123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228 |
- /dts-v1/;
- #include "danube.dtsi"
- #include <dt-bindings/input/input.h>
- / {
- model = "ARV7519PW - Astoria Networks";
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
- aliases {
- led-boot = &power;
- led-failsafe = &power2;
- led-running = &power;
- led-dsl = &dsl;
- led-internet = &online;
- led-wifi = &wifi;
- };
- memory@0 {
- reg = <0x0 0x4000000>;
- };
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- };
- };
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x00000 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "uboot_env";
- reg = <0x40000 0x20000>;
- };
- partition@60000 {
- label = "firmware";
- reg = <0x60000 0xf80000>;
- };
- boardconfig: partition@fe0000 {
- label = "board_config";
- reg = <0xfe0000 0x20000>;
- read-only;
- };
- };
- };
- };
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
- state_default: pinmux {
- ebu {
- lantiq,groups = "ebu cs1";
- lantiq,function = "ebu";
- };
- pci_in {
- lantiq,groups = "req1";
- lantiq,function = "pci";
- lantiq,open-drain = <1>;
- lantiq,pull = <2>;
- lantiq,output = <0>;
- };
- pci_out {
- lantiq,groups = "gnt1";
- lantiq,function = "pci";
- lantiq,pull = <0>;
- lantiq,output = <1>;
- };
- pci_rst {
- lantiq,pins = "io21";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- switch_rst {
- lantiq,pins = "io19";
- lantiq,pull = <2>;
- lantiq,output = <1>;
- };
- };
- };
- etop@E180000 {
- phy-mode = "mii";
- mtd-mac-address = <&boardconfig 0x16>;
- };
- /* warning: passive port
- only works with active devices */
- ifxhcd@E101000 {
- status = "okay";
- };
- };
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
- rfkill {
- label = "rfkill";
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- reset {
- label = "reset";
- gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
- gpio-leds {
- compatible = "gpio-leds";
- power: power {
- label = "power";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
- power2: power2 {
- label = "power2";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- };
- online: online {
- label = "online";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- online2 {
- label = "online2";
- gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
- };
- wifi: wifi {
- label = "wifi";
- gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
- };
- wifi2 {
- label = "wifi2";
- gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
- };
- wifi3 {
- label = "wifi3";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- };
- voice {
- label = "voice";
- gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
- };
- wps {
- label = "wps";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- };
- wps2 {
- label = "wps2";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- };
- wps3 {
- label = "wps3";
- gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
- };
- dsl: dsl {
- label = "dsl";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
- lan {
- label = "lan";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- tv {
- label = "tv";
- gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- };
- upgrade {
- label = "upgrade";
- gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
- };
- };
- /* is there another way to "reserve" the GPIO? */
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
- };
- &pci0 {
- status = "okay";
- lantiq,external-clock;
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- req-mask = <0xf>;
- wifi@0,0 {
- compatible = "pci0,0";
- reg = <0x7000 0 0 0 0>;
- ralink,mtd-eeprom = <&boardconfig 0x410>;
- ralink,mtd-eeprom-swap;
- };
- };
|