| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121 |
- --- a/drivers/tty/serial/8250/8250_core.c
- +++ b/drivers/tty/serial/8250/8250_core.c
- @@ -416,6 +416,20 @@ static void mem_serial_out(struct uart_p
- writeb(value, p->membase + offset);
- }
-
- +static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
- +{
- + struct uart_8250_port *up = (struct uart_8250_port *)p;
- + udelay(up->port.rw_delay);
- + return mem_serial_in(p, offset);
- +}
- +
- +static void memdelay_serial_out(struct uart_port *p, int offset, int value)
- +{
- + struct uart_8250_port *up = (struct uart_8250_port *)p;
- + udelay(up->port.rw_delay);
- + mem_serial_out(p, offset, value);
- +}
- +
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = offset << p->regshift;
- @@ -466,6 +480,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
- + case UPIO_MEM_DELAY:
- + p->serial_in = memdelay_serial_in;
- + p->serial_out = memdelay_serial_out;
- + break;
- +
- #if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
- @@ -491,6 +510,7 @@ serial_port_out_sync(struct uart_port *p
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
- + case UPIO_MEM_DELAY:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
- @@ -2649,6 +2669,7 @@ static int serial8250_request_std_resour
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- + case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
- @@ -2685,6 +2706,7 @@ static void serial8250_release_std_resou
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
- + case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
- @@ -3418,6 +3440,7 @@ static int serial8250_probe(struct platf
- uart.port.set_termios = p->set_termios;
- uart.port.pm = p->pm;
- uart.port.dev = &dev->dev;
- + uart.port.rw_delay = p->rw_delay;
- uart.port.irqflags |= irqflag;
- ret = serial8250_register_8250_port(&uart);
- if (ret < 0) {
- @@ -3574,6 +3597,7 @@ int serial8250_register_8250_port(struct
- uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
- uart->bugs = up->bugs;
- uart->port.mapbase = up->port.mapbase;
- + uart->port.rw_delay = up->port.rw_delay;
- uart->port.private_data = up->port.private_data;
- uart->port.fifosize = up->port.fifosize;
- uart->tx_loadsz = up->tx_loadsz;
- --- a/drivers/tty/serial/serial_core.c
- +++ b/drivers/tty/serial/serial_core.c
- @@ -2090,6 +2090,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
- + case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
- @@ -2736,6 +2737,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
- + case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
- --- a/include/linux/serial_8250.h
- +++ b/include/linux/serial_8250.h
- @@ -27,6 +27,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
- + unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
- --- a/include/linux/serial_core.h
- +++ b/include/linux/serial_core.h
- @@ -146,6 +146,7 @@ struct uart_port {
- #define UPIO_MEM32 (3)
- #define UPIO_AU (4) /* Au1x00 and RT288x type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
- +#define UPIO_MEM_DELAY (6)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
- @@ -202,6 +203,7 @@ struct uart_port {
- int hw_stopped; /* sw-assisted CTS flow state */
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
- + unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
|
