| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216 |
- From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
- From: Mathieu Olivari <mathieu@codeaurora.org>
- Date: Mon, 11 May 2015 12:29:18 -0700
- Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
- Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
- ---
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
- arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 86 ++++++++++++++++++++++++++++++++
- 3 files changed, 160 insertions(+)
- --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
- +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
- @@ -75,6 +75,16 @@
- bias-disable;
- };
- };
- +
- + rgmii2_pins: rgmii2_pins {
- + mux {
- + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- + function = "rgmii2";
- + drive-strength = <8>;
- + bias-disable;
- + };
- + };
- };
-
- gsbi@16300000 {
- @@ -198,6 +208,31 @@
- reg = <4>;
- };
- };
- +
- + gmac1: ethernet@37200000 {
- + status = "ok";
- + phy-mode = "rgmii";
- + qcom,id = <1>;
- +
- + pinctrl-0 = <&rgmii2_pins>;
- + pinctrl-names = "default";
- +
- + fixed-link {
- + speed = <1000>;
- + full-duplex;
- + };
- + };
- +
- + gmac2: ethernet@37400000 {
- + status = "ok";
- + phy-mode = "sgmii";
- + qcom,id = <2>;
- +
- + fixed-link {
- + speed = <1000>;
- + full-duplex;
- + };
- + };
- };
- };
-
- --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
- +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
- @@ -48,6 +48,14 @@
- bias-disable;
- };
- };
- +
- + rgmii0_pins: rgmii0_pins {
- + mux {
- + pins = "gpio2", "gpio66";
- + drive-strength = <8>;
- + bias-disable;
- + };
- + };
- };
-
- gsbi2: gsbi@12480000 {
- @@ -189,5 +197,40 @@
- reg = <7>;
- };
- };
- +
- + gmac0: ethernet@37000000 {
- + status = "ok";
- + phy-mode = "rgmii";
- + qcom,id = <0>;
- + phy-handle = <&phy4>;
- +
- + pinctrl-0 = <&rgmii0_pins>;
- + pinctrl-names = "default";
- + };
- +
- + gmac1: ethernet@37200000 {
- + status = "ok";
- + phy-mode = "sgmii";
- + qcom,id = <1>;
- +
- + fixed-link {
- + speed = <1000>;
- + full-duplex;
- + };
- + };
- +
- + gmac2: ethernet@37400000 {
- + status = "ok";
- + phy-mode = "sgmii";
- + qcom,id = <2>;
- + phy-handle = <&phy6>;
- + };
- +
- + gmac3: ethernet@37600000 {
- + status = "ok";
- + phy-mode = "sgmii";
- + qcom,id = <3>;
- + phy-handle = <&phy7>;
- + };
- };
- };
- --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
- +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
- @@ -917,6 +917,92 @@
-
- status = "disabled";
- };
- +
- + nss_common: syscon@03000000 {
- + compatible = "syscon";
- + reg = <0x03000000 0x0000FFFF>;
- + };
- +
- + qsgmii_csr: syscon@1bb00000 {
- + compatible = "syscon";
- + reg = <0x1bb00000 0x000001FF>;
- + };
- +
- + gmac0: ethernet@37000000 {
- + device_type = "network";
- + compatible = "qcom,ipq806x-gmac";
- + reg = <0x37000000 0x200000>;
- + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- + interrupt-names = "macirq";
- +
- + qcom,nss-common = <&nss_common>;
- + qcom,qsgmii-csr = <&qsgmii_csr>;
- +
- + clocks = <&gcc GMAC_CORE1_CLK>;
- + clock-names = "stmmaceth";
- +
- + resets = <&gcc GMAC_CORE1_RESET>;
- + reset-names = "stmmaceth";
- +
- + status = "disabled";
- + };
- +
- + gmac1: ethernet@37200000 {
- + device_type = "network";
- + compatible = "qcom,ipq806x-gmac";
- + reg = <0x37200000 0x200000>;
- + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- + interrupt-names = "macirq";
- +
- + qcom,nss-common = <&nss_common>;
- + qcom,qsgmii-csr = <&qsgmii_csr>;
- +
- + clocks = <&gcc GMAC_CORE2_CLK>;
- + clock-names = "stmmaceth";
- +
- + resets = <&gcc GMAC_CORE2_RESET>;
- + reset-names = "stmmaceth";
- +
- + status = "disabled";
- + };
- +
- + gmac2: ethernet@37400000 {
- + device_type = "network";
- + compatible = "qcom,ipq806x-gmac";
- + reg = <0x37400000 0x200000>;
- + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- + interrupt-names = "macirq";
- +
- + qcom,nss-common = <&nss_common>;
- + qcom,qsgmii-csr = <&qsgmii_csr>;
- +
- + clocks = <&gcc GMAC_CORE3_CLK>;
- + clock-names = "stmmaceth";
- +
- + resets = <&gcc GMAC_CORE3_RESET>;
- + reset-names = "stmmaceth";
- +
- + status = "disabled";
- + };
- +
- + gmac3: ethernet@37600000 {
- + device_type = "network";
- + compatible = "qcom,ipq806x-gmac";
- + reg = <0x37600000 0x200000>;
- + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- + interrupt-names = "macirq";
- +
- + qcom,nss-common = <&nss_common>;
- + qcom,qsgmii-csr = <&qsgmii_csr>;
- +
- + clocks = <&gcc GMAC_CORE4_CLK>;
- + clock-names = "stmmaceth";
- +
- + resets = <&gcc GMAC_CORE4_RESET>;
- + reset-names = "stmmaceth";
- +
- + status = "disabled";
- + };
- };
-
- sfpb_mutex: sfpb-mutex {
|
