123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121 |
- /dts-v1/;
- #include "danube.dtsi"
- #include <dt-bindings/input/input.h>
- / {
- model = "GIGASX76X - Gigaset SX761,SX762,SX763";
- chosen {
- bootargs = "console=ttyLTQ0,115200";
- };
- memory@0 {
- reg = <0x0 0x2000000>;
- };
- sram@1F000000 {
- vmmc@107000 {
- status = "okay";
- gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>;
- };
- };
- fpi@10000000 {
- localbus@0 {
- nor-boot@0 {
- compatible = "lantiq,nor";
- bank-width = <2>;
- reg = <0 0x0 0x2000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- };
- partition@10000 {
- label = "uboot_env";
- reg = <0x30000 0x10000>;
- };
- partition@40000 {
- label = "firmware";
- reg = <0x40000 0x7c0000>;
- };
- };
- };
- gpiomm: gpiomm@4000000 {
- compatible = "lantiq,gpio-mm";
- reg = <1 0x0 0x10 >;
- #address-cells = <1>;
- #size-cells = <1>;
- #gpio-cells = <2>;
- gpio-controller;
- lantiq,shadow = <0x3>;
- };
- };
- gpio: pinmux@E100B10 {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
- state_default: pinmux {
- stp {
- lantiq,groups = "stp";
- lantiq,function = "stp";
- };
- };
- };
- gpios: stp@E100BB0 {
- status = "okay";
- };
- etop@E180000 {
- phy-mode = "rmii";
- };
- ifxhcd@E101000 {
- status = "okay";
- gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
- };
- pci@E105400 {
- status = "okay";
- gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
- };
- };
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
- reset {
- label = "reset";
- gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
- gpio_export {
- compatible = "gpio-export";
- #size-cells = <0>;
- switch {
- gpio-export,name = "switch";
- gpio-export,output = <1>;
- gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
- };
- };
- };
|