| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130 |
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -175,6 +175,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-ds411.dtb \
- kirkwood-ds411j.dtb \
- kirkwood-ds411slim.dtb \
- + kirkwood-goflexhome.dtb \
- kirkwood-goflexnet.dtb \
- kirkwood-guruplug-server-plus.dtb \
- kirkwood-ib62x0.dtb \
- --- /dev/null
- +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
- @@ -0,0 +1,117 @@
- +/dts-v1/;
- +
- +#include "kirkwood.dtsi"
- +#include "kirkwood-6281.dtsi"
- +
- +/ {
- + model = "Seagate GoFlex Home";
- + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
- +
- + memory {
- + device_type = "memory";
- + reg = <0x00000000 0x8000000>;
- + };
- +
- + chosen {
- + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
- + stdout-path = &uart0;
- + };
- +
- + ocp@f1000000 {
- + pinctrl: pin-controller@10000 {
- + pmx_usb_power_enable: pmx-usb-power-enable {
- + marvell,pins = "mpp29";
- + marvell,function = "gpio";
- + };
- + pmx_led_white: pmx-led-white {
- + marvell,pins = "mpp40";
- + marvell,function = "gpio";
- + };
- + pmx_led_green: pmx-led_green {
- + marvell,pins = "mpp46";
- + marvell,function = "gpio";
- + };
- + pmx_led_orange: pmx-led-orange {
- + marvell,pins = "mpp47";
- + marvell,function = "gpio";
- + };
- + };
- + serial@12000 {
- + status = "ok";
- + };
- +
- + sata@80000 {
- + status = "okay";
- + nr-ports = <2>;
- + };
- +
- + };
- + gpio-leds {
- + compatible = "gpio-leds";
- +
- + health {
- + label = "status:green:health";
- + gpios = <&gpio1 14 1>;
- + linux,default-trigger = "default-on";
- + };
- + fault {
- + label = "status:orange:fault";
- + gpios = <&gpio1 15 1>;
- + };
- + misc {
- + label = "status:white:misc";
- + gpios = <&gpio1 8 1>;
- + linux,default-trigger = "ide-disk";
- + };
- + };
- + regulators {
- + compatible = "simple-bus";
- + #address-cells = <1>;
- + #size-cells = <0>;
- + pinctrl-0 = <&pmx_usb_power_enable>;
- + pinctrl-names = "default";
- +
- + usb_power: regulator@1 {
- + compatible = "regulator-fixed";
- + reg = <1>;
- + regulator-name = "USB Power";
- + regulator-min-microvolt = <5000000>;
- + regulator-max-microvolt = <5000000>;
- + enable-active-high;
- + regulator-always-on;
- + regulator-boot-on;
- + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- + };
- + };
- +};
- +
- +&nand {
- + chip-delay = <40>;
- + status = "okay";
- +
- + partition@0 {
- + label = "u-boot";
- + reg = <0x0000000 0x100000>;
- + read-only;
- + };
- +
- + partition@100000 {
- + label = "ubi";
- + reg = <0x100000 0x0ff00000>;
- + };
- +};
- +
- +&mdio {
- + status = "okay";
- +
- + ethphy0: ethernet-phy@0 {
- + reg = <0>;
- + };
- +};
- +
- +ð0 {
- + status = "okay";
- + ethernet0-port@0 {
- + phy-handle = <ðphy0>;
- + };
- +};
|
