| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- From 12acd136913ccdf394eeb2bc8686ff5505368119 Mon Sep 17 00:00:00 2001
- From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
- Date: Thu, 12 Oct 2017 10:21:26 +0200
- Subject: [PATCH] net: bgmac: enable master mode for BCM54210E and B50212E PHYs
- MIME-Version: 1.0
- Content-Type: text/plain; charset=UTF-8
- Content-Transfer-Encoding: 8bit
- There are 4 very similar PHYs:
- 0x600d84a1: BCM54210E (rev B0)
- 0x600d84a2: BCM54210E (rev B1)
- 0x600d84a5: B50212E (rev B0)
- 0x600d84a6: B50212E (rev B1)
- that need setting master mode manually. It's because they run in slave
- mode by default with Automatic Slave/Master configuration disabled which
- can lead to unreliable connection with massive ping loss.
- So far it was reported for a board with BCM47189 SoC and B50212E B1 PHY
- connected to the bgmac supported ethernet device. Telling PHY driver to
- setup PHY properly solves this issue.
- Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
- Signed-off-by: David S. Miller <davem@davemloft.net>
- ---
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
- --- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
- +++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
- @@ -159,13 +159,19 @@ static int bgmac_probe(struct bcma_devic
-
- if (!bgmac_is_bcm4707_family(core) &&
- !(ci->id == BCMA_CHIP_ID_BCM53573 && core->core_unit == 1)) {
- + struct phy_device *phydev;
- +
- mii_bus = bcma_mdio_mii_register(bgmac);
- if (IS_ERR(mii_bus)) {
- err = PTR_ERR(mii_bus);
- goto err;
- }
- -
- bgmac->mii_bus = mii_bus;
- +
- + phydev = bgmac->mii_bus->phy_map[bgmac->phyaddr];
- + if (ci->id == BCMA_CHIP_ID_BCM53573 && phydev &&
- + (phydev->drv->phy_id & phydev->drv->phy_id_mask) == PHY_ID_BCM54210E)
- + phydev->dev_flags |= PHY_BRCM_EN_MASTER_MODE;
- }
-
- if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
|
