123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139 |
- From f8c331bda6a90b239f600020eec1b0defe7249b5 Mon Sep 17 00:00:00 2001
- From: Florian Fainelli <f.fainelli@gmail.com>
- Date: Wed, 22 Jun 2016 17:00:35 -0700
- Subject: [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
- Add support for the Broadcom BCM953012 Enterprise Router reference
- board, enable the following peripherals:
- - UART0 (UART1 is not populated)
- - WPS and restart GPIO buttons
- - Ethernet switch w/ only two facing ports
- - NAND flash
- - SPI-NOR flash
- Acked-by: Jon Mason <jon.mason@broadcom.com>
- Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- ---
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 105 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm953012er.dts
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-dlink-dir-885l.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- + bcm953012er.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- --- /dev/null
- +++ b/arch/arm/boot/dts/bcm953012er.dts
- @@ -0,0 +1,104 @@
- +/*
- + * BSD LICENSE
- + *
- + * Copyright(c) 2016 Broadcom. All rights reserved.
- + *
- + * Redistribution and use in source and binary forms, with or without
- + * modification, are permitted provided that the following conditions
- + * are met:
- + *
- + * * Redistributions of source code must retain the above copyright
- + * notice, this list of conditions and the following disclaimer.
- + * * Redistributions in binary form must reproduce the above copyright
- + * notice, this list of conditions and the following disclaimer in
- + * the documentation and/or other materials provided with the
- + * distribution.
- + * * Neither the name of Broadcom Corporation nor the names of its
- + * contributors may be used to endorse or promote products derived
- + * from this software without specific prior written permission.
- + *
- + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- + */
- +
- +/dts-v1/;
- +
- +#include "bcm4708.dtsi"
- +#include "bcm5301x-nand-cs0-bch8.dtsi"
- +
- +/ {
- + model = "NorthStar Enterprise Router (BCM953012ER)";
- + compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
- +
- + aliases {
- + serial0 = &uart0;
- + };
- +
- + chosen {
- + stdout-path = "serial0:115200n8";
- + };
- +
- + memory {
- + reg = <0x00000000 0x8000000>;
- + };
- +
- + gpio-keys {
- + compatible = "gpio-keys";
- + #address-cells = <1>;
- + #size-cells = <0>;
- +
- + wps {
- + label = "WPS";
- + linux,code = <KEY_WPS_BUTTON>;
- + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- + };
- +
- + restart {
- + label = "Reset";
- + linux,code = <KEY_RESTART>;
- + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- + };
- + };
- +};
- +
- +&uart0 {
- + status = "okay";
- +};
- +
- +&spi_nor {
- + status = "okay";
- +};
- +
- +&srab {
- + status = "okay";
- +
- + ports {
- + #address-cells = <1>;
- + #size-cells = <0>;
- +
- + port@0 {
- + reg = <0>;
- + label = "port0";
- + };
- +
- + port@1 {
- + reg = <1>;
- + label = "port1";
- + };
- +
- + port@5 {
- + reg = <5>;
- + label = "cpu";
- + ethernet = <&gmac0>;
- + };
- + };
- +};
|