openwrt_lede/target/linux/layerscape/patches-4.4/3131-arm64-ls1046a-add-DTS-for-Freescale-LS1046A-SoC.patch

From 80ca93f1a5590529e39560099a71edb03897050e Mon Sep 17 00:00:00 2001
From: Mingkai Hu <mingkai.hu@nxp.com>
Date: Wed, 11 May 2016 11:29:51 +0800
Subject: [PATCH 131/141] arm64/ls1046a: add DTS for Freescale LS1046A SoC

LS1046a is an SoC with 4 ARMv8 A72 cores and most other IP blocks
similar to LS1043a which complies to Chassis 2.1 spec.

Following levels of DTSI/DTS files have been created for the
LS1046A SoC family:

- fsl-ls1046a.dtsi:
  DTS-Include file for FSL LS1046A SoC.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Mihai Bantea <mihai.bantea@freescale.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 1029 ++++++++++++++++++++++++
 1 file changed, 1029 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -0,0 +1,1029 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2016, Freescale Semiconductor
+ *
+ * Mingkai Hu <mingkai.hu@nxp.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+	compatible = "fsl,ls1046a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fm1mac1;
+		ethernet1 = &fm1mac2;
+		ethernet2 = &fm1mac3;
+		ethernet3 = &fm1mac4;
+		ethernet4 = &fm1mac5;
+		ethernet5 = &fm1mac6;
+		ethernet6 = &fm1mac9;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			clocks = <&clockgen 1 0>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0 0x80000000>;
+		      /* DRAM space 1, size: 2GiB DRAM */
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0x1>, /* Physical Secure PPI */
+			     <1 14 0x1>, /* Physical Non-Secure PPI */
+			     <1 11 0x1>, /* Virtual PPI */
+			     <1 10 0x1>; /* Hypervisor PPI */
+		arm,reread-timer;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 106 0x4>,
+			     <0 107 0x4>,
+			     <0 95 0x4>,
+			     <0 97 0x4>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
+		      <0x0 0x1420000 0 0x20000>, /* GICC */
+		      <0x0 0x1440000 0 0x20000>, /* GICH */
+		      <0x0 0x1460000 0 0x20000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1046a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		scfg: scfg@1570000 {
+			compatible = "fsl,ls1046a-scfg", "syscon";
+			reg = <0x0 0x1570000 0x0 0x10000>;
+			big-endian;
+		};
+
+		reset: reset@1ee00b0 {
+			compatible = "fsl,ls-reset";
+			reg = <0x0 0x1ee00b0 0x0 0x4>;
+			big-endian;
+		};
+
+		rcpm: rcpm@1ee2000 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1";
+			reg = <0x0 0x1ee2000 0x0 0x10000>;
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		esdhc: esdhc@1560000 {
+			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x1560000 0x0 0x10000>;
+			interrupts = <0 62 0x4>;
+			clock-frequency = <0>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			big-endian;
+			bus-width = <4>;
+		};
+
+		qman: qman@1880000 {
+			compatible = "fsl,qman";
+			reg = <0x00 0x1880000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+		};
+
+		bman: bman@1890000 {
+			compatible = "fsl,bman";
+			reg = <0x00 0x1890000 0x0 0x10000>;
+			interrupts = <0 45 0x4>;
+		};
+
+		fman0: fman@1a00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			compatible = "fsl,fman", "simple-bus";
+			ranges = <0x0 0x00 0x1a00000 0x100000>;
+			reg = <0x00 0x1a00000 0x0 0x100000>;
+			interrupts = <0 44 0x4>, <0 45 0x4>;
+			clocks = <&clockgen 3 0>;
+			clock-names = "fmanclk";
+
+			cc {
+				compatible = "fsl,fman-cc";
+			};
+
+			muram@0 {
+				compatible = "fsl,fman-muram";
+				reg = <0x0 0x60000>;
+			};
+
+			bmi@80000 {
+				compatible = "fsl,fman-bmi";
+				reg = <0x80000 0x400>;
+			};
+
+			qmi@80400 {
+				compatible = "fsl,fman-qmi";
+				reg = <0x80400 0x400>;
+			};
+
+			fman0_oh1: port@82000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x82000 0x1000>;
+			};
+
+			fman0_oh2: port@83000 {
+				cell-index = <1>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x83000 0x1000>;
+			};
+
+			fman0_oh3: port@84000 {
+				cell-index = <2>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x84000 0x1000>;
+			};
+
+			fman0_oh4: port@85000 {
+				cell-index = <3>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x85000 0x1000>;
+			};
+
+			fman0_oh5: port@86000 {
+				cell-index = <4>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x86000 0x1000>;
+			};
+
+			fman0_oh6: port@87000 {
+				cell-index = <5>;
+				compatible = "fsl,fman-port-oh";
+				reg = <0x87000 0x1000>;
+			};
+
+			policer@c0000 {
+				compatible = "fsl,fman-policer";
+				reg = <0xc0000 0x1000>;
+			};
+
+			keygen@c1000 {
+				compatible = "fsl,fman-keygen";
+				reg = <0xc1000 0x1000>;
+			};
+
+			dma@c2000 {
+				compatible = "fsl,fman-dma";
+				reg = <0xc2000 0x1000>;
+			};
+
+			fpm@c3000 {
+				compatible = "fsl,fman-fpm";
+				reg = <0xc3000 0x1000>;
+			};
+
+			parser@c7000 {
+				compatible = "fsl,fman-parser";
+				reg = <0xc7000 0x1000>;
+			};
+
+			vsps@dc000 {
+				compatible = "fsl,fman-vsps";
+				reg = <0xdc000 0x1000>;
+			};
+
+			mdio0: mdio@fc000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xfc000 0x1000>;
+			};
+
+			xmdio0: mdio@fd000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xfd000 0x1000>;
+			};
+
+			fman0_rx0: port@88000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x88000 0x1000>;
+			};
+
+			fman0_tx0: port@a8000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xa8000 0x1000>;
+			};
+
+			fm1mac1: ethernet@e0000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-memac";
+				reg = <0xe0000 0x1000>;
+				fsl,port-handles = <&fman0_rx0 &fman0_tx0>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@e1000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xe1000 0x1000>;
+			};
+
+			fman0_rx1: port@89000 {
+				cell-index = <1>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x89000 0x1000>;
+			};
+
+			fman0_tx1: port@a9000 {
+				cell-index = <1>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xa9000 0x1000>;
+			};
+
+			fm1mac2: ethernet@e2000 {
+				cell-index = <1>;
+				compatible = "fsl,fman-memac";
+				reg = <0xe2000 0x1000>;
+				fsl,port-handles = <&fman0_rx1 &fman0_tx1>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@e3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xe3000 0x1000>;
+			};
+
+			fman0_rx2: port@8a000 {
+				cell-index = <2>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x8a000 0x1000>;
+			};
+
+			fman0_tx2: port@aa000 {
+				cell-index = <2>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xaa000 0x1000>;
+			};
+
+			fm1mac3: ethernet@e4000 {
+				cell-index = <2>;
+				compatible = "fsl,fman-memac";
+				reg = <0xe4000 0x1000>;
+				fsl,port-handles = <&fman0_rx2 &fman0_tx2>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@e5000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xe5000 0x1000>;
+			};
+
+			fman0_rx3: port@8b000 {
+				cell-index = <3>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x8b000 0x1000>;
+			};
+
+			fman0_tx3: port@ab000 {
+				cell-index = <3>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xab000 0x1000>;
+			};
+
+			fm1mac4: ethernet@e6000 {
+				cell-index = <3>;
+				compatible = "fsl,fman-memac";
+				reg = <0xe6000 0x1000>;
+				fsl,port-handles = <&fman0_rx3 &fman0_tx3>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@e7000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xe7000 0x1000>;
+			};
+
+			fman0_rx4: port@8c000 {
+				cell-index = <4>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x8c000 0x1000>;
+			};
+
+			fman0_tx4: port@ac000 {
+				cell-index = <4>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xac000 0x1000>;
+			};
+
+			fm1mac5: ethernet@e8000 {
+				cell-index = <4>;
+				compatible = "fsl,fman-memac";
+				reg = <0xe8000 0x1000>;
+				fsl,port-handles = <&fman0_rx4 &fman0_tx4>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@e9000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xe9000 0x1000>;
+			};
+
+			fman0_rx5: port@8d000 {
+				cell-index = <5>;
+				compatible = "fsl,fman-port-1g-rx";
+				reg = <0x8d000 0x1000>;
+			};
+
+			fman0_tx5: port@ad000 {
+				cell-index = <5>;
+				compatible = "fsl,fman-port-1g-tx";
+				reg = <0xad000 0x1000>;
+			};
+
+			fm1mac6: ethernet@ea000 {
+				cell-index = <5>;
+				compatible = "fsl,fman-memac";
+				reg = <0xea000 0x1000>;
+				fsl,port-handles = <&fman0_rx5 &fman0_tx5>;
+				ptimer-handle = <&ptp_timer0>;
+			};
+
+			mdio@eb000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xeb000 0x1000>;
+			};
+
+			fman0_10g_rx0: port@90000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-port-10g-rx";
+				reg = <0x90000 0x1000>;
+			};
+
+			fman0_10g_tx0: port@b0000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-port-10g-tx";
+				reg = <0xb0000 0x1000>;
+				fsl,qman-channel-id = <0x800>;
+			};
+
+			fm1mac9: ethernet@f0000 {
+				cell-index = <0>;
+				compatible = "fsl,fman-memac";
+				reg = <0xf0000 0x1000>;
+				fsl,port-handles = <&fman0_10g_rx0 &fman0_10g_tx0>;
+			};
+
+			mdio@f1000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,fman-memac-mdio";
+				reg = <0xf1000 0x1000>;
+			};
+
+			ptp_timer0: rtc@fe000 {
+				compatible = "fsl,fman-rtc";
+				reg = <0xfe000 0x1000>;
+			};
+		};
+
+		dspi: dspi@2100000 {
+			compatible = "fsl,ls1046a-dspi", "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <5>;
+			big-endian;
+			status = "disabled";
+		};
+
+		qspi: quadspi@1550000 {
+			compatible = "fsl,ls1046a-qspi", "fsl,ls1021a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x1550000 0x0 0x10000>,
+				<0x0 0x40000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <0 99 0x4>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+			big-endian;
+			fsl,qspi-has-second-chip;
+			status = "disabled";
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			dmas = <&edma0 1 39>,
+			       <&edma0 1 38>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 1>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		gpio0: gpio@2300000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2300000 0x0 0x10000>;
+			interrupts = <0 66 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@2310000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2310000 0x0 0x10000>;
+			interrupts = <0 67 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@2320000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2320000 0x0 0x10000>;
+			interrupts = <0 68 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio@2330000 {
+			compatible = "fsl,qoriq-gpio";
+			reg = <0x0 0x2330000 0x0 0x10000>;
+			interrupts = <0 134 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		lpuart0: serial@2950000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2950000 0x0 0x1000>;
+			interrupts = <0 48 0x4>;
+			clocks = <&clockgen 0 0>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart1: serial@2960000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2960000 0x0 0x1000>;
+			interrupts = <0 49 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart2: serial@2970000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2970000 0x0 0x1000>;
+			interrupts = <0 50 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart3: serial@2980000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2980000 0x0 0x1000>;
+			interrupts = <0 51 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart4: serial@2990000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x2990000 0x0 0x1000>;
+			interrupts = <0 52 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		lpuart5: serial@29a0000 {
+			compatible = "fsl,ls1021a-lpuart";
+			reg = <0x0 0x29a0000 0x0 0x1000>;
+			interrupts = <0 53 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "ipg";
+			status = "disabled";
+		};
+
+		ftm0: ftm0@29d0000 {
+			compatible = "fsl,ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			interrupts = <0 86 0x4>;
+			big-endian;
+			rcpm-wakeup = <&rcpm 0x0 0x20000000>;
+			status = "okay";
+		};
+
+		wdog0: wdog@2ad0000 {
+			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
+			reg = <0x0 0x2ad0000 0x0 0x10000>;
+			interrupts = <0 83 0x4>;
+			clocks = <&clockgen 4 1>;
+			clock-names = "wdog";
+			big-endian;
+		};
+
+		edma0: edma@2c00000 {
+			#dma-cells = <2>;
+			compatible = "fsl,vf610-edma";
+			reg = <0x0 0x2c00000 0x0 0x10000>,
+			      <0x0 0x2c10000 0x0 0x10000>,
+			      <0x0 0x2c20000 0x0 0x10000>;
+			interrupts = <0 103 0x4>,
+				     <0 103 0x4>;
+			interrupt-names = "edma-tx", "edma-err";
+			dma-channels = <32>;
+			big-endian;
+			clock-names = "dmamux0", "dmamux1";
+			clocks = <&clockgen 4 1>,
+				 <&clockgen 4 1>;
+		};
+
+		usb0: usb3@2f00000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x2f00000 0x0 0x10000>;
+			interrupts = <0 60 0x4>;
+			dr_mode = "host";
+			configure-gfladj;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb1: usb3@3000000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3000000 0x0 0x10000>;
+			interrupts = <0 61 0x4>;
+			dr_mode = "host";
+			configure-gfladj;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		usb2: usb3@3100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <0 63 0x4>;
+			dr_mode = "host";
+			configure-gfladj;
+			snps,dis_rxdet_inp3_quirk;
+		};
+
+		sata: sata@3200000 {
+			compatible = "fsl,ls1046a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>;
+			interrupts = <0 69 0x4>;
+			clocks = <&clockgen 4 1>;
+		};
+
+		qdma: qdma@8380000 {
+			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
+			reg = <0x0 0x838f000 0x0 0x11000 /* Controller regs */
+			       0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+			interrupts = <0 152 0x4>,
+				     <0 39 0x4>;
+			interrupt-names = "qdma-error", "qdma-queue";
+			channels = <8>;
+			queues = <2>;
+			status-sizes = <64>;
+			queue-sizes = <64 64>;
+			big-endian;
+		};
+
+		msi1: msi-controller@1580000 {
+			compatible = "fsl,1s1046a-msi";
+			reg = <0x0 0x1580000 0x0 0x10000>;
+			msi-controller;
+			interrupts = <0 116 0x4>,
+				     <0 111 0x4>,
+				     <0 112 0x4>,
+				     <0 113 0x4>;
+		};
+
+		msi2: msi-controller@1590000 {
+			compatible = "fsl,1s1046a-msi";
+			reg = <0x0 0x1590000 0x0 0x10000>;
+			msi-controller;
+			interrupts = <0 126 0x4>,
+				     <0 121 0x4>,
+				     <0 122 0x4>,
+				     <0 123 0x4>;
+		};
+
+		msi3: msi-controller@15a0000 {
+			compatible = "fsl,1s1046a-msi";
+			reg = <0x0 0x15a0000 0x0 0x10000>;
+			msi-controller;
+			interrupts = <0 160 0x4>,
+				     <0 155 0x4>,
+				     <0 156 0x4>,
+				     <0 157 0x4>;
+		};
+
+		pcie@3400000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 118 0x4>, /* controller interrupt */
+				     <0 117 0x4>; /* PME interrupt */
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <4>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi1>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
+					<0000 0 0 2 &gic 0 110 0x4>,
+					<0000 0 0 3 &gic 0 110 0x4>,
+					<0000 0 0 4 &gic 0 110 0x4>;
+		};
+
+		pcie@3500000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
+			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 128 0x4>,
+				     <0 127 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi2>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
+					<0000 0 0 2 &gic 0 120 0x4>,
+					<0000 0 0 3 &gic 0 120 0x4>,
+					<0000 0 0 4 &gic 0 120 0x4>;
+		};
+
+		pcie@3600000 {
+			compatible = "fsl,ls1046a-pcie", "snps,dw-pcie";
+			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
+			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
+			reg-names = "regs", "config";
+			interrupts = <0 162 0x4>,
+				     <0 161 0x4>;
+			interrupt-names = "intr", "pme";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			num-lanes = <2>;
+			bus-range = <0x0 0xff>;
+			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
+				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+			msi-parent = <&msi3>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
+					<0000 0 0 2 &gic 0 154 0x4>,
+					<0000 0 0 3 &gic 0 154 0x4>,
+					<0000 0 0 4 &gic 0 154 0x4>;
+		};
+	};
+
+	fsl,dpaa {
+		compatible = "fsl,ls1046a-dpaa", "simple-bus", "fsl,dpaa";
+		ethernet@0 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac1>;
+		};
+		ethernet@1 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac2>;
+		};
+		ethernet@2 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac3>;
+		};
+		ethernet@3 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac4>;
+		};
+		ethernet@4 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac5>;
+		};
+		ethernet@5 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac6>;
+		};
+		ethernet@8 {
+			compatible = "fsl,dpa-ethernet";
+			fsl,fman-mac = <&fm1mac9>;
+		};
+	};
+
+	qportals: qman-portals@500000000 {
+		   ranges = <0x0 0x5 0x00000000 0x8000000>;
+        };
+	bportals: bman-portals@508000000 {
+		   ranges = <0x0 0x5 0x08000000 0x8000000>;
+        };
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x800000>;
+			alignment = <0 0x800000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+};
+
+&fman0 {
+	/* offline - 1 */
+	port@82000 {
+		fsl,qman-channel-id = <0x809>;
+	};
+
+	/* tx - 10g - 2 */
+	port@a8000 {
+		fsl,qman-channel-id = <0x802>;
+	};
+	/* tx - 10g - 3 */
+	port@a9000 {
+		fsl,qman-channel-id = <0x803>;
+	};
+	/* tx - 1g - 2 */
+	port@aa000 {
+		fsl,qman-channel-id = <0x804>;
+	};
+	/* tx - 1g - 3 */
+	port@ab000 {
+		fsl,qman-channel-id = <0x805>;
+	};
+	/* tx - 1g - 4 */
+	port@ac000 {
+		fsl,qman-channel-id = <0x806>;
+	};
+	/* tx - 1g - 5 */
+	port@ad000 {
+		fsl,qman-channel-id = <0x807>;
+	};
+	/* tx - 10g - 0 */
+	port@b0000 {
+		fsl,qman-channel-id = <0x800>;
+	};
+	/* tx - 10g - 1 */
+	port@b1000 {
+		fsl,qman-channel-id = <0x801>;
+	};
+	/* offline - 2 */
+	port@83000 {
+		fsl,qman-channel-id = <0x80a>;
+	};
+	/* offline - 3 */
+	port@84000 {
+		fsl,qman-channel-id = <0x80b>;
+	};
+	/* offline - 4 */
+	port@85000 {
+		fsl,qman-channel-id = <0x80c>;
+	};
+	/* offline - 5 */
+	port@86000 {
+		fsl,qman-channel-id = <0x80d>;
+	};
+	/* offline - 6 */
+	port@87000 {
+		fsl,qman-channel-id = <0x80e>;
+	};
+};
+
+&bman_fbpr {
+	compatible = "fsl,bman-fbpr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_fqd {
+	compatible = "fsl,qman-fqd";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+&qman_pfdr {
+	compatible = "fsl,qman-pfdr";
+	alloc-ranges = <0 0 0x10000 0>;
+};
+
+/include/ "qoriq-qman1-portals.dtsi"
+/include/ "qoriq-bman1-portals.dtsi"