ -5628,6 +5670,9 @@ static struct b43_wl *b43_wireless_init(
-
- hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
-
- + hw->wiphy->available_antennas_rx = 0x3;
- + hw->wiphy->available_antennas_tx = 0x3;
- +
- wl->hw_registred = false;
- hw->max_rates = 2;
- SET_IEEE80211_DEV(hw, dev->dev);
- --- a/drivers/net/wireless/broadcom/b43/b43.h
- +++ b/drivers/net/wireless/broadcom/b43/b43.h
- @@ -840,6 +840,8 @@ struct b43_wldev {
- bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
- bool use_pio; /* TRUE if next init should use PIO */
- int gpiomask; /* GPIO LED mask as a module parameter */
- + int rx_antenna; /* Used RX antenna (B43_ANTENNAxxx) */
- + int tx_antenna; /* Used TX antenna (B43_ANTENNAxxx) */
-
- /* PHY/Radio device. */
- struct b43_phy phy;
|