| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150 |
- --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
- +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
- @@ -31,6 +31,9 @@
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2a>;
- voltage-tolerance = <5>;
- + cooling-min-state = <0>;
- + cooling-max-state = <10>;
- + #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- @@ -46,6 +49,9 @@
- clock-names = "cpu", "l2";
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2b>;
- + cooling-min-state = <0>;
- + cooling-max-state = <10>;
- + #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- @@ -70,6 +76,92 @@
- };
- };
-
- + thermal-zones {
- + cpu-thermal0 {
- + polling-delay-passive = <250>;
- + polling-delay = <1000>;
- +
- + thermal-sensors = <&gcc 5>;
- + coefficients = <1132 0>;
- +
- + trips {
- + cpu_alert0: trip0 {
- + temperature = <75000>;
- + hysteresis = <2000>;
- + type = "passive";
- + };
- + cpu_crit0: trip1 {
- + temperature = <110000>;
- + hysteresis = <2000>;
- + type = "critical";
- + };
- + };
- + };
- +
- + cpu-thermal1 {
- + polling-delay-passive = <250>;
- + polling-delay = <1000>;
- +
- + thermal-sensors = <&gcc 6>;
- + coefficients = <1132 0>;
- +
- + trips {
- + cpu_alert1: trip0 {
- + temperature = <75000>;
- + hysteresis = <2000>;
- + type = "passive";
- + };
- + cpu_crit1: trip1 {
- + temperature = <110000>;
- + hysteresis = <2000>;
- + type = "critical";
- + };
- + };
- + };
- +
- + cpu-thermal2 {
- + polling-delay-passive = <250>;
- + polling-delay = <1000>;
- +
- + thermal-sensors = <&gcc 7>;
- + coefficients = <1199 0>;
- +
- + trips {
- + cpu_alert2: trip0 {
- + temperature = <75000>;
- + hysteresis = <2000>;
- + type = "passive";
- + };
- + cpu_crit2: trip1 {
- + temperature = <110000>;
- + hysteresis = <2000>;
- + type = "critical";
- + };
- + };
- + };
- +
- + cpu-thermal3 {
- + polling-delay-passive = <250>;
- + polling-delay = <1000>;
- +
- + thermal-sensors = <&gcc 8>;
- + coefficients = <1132 0>;
- +
- + trips {
- + cpu_alert3: trip0 {
- + temperature = <75000>;
- + hysteresis = <2000>;
- + type = "passive";
- + };
- + cpu_crit3: trip1 {
- + temperature = <110000>;
- + hysteresis = <2000>;
- + type = "critical";
- + };
- + };
- + };
- + };
- +
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
- @@ -172,6 +264,21 @@
- reg-names = "lpass-lpaif";
- };
-
- + qfprom: qfprom@700000 {
- + compatible = "qcom,qfprom", "syscon";
- + reg = <0x00700000 0x1000>;
- + #address-cells = <1>;
- + #size-cells = <1>;
- + ranges;
- +
- + tsens_calib: calib {
- + reg = <0x400 0x10>;
- + };
- + tsens_backup: backup_calib {
- + reg = <0x410 0x10>;
- + };
- + };
- +
- rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
- @@ -499,8 +606,12 @@
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
- reg = <0x00900000 0x4000>;
- + nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- + nvmem-cell-names = "calib", "calib_backup";
- #clock-cells = <1>;
- #reset-cells = <1>;
- + #power-domain-cells = <1>;
- + #thermal-sensor-cells = <1>;
- };
-
- tcsr: syscon@1a400000 {
|
