| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 |
- # NVRAM file for BCM943430WLPTH
- # 2.4 GHz, 20 MHz BW mode
- # The following parameter values are just placeholders, need to be updated.
- manfid=0x2d0
- prodid=0x0727
- vendid=0x14e4
- devid=0x43e2
- boardtype=0x0727
- boardrev=0x1101
- boardnum=22
- macaddr=00:90:4c:c5:12:38
- sromrev=11
- boardflags=0x00404201
- boardflags3=0x08000000
- xtalfreq=37400
- nocrc=1
- ag0=255
- aa2g=1
- ccode=ALL
- pa0itssit=0x20
- extpagain2g=0
- #PA parameters for 2.4GHz, measured at CHIP OUTPUT
- pa2ga0=-168,7161,-820
- AvVmid_c0=0x0,0xc8
- cckpwroffset0=5
- # PPR params
- maxp2ga0=84
- txpwrbckof=6
- cckbw202gpo=0
- legofdmbw202gpo=0x66111111
- mcsbw202gpo=0x77711111
- propbw202gpo=0xdd
- # OFDM IIR :
- ofdmdigfilttype=18
- ofdmdigfilttypebe=18
- # PAPD mode:
- papdmode=1
- papdvalidtest=1
- pacalidx2g=42
- papdepsoffset=-22
- papdendidx=58
- # LTECX flags
- ltecxmux=0
- ltecxpadnum=0x0102
- ltecxfnsel=0x44
- ltecxgcigpio=0x01
- il0macaddr=00:90:4c:c5:12:38
- wl0id=0x431b
- deadman_to=0xffffffff
- # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
- muxenab=0x1
- # CLDO PWM voltage settings - 0x4 - 1.1 volt
- #cldo_pwm=0x4
- #VCO freq 326.4MHz
- spurconfig=0x3
- edonthd20l=-75
- edoffthd20ul=-80
|
