| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136 |
- From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
- From: Dan Haab <dhaab@luxul.com>
- Date: Sat, 14 Jan 2017 19:29:28 -0700
- Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
- Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
- flash (for bootloader and NVRAM) and NAND flash (for firmware).
- Signed-off-by: Dan Haab <dhaab@luxul.com>
- Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- ---
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
- 2 files changed, 108 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm47081-luxul-xap-1410.dtb \
- + bcm47081-luxul-xwr-1200.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
- --- /dev/null
- +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
- @@ -0,0 +1,107 @@
- +/*
- + * Copyright 2017 Luxul Inc.
- + *
- + * Licensed under the ISC license.
- + */
- +
- +/dts-v1/;
- +
- +#include "bcm47081.dtsi"
- +#include "bcm5301x-nand-cs0-bch4.dtsi"
- +
- +/ {
- + compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
- + model = "Luxul XWR-1200 V1";
- +
- + chosen {
- + bootargs = "console=ttyS0,115200";
- + };
- +
- + memory {
- + reg = <0x00000000 0x08000000>;
- + };
- +
- + leds {
- + compatible = "gpio-leds";
- +
- + power {
- + label = "bcm53xx:green:power";
- + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "default-on";
- + };
- +
- + lan3 {
- + label = "bcm53xx:green:lan3";
- + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + lan4 {
- + label = "bcm53xx:green:lan4";
- + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + wan {
- + label = "bcm53xx:green:wan";
- + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + lan2 {
- + label = "bcm53xx:green:lan2";
- + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + usb {
- + label = "bcm53xx:green:usb";
- + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + status {
- + label = "bcm53xx:green:status";
- + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "timer";
- + };
- +
- + 2ghz {
- + label = "bcm53xx:green:2ghz";
- + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + 5ghz {
- + label = "bcm53xx:green:5ghz";
- + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- +
- + lan1 {
- + label = "bcm53xx:green:lan1";
- + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- + linux,default-trigger = "none";
- + };
- + };
- +
- + gpio-keys {
- + compatible = "gpio-keys";
- + #address-cells = <1>;
- + #size-cells = <0>;
- +
- + restart {
- + label = "Reset";
- + linux,code = <KEY_RESTART>;
- + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- + };
- + };
- +};
- +
- +&usb2 {
- + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- +};
- +
- +&spi_nor {
- + status = "okay";
- +};
|
