| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596 |
- From 811ae58e76da88106f6d28159d4ea7b163dfaa48 Mon Sep 17 00:00:00 2001
- From: INAGAKI Hiroshi <musashino.open@gmail.com>
- Date: Wed, 7 Mar 2018 20:33:56 +0900
- Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
- MIME-Version: 1.0
- Content-Type: text/plain; charset=UTF-8
- Content-Transfer-Encoding: 8bit
- Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
- dts and cannot configure these LEDs.
- I Added missing LED definitions for WZR-900DHP.
- Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
- Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
- Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- ---
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
- --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
- +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
- @@ -35,6 +35,74 @@
- 0x88000000 0x08000000>;
- };
-
- + spi {
- + compatible = "spi-gpio";
- + num-chipselects = <1>;
- + gpio-sck = <&chipcommon 7 0>;
- + gpio-mosi = <&chipcommon 4 0>;
- + cs-gpios = <&chipcommon 6 0>;
- + #address-cells = <1>;
- + #size-cells = <0>;
- +
- + hc595: gpio_spi@0 {
- + compatible = "fairchild,74hc595";
- + reg = <0>;
- + registers-number = <1>;
- + spi-max-frequency = <100000>;
- +
- + gpio-controller;
- + #gpio-cells = <2>;
- +
- + };
- + };
- +
- + leds {
- + compatible = "gpio-leds";
- +
- + usb {
- + label = "bcm53xx:green:usb";
- + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- + };
- +
- + power0 {
- + label = "bcm53xx:green:power";
- + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- + linux,default-trigger = "default-on";
- + };
- +
- + power1 {
- + label = "bcm53xx:red:power";
- + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- + };
- +
- + router0 {
- + label = "bcm53xx:green:router";
- + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- + linux,default-trigger = "default-on";
- + };
- +
- + router1 {
- + label = "bcm53xx:amber:router";
- + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- + };
- +
- + wan {
- + label = "bcm53xx:green:wan";
- + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- + linux,default-trigger = "default-on";
- + };
- +
- + wireless0 {
- + label = "bcm53xx:green:wireless";
- + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- + };
- +
- + wireless1 {
- + label = "bcm53xx:amber:wireless";
- + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- + };
- + };
- +
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
|
