Accueil Explorer Aide
S'inscrire Connexion
wareck
/
openwrt_lede
1
0
Fork 0
Fichiers Tickets 0 Pull Requests 0 Wiki
Branche: master
Branches Tags
openwrt_lede
/
target
/
linux
/
bcm53xx
/
patches-4.4
/
047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch

047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch 16 KB
Lien permanent Historique Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651 
  1. From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001
    2. 

  2. From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
    3. 

  3. Date: Wed, 8 Mar 2017 07:41:05 +0100
    4. 

  4. Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED
    5. 

  5.  trigger
    6. 

  6. MIME-Version: 1.0
    7. 

  7. Content-Type: text/plain; charset=UTF-8
    8. 

  8. Content-Transfer-Encoding: 8bit
    9. 

  9. 

  10. Such a trigger doesn't exist in Linux and is not needed as LED is being
    11. 

  11. turned off by default. This could cause errors in LEDs core code when
    12. 

  12. trying to set default trigger.
    13. 

  13. 

  14. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
    15. 

  15. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
    16. 

  16. ---
    17. 

  17.  arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts        |  5 -----
    18. 

  18.  arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts        |  2 --
    19. 

  19.  arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  |  5 -----
    20. 

  20.  arch/arm/boot/dts/bcm4708-netgear-r6250.dts        |  3 ---
    21. 

  21.  arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts     |  3 ---
    22. 

  22.  arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts      | 10 ----------
    23. 

  23.  arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts        |  2 --
    24. 

  24.  arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts |  4 ----
    25. 

  25.  arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts        |  2 --
    26. 

  26.  arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts  |  8 --------
    27. 

  27.  arch/arm/boot/dts/bcm4709-netgear-r7000.dts        |  7 -------
    28. 

  28.  arch/arm/boot/dts/bcm4709-netgear-r8000.dts        |  9 ---------
    29. 

  29.  arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts  |  8 --------
    30. 

  30.  arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts      |  6 ------
    31. 

  31.  arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts      |  8 --------
    32. 

  32.  arch/arm/boot/dts/bcm47094-netgear-r8500.dts       |  6 ------
    33. 

  33.  16 files changed, 88 deletions(-)
    34. 

  34. 

  35. --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
    36. 

  36. +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
    37. 

  37. @@ -41,19 +41,16 @@
    38. 

  38.  		usb3 {
    39. 

  39.  			label = "bcm53xx:blue:usb3";
    40. 

  40.  			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
    41. 

  41. -			linux,default-trigger = "default-off";
    42. 

  42.  		};
    43. 

  43.  
    44. 

  44.  		wan {
    45. 

  45.  			label = "bcm53xx:blue:wan";
    46. 

  46.  			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
    47. 

  47. -			linux,default-trigger = "default-off";
    48. 

  48.  		};
    49. 

  49.  
    50. 

  50.  		lan {
    51. 

  51.  			label = "bcm53xx:blue:lan";
    52. 

  52.  			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
    53. 

  53. -			linux,default-trigger = "default-off";
    54. 

  54.  		};
    55. 

  55.  
    56. 

  56.  		power {
    57. 

  57. @@ -71,14 +68,12 @@
    58. 

  58.  		2ghz {
    59. 

  59.  			label = "bcm53xx:blue:2ghz";
    60. 

  60.  			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
    61. 

  61. -			linux,default-trigger = "default-off";
    62. 

  62.  		};
    63. 

  63.  
    64. 

  64.  
    65. 

  65.  		usb2 {
    66. 

  66.  			label = "bcm53xx:blue:usb2";
    67. 

  67.  			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
    68. 

  68. -			linux,default-trigger = "default-off";
    69. 

  69.  		};
    70. 

  70.  	};
    71. 

  71.  
    72. 

  72. --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
    73. 

  73. +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
    74. 

  74. @@ -41,7 +41,6 @@
    75. 

  75.  		usb2 {
    76. 

  76.  			label = "bcm53xx:blue:usb2";
    77. 

  77.  			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
    78. 

  78. -			linux,default-trigger = "default-off";
    79. 

  79.  		};
    80. 

  80.  
    81. 

  81.  		power {
    82. 

  82. @@ -59,7 +58,6 @@
    83. 

  83.  		usb3 {
    84. 

  84.  			label = "bcm53xx:blue:usb3";
    85. 

  85.  			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
    86. 

  86. -			linux,default-trigger = "default-off";
    87. 

  87.  		};
    88. 

  88.  	};
    89. 

  89.  
    90. 

  90. --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
    91. 

  91. +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
    92. 

  92. @@ -52,13 +52,11 @@
    93. 

  93.  		usb {
    94. 

  94.  			label = "bcm53xx:blue:usb";
    95. 

  95.  			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
    96. 

  96. -			linux,default-trigger = "default-off";
    97. 

  97.  		};
    98. 

  98.  
    99. 

  99.  		power0 {
    100. 

  100.  			label = "bcm53xx:red:power";
    101. 

  101.  			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
    102. 

  102. -			linux,default-trigger = "default-off";
    103. 

  103.  		};
    104. 

  104.  
    105. 

  105.  		power1 {
    106. 

  106. @@ -76,7 +74,6 @@
    107. 

  107.  		router1 {
    108. 

  108.  			label = "bcm53xx:amber:router";
    109. 

  109.  			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
    110. 

  110. -			linux,default-trigger = "default-off";
    111. 

  111.  		};
    112. 

  112.  
    113. 

  113.  		wan {
    114. 

  114. @@ -88,13 +85,11 @@
    115. 

  115.  		wireless0 {
    116. 

  116.  			label = "bcm53xx:blue:wireless";
    117. 

  117.  			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
    118. 

  118. -			linux,default-trigger = "default-off";
    119. 

  119.  		};
    120. 

  120.  
    121. 

  121.  		wireless1 {
    122. 

  122.  			label = "bcm53xx:amber:wireless";
    123. 

  123.  			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
    124. 

  124. -			linux,default-trigger = "default-off";
    125. 

  125.  		};
    126. 

  126.  	};
    127. 

  127.  
    128. 

  128. --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
    129. 

  129. +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
    130. 

  130. @@ -43,19 +43,16 @@
    131. 

  131.  		power1 {
    132. 

  132.  			label = "bcm53xx:amber:power";
    133. 

  133.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    134. 

  134. -			linux,default-trigger = "default-off";
    135. 

  135.  		};
    136. 

  136.  
    137. 

  137.  		usb {
    138. 

  138.  			label = "bcm53xx:blue:usb";
    139. 

  139.  			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
    140. 

  140. -			linux,default-trigger = "default-off";
    141. 

  141.  		};
    142. 

  142.  
    143. 

  143.  		wireless {
    144. 

  144.  			label = "bcm53xx:blue:wireless";
    145. 

  145.  			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
    146. 

  146. -			linux,default-trigger = "default-off";
    147. 

  147.  		};
    148. 

  148.  	};
    149. 

  149.  
    150. 

  150. --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
    151. 

  151. +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
    152. 

  152. @@ -47,7 +47,6 @@
    153. 

  153.  		power0 {
    154. 

  154.  			label = "bcm53xx:green:power";
    155. 

  155.  			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
    156. 

  156. -			linux,default-trigger = "default-off";
    157. 

  157.  		};
    158. 

  158.  
    159. 

  159.  		power1 {
    160. 

  160. @@ -59,13 +58,11 @@
    161. 

  161.  		usb {
    162. 

  162.  			label = "bcm53xx:blue:usb";
    163. 

  163.  			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
    164. 

  164. -			linux,default-trigger = "default-off";
    165. 

  165.  		};
    166. 

  166.  
    167. 

  167.  		wireless {
    168. 

  168.  			label = "bcm53xx:blue:wireless";
    169. 

  169.  			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
    170. 

  170. -			linux,default-trigger = "default-off";
    171. 

  171.  		};
    172. 

  172.  	};
    173. 

  173.  
    174. 

  174. --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
    175. 

  175. +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
    176. 

  176. @@ -37,61 +37,51 @@
    177. 

  177.  		power-amber {
    178. 

  178.  			label = "bcm53xx:amber:power";
    179. 

  179.  			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
    180. 

  180. -			linux,default-trigger = "default-off";
    181. 

  181.  		};
    182. 

  182.  
    183. 

  183.  		usb2 {
    184. 

  184.  			label = "bcm53xx:white:usb2";
    185. 

  185.  			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
    186. 

  186. -			linux,default-trigger = "default-off";
    187. 

  187.  		};
    188. 

  188.  
    189. 

  189.  		usb3-white {
    190. 

  190.  			label = "bcm53xx:white:usb3";
    191. 

  191.  			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
    192. 

  192. -			linux,default-trigger = "default-off";
    193. 

  193.  		};
    194. 

  194.  
    195. 

  195.  		usb3-green {
    196. 

  196.  			label = "bcm53xx:green:usb3";
    197. 

  197.  			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
    198. 

  198. -			linux,default-trigger = "default-off";
    199. 

  199.  		};
    200. 

  200.  
    201. 

  201.  		wps {
    202. 

  202.  			label = "bcm53xx:white:wps";
    203. 

  203.  			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
    204. 

  204. -			linux,default-trigger = "default-off";
    205. 

  205.  		};
    206. 

  206.  
    207. 

  207.  		status-red {
    208. 

  208.  			label = "bcm53xx:red:status";
    209. 

  209.  			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
    210. 

  210. -			linux,default-trigger = "default-off";
    211. 

  211.  		};
    212. 

  212.  
    213. 

  213.  		status-green {
    214. 

  214.  			label = "bcm53xx:green:status";
    215. 

  215.  			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
    216. 

  216. -			linux,default-trigger = "default-off";
    217. 

  217.  		};
    218. 

  218.  
    219. 

  219.  		status-blue {
    220. 

  220.  			label = "bcm53xx:blue:status";
    221. 

  221.  			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
    222. 

  222. -			linux,default-trigger = "default-off";
    223. 

  223.  		};
    224. 

  224.  
    225. 

  225.  		wan-white {
    226. 

  226.  			label = "bcm53xx:white:wan";
    227. 

  227.  			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
    228. 

  228. -			linux,default-trigger = "default-off";
    229. 

  229.  		};
    230. 

  230.  
    231. 

  231.  		wan-red {
    232. 

  232.  			label = "bcm53xx:red:wan";
    233. 

  233.  			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
    234. 

  234. -			linux,default-trigger = "default-off";
    235. 

  235.  		};
    236. 

  236.  	};
    237. 

  237.  
    238. 

  238. --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
    239. 

  239. +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
    240. 

  240. @@ -47,7 +47,6 @@
    241. 

  241.  		usb2 {
    242. 

  242.  			label = "bcm53xx:blue:usb2";
    243. 

  243.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    244. 

  244. -			linux,default-trigger = "default-off";
    245. 

  245.  		};
    246. 

  246.  
    247. 

  247.  		wan {
    248. 

  248. @@ -65,7 +64,6 @@
    249. 

  249.  		usb3 {
    250. 

  250.  			label = "bcm53xx:blue:usb3";
    251. 

  251.  			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
    252. 

  252. -			linux,default-trigger = "default-off";
    253. 

  253.  		};
    254. 

  254.  	};
    255. 

  255.  
    256. 

  256. --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
    257. 

  257. +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
    258. 

  258. @@ -68,7 +68,6 @@
    259. 

  259.  		power1 {
    260. 

  260.  			label = "bcm53xx:red:power";
    261. 

  261.  			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
    262. 

  262. -			linux,default-trigger = "default-off";
    263. 

  263.  		};
    264. 

  264.  
    265. 

  265.  		router0 {
    266. 

  266. @@ -80,7 +79,6 @@
    267. 

  267.  		router1 {
    268. 

  268.  			label = "bcm53xx:amber:router";
    269. 

  269.  			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
    270. 

  270. -			linux,default-trigger = "default-off";
    271. 

  271.  		};
    272. 

  272.  
    273. 

  273.  		wan {
    274. 

  274. @@ -92,13 +90,11 @@
    275. 

  275.  		wireless0 {
    276. 

  276.  			label = "bcm53xx:green:wireless";
    277. 

  277.  			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
    278. 

  278. -			linux,default-trigger = "default-off";
    279. 

  279.  		};
    280. 

  280.  
    281. 

  281.  		wireless1 {
    282. 

  282.  			label = "bcm53xx:amber:wireless";
    283. 

  283.  			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
    284. 

  284. -			linux,default-trigger = "default-off";
    285. 

  285.  		};
    286. 

  286.  	};
    287. 

  287.  
    288. 

  288. --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
    289. 

  289. +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
    290. 

  290. @@ -41,7 +41,6 @@
    291. 

  291.  		wps {
    292. 

  292.  			label = "bcm53xx:blue:wps";
    293. 

  293.  			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
    294. 

  294. -			linux,default-trigger = "default-off";
    295. 

  295.  		};
    296. 

  296.  
    297. 

  297.  		power {
    298. 

  298. @@ -53,7 +52,6 @@
    299. 

  299.  		wan {
    300. 

  300.  			label = "bcm53xx:red:wan";
    301. 

  301.  			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
    302. 

  302. -			linux,default-trigger = "default-off";
    303. 

  303.  		};
    304. 

  304.  	};
    305. 

  305.  
    306. 

  306. --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
    307. 

  307. +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
    308. 

  308. @@ -31,13 +31,11 @@
    309. 

  309.  		usb {
    310. 

  310.  			label = "bcm53xx:green:usb";
    311. 

  311.  			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
    312. 

  312. -			linux,default-trigger = "default-off";
    313. 

  313.  		};
    314. 

  314.  
    315. 

  315.  		power-amber {
    316. 

  316.  			label = "bcm53xx:amber:power";
    317. 

  317.  			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
    318. 

  318. -			linux,default-trigger = "default-off";
    319. 

  319.  		};
    320. 

  320.  
    321. 

  321.  		power-white {
    322. 

  322. @@ -49,37 +47,31 @@
    323. 

  323.  		router-amber {
    324. 

  324.  			label = "bcm53xx:amber:router";
    325. 

  325.  			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
    326. 

  326. -			linux,default-trigger = "default-off";
    327. 

  327.  		};
    328. 

  328.  
    329. 

  329.  		router-white {
    330. 

  330.  			label = "bcm53xx:white:router";
    331. 

  331.  			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
    332. 

  332. -			linux,default-trigger = "default-off";
    333. 

  333.  		};
    334. 

  334.  
    335. 

  335.  		wan-amber {
    336. 

  336.  			label = "bcm53xx:amber:wan";
    337. 

  337.  			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
    338. 

  338. -			linux,default-trigger = "default-off";
    339. 

  339.  		};
    340. 

  340.  
    341. 

  341.  		wan-white {
    342. 

  342.  			label = "bcm53xx:white:wan";
    343. 

  343.  			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
    344. 

  344. -			linux,default-trigger = "default-off";
    345. 

  345.  		};
    346. 

  346.  
    347. 

  347.  		wireless-amber {
    348. 

  348.  			label = "bcm53xx:amber:wireless";
    349. 

  349.  			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
    350. 

  350. -			linux,default-trigger = "default-off";
    351. 

  351.  		};
    352. 

  352.  
    353. 

  353.  		wireless-white {
    354. 

  354.  			label = "bcm53xx:white:wireless";
    355. 

  355.  			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
    356. 

  356. -			linux,default-trigger = "default-off";
    357. 

  357.  		};
    358. 

  358.  	};
    359. 

  359.  
    360. 

  360. --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
    361. 

  361. +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
    362. 

  362. @@ -47,43 +47,36 @@
    363. 

  363.  		power-amber {
    364. 

  364.  			label = "bcm53xx:amber:power";
    365. 

  365.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    366. 

  366. -			linux,default-trigger = "default-off";
    367. 

  367.  		};
    368. 

  368.  
    369. 

  369.  		5ghz {
    370. 

  370.  			label = "bcm53xx:white:5ghz";
    371. 

  371.  			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
    372. 

  372. -			linux,default-trigger = "default-off";
    373. 

  373.  		};
    374. 

  374.  
    375. 

  375.  		2ghz {
    376. 

  376.  			label = "bcm53xx:white:2ghz";
    377. 

  377.  			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
    378. 

  378. -			linux,default-trigger = "default-off";
    379. 

  379.  		};
    380. 

  380.  
    381. 

  381.  		wps {
    382. 

  382.  			label = "bcm53xx:white:wps";
    383. 

  383.  			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
    384. 

  384. -			linux,default-trigger = "default-off";
    385. 

  385.  		};
    386. 

  386.  
    387. 

  387.  		wireless {
    388. 

  388.  			label = "bcm53xx:white:wireless";
    389. 

  389.  			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
    390. 

  390. -			linux,default-trigger = "default-off";
    391. 

  391.  		};
    392. 

  392.  
    393. 

  393.  		usb3 {
    394. 

  394.  			label = "bcm53xx:white:usb3";
    395. 

  395.  			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
    396. 

  396. -			linux,default-trigger = "default-off";
    397. 

  397.  		};
    398. 

  398.  
    399. 

  399.  		usb2 {
    400. 

  400.  			label = "bcm53xx:white:usb2";
    401. 

  401.  			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
    402. 

  402. -			linux,default-trigger = "default-off";
    403. 

  403.  		};
    404. 

  404.  	};
    405. 

  405.  
    406. 

  406. --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
    407. 

  407. +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
    408. 

  408. @@ -47,7 +47,6 @@
    409. 

  409.  		power-amber {
    410. 

  410.  			label = "bcm53xx:amber:power";
    411. 

  411.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    412. 

  412. -			linux,default-trigger = "default-off";
    413. 

  413.  		};
    414. 

  414.  
    415. 

  415.  		wan-white {
    416. 

  416. @@ -59,49 +58,41 @@
    417. 

  417.  		wan-amber {
    418. 

  418.  			label = "bcm53xx:amber:wan";
    419. 

  419.  			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
    420. 

  420. -			linux,default-trigger = "default-off";
    421. 

  421.  		};
    422. 

  422.  
    423. 

  423.  		5ghz-1 {
    424. 

  424.  			label = "bcm53xx:white:5ghz-1";
    425. 

  425.  			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
    426. 

  426. -			linux,default-trigger = "default-off";
    427. 

  427.  		};
    428. 

  428.  
    429. 

  429.  		2ghz {
    430. 

  430.  			label = "bcm53xx:white:2ghz";
    431. 

  431.  			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
    432. 

  432. -			linux,default-trigger = "default-off";
    433. 

  433.  		};
    434. 

  434.  
    435. 

  435.  		wireless {
    436. 

  436.  			label = "bcm53xx:white:wireless";
    437. 

  437.  			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
    438. 

  438. -			linux,default-trigger = "default-off";
    439. 

  439.  		};
    440. 

  440.  
    441. 

  441.  		wps {
    442. 

  442.  			label = "bcm53xx:white:wps";
    443. 

  443.  			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
    444. 

  444. -			linux,default-trigger = "default-off";
    445. 

  445.  		};
    446. 

  446.  
    447. 

  447.  		5ghz-2 {
    448. 

  448.  			label = "bcm53xx:white:5ghz-2";
    449. 

  449.  			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
    450. 

  450. -			linux,default-trigger = "default-off";
    451. 

  451.  		};
    452. 

  452.  
    453. 

  453.  		usb3 {
    454. 

  454.  			label = "bcm53xx:white:usb3";
    455. 

  455.  			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
    456. 

  456. -			linux,default-trigger = "default-off";
    457. 

  457.  		};
    458. 

  458.  
    459. 

  459.  		usb2 {
    460. 

  460.  			label = "bcm53xx:white:usb2";
    461. 

  461.  			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
    462. 

  462. -			linux,default-trigger = "default-off";
    463. 

  463.  		};
    464. 

  464.  	};
    465. 

  465.  
    466. 

  466. --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
    467. 

  467. +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
    468. 

  468. @@ -26,49 +26,41 @@
    469. 

  469.  		lan {
    470. 

  470.  			label = "bcm53xx:blue:lan";
    471. 

  471.  			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
    472. 

  472. -			linux,default-trigger = "default-off";
    473. 

  473.  		};
    474. 

  474.  
    475. 

  475.  		wps {
    476. 

  476.  			label = "bcm53xx:blue:wps";
    477. 

  477.  			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
    478. 

  478. -			linux,default-trigger = "default-off";
    479. 

  479.  		};
    480. 

  480.  
    481. 

  481.  		2ghz {
    482. 

  482.  			label = "bcm53xx:blue:2ghz";
    483. 

  483.  			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
    484. 

  484. -			linux,default-trigger = "default-off";
    485. 

  485.  		};
    486. 

  486.  
    487. 

  487.  		5ghz {
    488. 

  488.  			label = "bcm53xx:blue:5ghz";
    489. 

  489.  			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
    490. 

  490. -			linux,default-trigger = "default-off";
    491. 

  491.  		};
    492. 

  492.  
    493. 

  493.  		usb3 {
    494. 

  494.  			label = "bcm53xx:blue:usb3";
    495. 

  495.  			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
    496. 

  496. -			linux,default-trigger = "default-off";
    497. 

  497.  		};
    498. 

  498.  
    499. 

  499.  		usb2 {
    500. 

  500.  			label = "bcm53xx:blue:usb2";
    501. 

  501.  			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
    502. 

  502. -			linux,default-trigger = "default-off";
    503. 

  503.  		};
    504. 

  504.  
    505. 

  505.  		wan-blue {
    506. 

  506.  			label = "bcm53xx:blue:wan";
    507. 

  507.  			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
    508. 

  508. -			linux,default-trigger = "default-off";
    509. 

  509.  		};
    510. 

  510.  
    511. 

  511.  		wan-amber {
    512. 

  512.  			label = "bcm53xx:amber:wan";
    513. 

  513.  			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
    514. 

  514. -			linux,default-trigger = "default-off";
    515. 

  515.  		};
    516. 

  516.  
    517. 

  517.  		power {
    518. 

  518. --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
    519. 

  519. +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
    520. 

  520. @@ -56,37 +56,31 @@
    521. 

  521.  		wan-white {
    522. 

  522.  			label = "bcm53xx:white:wan";
    523. 

  523.  			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
    524. 

  524. -			linux,default-trigger = "default-off";
    525. 

  525.  		};
    526. 

  526.  
    527. 

  527.  		power-amber {
    528. 

  528.  			label = "bcm53xx:amber:power";
    529. 

  529.  			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
    530. 

  530. -			linux,default-trigger = "default-off";
    531. 

  531.  		};
    532. 

  532.  
    533. 

  533.  		wan-amber {
    534. 

  534.  			label = "bcm53xx:amber:wan";
    535. 

  535.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    536. 

  536. -			linux,default-trigger = "default-off";
    537. 

  537.  		};
    538. 

  538.  
    539. 

  539.  		usb3-white {
    540. 

  540.  			label = "bcm53xx:white:usb3";
    541. 

  541.  			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
    542. 

  542. -			linux,default-trigger = "default-off";
    543. 

  543.  		};
    544. 

  544.  
    545. 

  545.  		2ghz {
    546. 

  546.  			label = "bcm53xx:white:2ghz";
    547. 

  547.  			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
    548. 

  548. -			linux,default-trigger = "default-off";
    549. 

  549.  		};
    550. 

  550.  
    551. 

  551.  		5ghz {
    552. 

  552.  			label = "bcm53xx:white:5ghz";
    553. 

  553.  			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
    554. 

  554. -			linux,default-trigger = "default-off";
    555. 

  555.  		};
    556. 

  556.  	};
    557. 

  557.  
    558. 

  558. --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
    559. 

  559. +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
    560. 

  560. @@ -34,37 +34,31 @@
    561. 

  561.  		lan3	{
    562. 

  562.  			label = "bcm53xx:green:lan3";
    563. 

  563.  			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
    564. 

  564. -			linux,default-trigger = "default-off";
    565. 

  565.  		};
    566. 

  566.  
    567. 

  567.  		lan4	{
    568. 

  568.  			label = "bcm53xx:green:lan4";
    569. 

  569.  			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
    570. 

  570. -			linux,default-trigger = "default-off";
    571. 

  571.  		};
    572. 

  572.  
    573. 

  573.  		wan	{
    574. 

  574.  			label = "bcm53xx:green:wan";
    575. 

  575.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    576. 

  576. -			linux,default-trigger = "default-off";
    577. 

  577.  		};
    578. 

  578.  
    579. 

  579.  		lan1	{
    580. 

  580.  			label = "bcm53xx:green:lan1";
    581. 

  581.  			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
    582. 

  582. -			linux,default-trigger = "default-off";
    583. 

  583.  		};
    584. 

  584.  
    585. 

  585.  		lan2	{
    586. 

  586.  			label = "bcm53xx:green:lan2";
    587. 

  587.  			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
    588. 

  588. -			linux,default-trigger = "default-off";
    589. 

  589.  		};
    590. 

  590.  
    591. 

  591.  		usb3	{
    592. 

  592.  			label = "bcm53xx:green:usb3";
    593. 

  593.  			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
    594. 

  594. -			linux,default-trigger = "default-off";
    595. 

  595.  		};
    596. 

  596.  
    597. 

  597.  		status	{
    598. 

  598. @@ -76,13 +70,11 @@
    599. 

  599.  		2ghz {
    600. 

  600.  			label = "bcm53xx:green:2ghz";
    601. 

  601.  			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
    602. 

  602. -			linux,default-trigger = "default-off";
    603. 

  603.  		};
    604. 

  604.  
    605. 

  605.  		5ghz {
    606. 

  606.  			label = "bcm53xx:green:5ghz";
    607. 

  607.  			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
    608. 

  608. -			linux,default-trigger = "default-off";
    609. 

  609.  		};
    610. 

  610.  	};
    611. 

  611.  
    612. 

  612. --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
    613. 

  613. +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
    614. 

  614. @@ -34,37 +34,31 @@
    615. 

  615.  		power1 {
    616. 

  616.  			label = "bcm53xx:amber:power";
    617. 

  617.  			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
    618. 

  618. -			linux,default-trigger = "default-off";
    619. 

  619.  		};
    620. 

  620.  
    621. 

  621.  		5ghz-1 {
    622. 

  622.  			label = "bcm53xx:white:5ghz-1";
    623. 

  623.  			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
    624. 

  624. -			linux,default-trigger = "default-off";
    625. 

  625.  		};
    626. 

  626.  
    627. 

  627.  		5ghz-2 {
    628. 

  628.  			label = "bcm53xx:white:5ghz-2";
    629. 

  629.  			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
    630. 

  630. -			linux,default-trigger = "default-off";
    631. 

  631.  		};
    632. 

  632.  
    633. 

  633.  		2ghz {
    634. 

  634.  			label = "bcm53xx:white:2ghz";
    635. 

  635.  			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
    636. 

  636. -			linux,default-trigger = "default-off";
    637. 

  637.  		};
    638. 

  638.  
    639. 

  639.  		usb2 {
    640. 

  640.  			label = "bcm53xx:white:usb2";
    641. 

  641.  			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
    642. 

  642. -			linux,default-trigger = "default-off";
    643. 

  643.  		};
    644. 

  644.  
    645. 

  645.  		usb3 {
    646. 

  646.  			label = "bcm53xx:white:usb3";
    647. 

  647.  			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
    648. 

  648. -			linux,default-trigger = "default-off";
    649. 

  649.  		};
    650. 

  650.  	};
    651. 

  651.  
    652.