#!/bin/bash
sudo apt-get update
sudo apt-get install python3-pip -y
sudo apt-get install python3-pil -y
sudo pip3 install adafruit-circuitpython-ssd1306
pip3 install RPI.GPIO
pip3 install adafruit-blinka
sudo apt-get install -y python3 git python3-pip
sudo update-alternatives --install /usr/bin/python python $(which python2) 1
sudo update-alternatives --install /usr/bin/python python $(which python3) 2
sudo update-alternatives --config python
sudo raspi-config
git clone https://github.com/adafruit/Adafruit_CircuitPython_SSD1306.git
cat <<'EOF'>> check.py
import board
import digitalio
import busio
print("Hello PiCore!")
# Try to great a Digital input
pin = digitalio.DigitalInOut(board.D4)
print("Digital IO ok!")
# Try to create an I2C device
i2c = busio.I2C(board.SCL, board.SDA)
print("I2C ok!")
# Try to create an SPI device
spi = busio.SPI(board.SCLK, board.MOSI, board.MISO)
print("SPI ok!")
print("done!")
EOF
clear
python check.py